Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TL431CDRG4

Texas Instruments · Voltage Reference · SOIC-8

TL431CDRG4 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CATHODE bidirectional Shunt current/voltage input; the datasheet's recommended operating range is 1 mA to 100 mA cathode current with VKA up to 36 V.
2 ANODE power_in Common anode pin, normally connected to ground; the datasheet lists it as an output (O) in Table 5-1 and it is pinned with an asterisk note that it must be connected to ANODE or left open.
3 ANODE power_in Common anode pin, normally connected to ground; the datasheet lists it as an output (O) in Table 5-1 and it is pinned with an asterisk note that it must be connected to ANODE or left open.
4 NC unconnected No internal connection.
5 NC unconnected No internal connection.
6 ANODE power_in Common anode pin, normally connected to ground; the datasheet lists it as an output (O) in Table 5-1 and it is pinned with an asterisk note that it must be connected to ANODE or left open.
7 ANODE power_in Common anode pin, normally connected to ground; the datasheet lists it as an output (O) in Table 5-1 and it is pinned with an asterisk note that it must be connected to ANODE or left open.
8 REF input Threshold input relative to the common anode, regulated to Vref (about 2.5 V); it must not be left floating and needs IREF of at least 4 µA.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reference voltage Vref 2440 2495 2550 mV VKA = Vref, IKA = 10mA 6
Deviation of reference input voltage over full temperature range VI(dev) 4 25 mV VKA = Vref, IKA = 10mA; all other devices (not SOT23-3 / TL432) 6
Ratio of change in reference voltage to change in cathode voltage ΔVref/ΔVKA -1.4 -2.7 mV/V IKA = 10mA; ΔVKA = 10V - Vref 6
Ratio of change in reference voltage to change in cathode voltage ΔVref/ΔVKA -1 -2 mV/V IKA = 10mA; ΔVKA = 36V - 10V 6
Reference input current Iref 2 4 µA IKA = 10mA, R1 = 10kΩ, R2 = ∞ 6
Deviation of reference input current over full temperature range II(dev) 0.4 1.2 µA IKA = 10mA, R1 = 10kΩ, R2 = ∞ 6
Minimum cathode current for regulation Imin 0.4 1 mA VKA = Vref 6
Off-state cathode current Ioff 0.1 1 µA VKA = 36V, Vref = 0 6
Dynamic impedance /ZKA/ 0.2 0.5 Ω VKA = Vref, f ≤ 1kHz, IKA = 1mA to 100mA 6
Cathode voltage VKA 37 V All voltages with respect to ANODE 5
Continuous cathode current range IKA -100 150 mA 5
Reference input current II(ref) -0.05 10 mA 5
Operating junction temperature range TJ 150 °C 5
Storage temperature range Tstg -65 150 °C 5
Electrostatic discharge, human body model V(ESD) -2000 2000 V HBM, per ANSI/ESDA/JEDEC JS-001 (printed ±2000) 5
Electrostatic discharge, charged-device model V(ESD) -1000 1000 V CDM, per JEDEC JESD22-C101 (printed ±1000) 5
Cathode voltage VKA 36 V Minimum printed as Vref (symbol, not a number) 5
Continuous cathode current range IKA 1 100 mA 5
Operating free-air temperature, TL43xxC TA 0 70 °C TL43xxC grade (applies to TL431CDRG4) 5
Junction-to-ambient thermal resistance, D (SOIC-8) package RθJA 97 °C/W D package 5
Junction-to-case (top) thermal resistance, D (SOIC-8) package RθJC(top) 39 °C/W D package 5

CAD (KiCad official)

  • Symbol: TL431CDRG4
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tl431cdrg4-etched.step / tl431cdrg4-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tl431cdrg4.step / tl431cdrg4.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (85 pp, sha256 ed2e90697de4e2c5, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF