3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA122UA
Texas Instruments · Instrumentation Amplifiers · SOP-8
INA122UA from Texas Instruments, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RG | passive | Gain setting pin; place a gain resistor between pin 1 and pin 8. |
| 2 | -IN | input | Negative (inverting) input. |
| 3 | +IN | input | Positive (noninverting) input. |
| 4 | -VS | power_in | Negative (lowest) power supply. |
| 5 | REF | input | Reference input; this pin must be driven by a low-impedance source. |
| 6 | OUT | output | Output. |
| 7 | +VS | power_in | Positive (highest) power supply. |
| 8 | RG | passive | Gain setting pin; place a gain resistor between pin 1 and pin 8. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Offset voltage (RTI) | VOS | -500 | 500 | µV | TA = 25°C, VS = +5V, RL = 20kΩ to VS/2, VREF = 0V, INA122PA, UA | 6 | |
| Offset voltage drift (RTI) | -5 | 5 | µV/℃ | TA = -40°C to +85°C, INA122PA, UA | 6 | ||
| Input offset current | IOS | -5 | 5 | nA | VCM = VS / 2, INA122PA, UA | 6 | |
| Input offset current drift | -40 | 40 | pA/℃ | TA = -40°C to +85°C | 6 | ||
| Input bias current | IB | -50 | -10 | nA | VCM = VS / 2, INA122PA, UA | 6 | |
| Power-supply rejection ratio (RTI) | PSRR | 10 | 100 | µV/V | VS = 2.2V to 36V, INA122PA, UA | 6 | |
| Operating input range | VCM | 0 | 3.4 | V | 6 | ||
| Common-mode rejection ratio (RTI) | CMRR | 76 | 96 | dB | VCM = 0V to 3.4V, INA122PA, UA | 6 | |
| Gain | G | 5 | 10000 | V/V | 7 | ||
| Gain error | GE | -0.15 | 0.15 | % | G = 5, VO = ±10V, INA122PA, UA | 7 | |
| Gain error | GE | -1 | 1 | % | G = 100, VO = ±10V, INA122PA, UA | 7 | |
| Gain vs temperature | -10 | 10 | ppm/°C | G = 5 | 7 | ||
| Gain vs temperature | -100 | 100 | ppm/°C | G = 100 | 7 | ||
| Gain nonlinearity | -0.024 | 0.024 | % of FSR | G = 100, VO = -14.85V to +14.9V, INA122PA, UA | 7 | ||
| Load capacitance stability | 1000 | pF | 7 | ||||
| Short-circuit current sourcing | ISC | 3 | mA | Continuous to VS / 2, CSO: SHE | 7 | ||
| Short-circuit current sourcing | ISC | 30 | mA | Continuous to VS / 2, CSO: TID | 7 | ||
| Short-circuit current sinking | ISC | -30 | mA | Continuous to VS / 2 | 7 | ||
| Quiescent current | IQ | 60 | 85 | µA | IO = 0A | 7 | |
| Supply voltage | VS | 2.2 | 36 | V | VS = (V+), (V-) | 4 | |
| Specified temperature | -40 | 85 | °C | 4 | |||
| Supply voltage, single supply | VS | 36 | V | Single supply, VS = (V+), 0V | 4 | ||
| Supply voltage, dual supply | VS | 18 | V | Dual supply, VS = (V+), (V-) | 4 | ||
| Signal input current | 5 | mA | 4 | ||||
| Operating temperature | TA | -40 | 125 | °C | 4 | ||
| Storage temperature | Tstg | -55 | 125 | °C | 4 | ||
| Lead temperature (soldering, 10s) | 300 | °C | Soldering, 10s | 4 | |||
| Junction-to-ambient thermal resistance | RθJA | 129.2 | ℃/W | D (SOIC) | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 69.1 | ℃/W | D (SOIC) | 5 | ||
| Junction-to-board thermal resistance | RθJB | 76.8 | ℃/W | D (SOIC) | 5 | ||
| Junction-to-top characterization parameter | ψJT | 16.1 | ℃/W | D (SOIC) | 5 | ||
| Junction-to-board characterization parameter | ψJB | 75.8 | ℃/W | D (SOIC) | 5 | ||
| Bandwidth, -3dB | BW | 100 | kHz | G = 5 | 7 | ||
| Bandwidth, -3dB | BW | 3.5 | kHz | G = 100 | 7 | ||
| Bandwidth, -3dB | BW | 0.9 | kHz | G = 500 | 7 | ||
| Slew rate rising | SR | 0.08 | V/µs | G = 5, VO = ±10V, CSO: SHE | 7 | ||
| Slew rate rising | SR | 0.125 | V/µs | G = 5, VO = ±10V, CSO: TID | 7 | ||
| Slew rate falling | SR | 0.12 | V/µs | G = 5, VO = ±10V | 7 | ||
| Overload recovery | 22 | µs | 50 % overdrive | 7 | |||
| Settling time 0.01% | tS | 350 | µs | G = 5 | 7 | ||
| Settling time 0.01% | tS | 450 | µs | G = 100 | 7 | ||
| Settling time 0.01% | tS | 1800 | µs | G = 500 | 7 | ||
| Voltage noise (RTI) | eNI | 110 | nV/√Hz | f = 10Hz | 6 | ||
| Voltage noise (RTI) | eNI | 100 | nV/√Hz | f = 100Hz | 6 | ||
| Voltage noise (RTI) | eNI | 60 | nV/√Hz | f = 1kHz | 6 | ||
| Voltage noise (RTI), peak-to-peak | eNI | 2.7 | µVPP | fB = 0.1Hz to 10Hz | 6 | ||
| Current noise (RTI) | iNI | 80 | fA/√Hz | f = 1kHz | 6 | ||
| Current noise (RTI), peak-to-peak | iNI | 5 | pAPP | fB = 0.1Hz to 10Hz | 6 |
CAD (KiCad official)
- Symbol:
INA122UA - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ina122ua-etched.step/ina122ua-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina122ua.step/ina122ua.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
3691b8c6247ada8d, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).