component
DAC60508ZRTER
Public Made by Adomby adom
Texas Instruments Digital To Analog Converters (DAC), WQFN-16-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownDAC60508ZRTER
Texas Instruments · Digital To Analog Converters (DAC) · WQFN-16-EP(3x3)
DAC60508ZRTER from Texas Instruments, in a WQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | bidirectional | Internal 2.5V precision reference output (default mode) or external reference input (1.25V to 5.5V input range per Recommended Operating Conditions). |
| 2 | OUT0 | output | Analog output voltage from DAC channel 0; output range 0V to VREF, 0V to 2×VREF, or 0V to ½×VREF configurable via BUFF-GAIN and REF-DIV bits. |
| 3 | OUT1 | output | Analog output voltage from DAC channel 1; output range 0V to VREF, 0V to 2×VREF, or 0V to ½×VREF configurable via BUFF-GAIN and REF-DIV bits. |
| 4 | OUT2 | output | Analog output voltage from DAC channel 2; output range 0V to VREF, 0V to 2×VREF, or 0V to ½×VREF configurable via BUFF-GAIN and REF-DIV bits. |
| 5 | OUT3 | output | Analog output voltage from DAC channel 3; output range 0V to VREF, 0V to 2×VREF, or 0V to ½×VREF configurable via BUFF-GAIN and REF-DIV bits. |
| 6 | GND | power_in | Ground reference point for all circuitry on the device. |
| 7 | VDD | power_in | Analog supply voltage 2.7V to 5.5V; bypass with 1-10µF and 0.1µF capacitors per Power Supply Recommendations section. |
| 8 | OUT4 | output | Analog output voltage from DAC channel 4; output range 0V to VREF, 0V to 2×VREF, or 0V to ½×VREF configurable via BUFF-GAIN and REF-DIV bits. |
| 9 | OUT5 | output | Analog output voltage from DAC channel 5; output range 0V to VREF, 0V to 2×VREF, or 0V to ½×VREF configurable via BUFF-GAIN and REF-DIV bits. |
| 10 | OUT6 | output | Analog output voltage from DAC channel 6; output range 0V to VREF, 0V to 2×VREF, or 0V to ½×VREF configurable via BUFF-GAIN and REF-DIV bits. |
| 11 | OUT7 | output | Analog output voltage from DAC channel 7; output range 0V to VREF, 0V to 2×VREF, or 0V to ½×VREF configurable via BUFF-GAIN and REF-DIV bits. |
| 12 | CS | input | Active-low chip select; enables serial interface input shift register when CS driven low for 24-bit or 32-bit (with CRC enabled) data transfer. |
| 13 | SCLK | input | Serial interface clock input; data clocked into shift register on falling edge of SCLK; maximum frequency 50MHz. |
| 14 | SDI | input | Serial interface data input; MSB-first data clocked into input shift register on each falling edge of SCLK. |
| 15 | SDO/ALARM | output | Serial interface data output (default, high-impedance when CS high) or configurable as open-drain alarm output for CRC or reference error indication (requires 10kΩ pull-up to VIO). |
| 16 | VIO | power_in | I/O supply voltage 1.7V to 5.5V; sets serial interface logic levels and requires 0.1µF bypass capacitor. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-16-EP(3x3) |
| Category | Data Acquisition |
| Pins | 17 |
CAD (KiCad official)
- Symbol:
DAC60508ZRTER - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: WQFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
dac60508zrter-etched.step/dac60508zrter-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dac60508zrter.step/dac60508zrter.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (59 pp, sha256
0cc679c7f01fd2b7, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).