3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC18F67K90-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)
PIC18F67K90-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE1/LCDBIAS2/P2C | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are LCD BIAS2 input and ECCP2 PWM Output C. |
| 2 | RE0/LCDBIAS1/P2D | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are LCD BIAS1 input and ECCP2 PWM Output D. |
| 3 | RG0/ECCP3/P3A | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are Capture 3 input, Compare 3 output, PWM3 output and ECCP3 PWM Output A. |
| 4 | RG1/TX2/CK2/AN19/C3OUT | bidirectional | Digital I/O; alternate functions are EUSART2 asynchronous transmit or synchronous clock, Analog Input 19 and Comparator 3 output. |
| 5 | RG2/RX2/DT2/AN18/C3INA | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are EUSART2 receive or synchronous data, Analog Input 18 and Comparator 3 Input A. |
| 6 | RG3/CCP4/AN17/P3D/C3INB | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are CCP4 capture/compare/PWM, Analog Input 17, ECCP3 PWM Output D and Comparator 3 Input B. |
| 7 | MCLR/RG5 | input | Master Clear input (programming voltage input) that is an active-low Reset to the device; when MCLR is disabled this pin is a general purpose input-only pin. |
| 8 | RG4/SEG26/RTCC/T7CKI/T5G/CCP5/AN16/P1D/C3INC | bidirectional | Digital I/O; alternate functions are LCD Segment 26 output, RTCC output, Timer7 clock input, Timer5 gate input, CCP5, Analog Input 16, ECCP1 PWM Output D and Comparator 3 Input C. |
| 9 | VSS | power_in | Ground reference for logic and I/O pins. |
| 10 | VDDCORE/VCAP | power_in | Core logic power or external filter capacitor connection; when the regulator is enabled a low-ESR capacitor of 10 uF is required on this pin. |
| 11 | RF7/AN5/SS1/SEG25 | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are Analog Input 5, SPI1 slave select input and LCD Segment 25 output. |
| 12 | RF6/AN11/SEG24/C1INA | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are Analog Input 11, LCD Segment 24 output and Comparator 1 Input A. |
| 13 | RF5/AN10/CVREF/SEG23/C1INB | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are Analog Input 10, comparator reference voltage output, LCD Segment 23 output and Comparator 1 Input B. |
| 14 | RF4/AN9/SEG22/C2INA | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are Analog Input 9, LCD Segment 22 output and Comparator 2 Input A. |
| 15 | RF3/AN8/SEG21/C2INB/CTMUI | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are Analog Input 8, LCD Segment 21 output, Comparator 2 Input B and CTMU pulse generator charger output. |
| 16 | RF2/AN7/C1OUT/SEG20 | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are Analog Input 7, Comparator 1 output and LCD Segment 20 output. |
| 17 | RF1/AN6/C2OUT/SEG19/CTDIN | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are Analog Input 6, Comparator 2 output, LCD Segment 19 output and CTMU pulse delay input. |
| 18 | ENVREG | input | Enable input for the on-chip voltage regulator, which must be tied to VDD to enable it or to ground to disable it. |
| 19 | AVDD | power_in | Positive supply for analog modules. |
| 20 | AVSS | power_in | Ground reference for analog modules. |
| 21 | RA3/AN3/VREF+ | bidirectional | Digital I/O; alternate functions are Analog Input 3 and A/D reference voltage (high) input. |
| 22 | RA2/AN2/VREF- | bidirectional | Digital I/O; alternate functions are Analog Input 2 and A/D reference voltage (low) input. |
| 23 | RA1/AN1/SEG18 | bidirectional | Digital I/O; alternate functions are Analog Input 1 and LCD Segment 18 output. |
| 24 | RA0/AN0/ULPWU | bidirectional | Digital I/O; alternate functions are Analog Input 0 and Ultra Low-Power Wake-up input. |
| 25 | VSS | power_in | Ground reference for logic and I/O pins. |
| 26 | VDD | power_in | Positive supply for logic and I/O pins. |
| 27 | RA5/AN4/SEG15/T1CKI/T3G/HLVDIN | bidirectional | Digital I/O; alternate functions are Analog Input 4, LCD Segment 15 output, Timer1 clock input, Timer3 gate input and High/Low-Voltage Detect input. |
| 28 | RA4/T0CKI/SEG14 | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are Timer0 external clock input and LCD Segment 14 output. |
| 29 | RC1/SOSCI/ECCP2/P2A/SEG32 | bidirectional | Digital I/O; alternate functions are SOSC oscillator input, ECCP2 capture/compare/PWM, ECCP2 PWM Output A and LCD Segment 32 output. |
| 30 | RC0/SOSCO/SCLKI | bidirectional | Digital I/O; alternate functions are SOSC oscillator output and digital SOSC clock input. |
| 31 | RC6/TX1/CK1/SEG27 | bidirectional | Digital I/O; alternate functions are EUSART1 asynchronous transmit or synchronous clock and LCD Segment 27 output. |
| 32 | RC7/RX1/DT1/SEG28 | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are EUSART1 asynchronous receive or synchronous data and LCD Segment 28 output. |
| 33 | RC2/ECCP1/P1A/SEG13 | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are ECCP1 capture/compare/PWM output, ECCP1 PWM Output A and LCD Segment 13 output. |
| 34 | RC3/SCK1/SCL1/SEG17 | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are MSSP1 SPI clock or I2C clock and LCD Segment 17 output. |
| 35 | RC4/SDI1/SDA1/SEG16 | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are MSSP1 SPI data input, I2C data I/O and LCD Segment 16 output. |
| 36 | RC5/SDO1/SEG12 | bidirectional | Digital I/O; alternate functions are MSSP1 SPI data output and LCD Segment 12 output. |
| 37 | RB7/KBI3/PGD | bidirectional | Digital I/O with interrupt-on-change; alternate function is the in-circuit debugger and ICSP programming data pin. |
| 38 | VDD | power_in | Positive supply for logic and I/O pins. |
| 39 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock input; when an internal oscillator mode is selected this pin is available as general purpose I/O RA7. |
| 40 | OSC2/CLKO/RA6 | output | Oscillator crystal output or clock output (FOSC/4 in certain modes); when an internal oscillator mode is selected this pin is available as general purpose I/O RA6. |
| 41 | VSS | power_in | Ground reference for logic and I/O pins. |
| 42 | RB6/KBI2/PGC | bidirectional | Digital I/O with interrupt-on-change; alternate function is the in-circuit debugger and ICSP programming clock pin. |
| 43 | RB5/KBI1/SEG29/T3CKI/T1G | bidirectional | Digital I/O with interrupt-on-change; alternate functions are LCD Segment 29 output, Timer3 clock input and Timer1 external clock gate input. |
| 44 | RB4/KBI0/SEG11 | bidirectional | Digital I/O with interrupt-on-change; alternate function is LCD Segment 11 output. |
| 45 | RB3/INT3/SEG10/CTED2/ECCP2/P2A | bidirectional | Digital I/O; alternate functions are external interrupt 3, LCD Segment 10 output, CTMU Edge 2 input, ECCP2 capture/compare/PWM and ECCP2 PWM Output A. |
| 46 | RB2/INT2/SEG9/CTED1 | bidirectional | Digital I/O; alternate functions are external interrupt 2, LCD Segment 9 output and CTMU Edge 1 input. |
| 47 | RB1/INT1/SEG8 | bidirectional | Digital I/O; alternate functions are external interrupt 1 and LCD Segment 8 output. |
| 48 | RB0/INT0/SEG30/FLTO | bidirectional | Digital I/O; alternate functions are external interrupt 0, LCD Segment 30 output and Enhanced PWM Fault input for ECCP1/2/3. |
| 49 | RD7/SEG7/SS2 | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are LCD Segment 7 output and MSSP2 SPI slave select input. |
| 50 | RD6/SEG6/SCK2/SCL2 | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are LCD Segment 6 output, MSSP2 SPI clock and I2C clock. |
| 51 | RD5/SEG5/SDI2/SDA2 | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are LCD Segment 5 output, MSSP2 SPI data input and I2C data I/O. |
| 52 | RD4/SEG4/SDO2 | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are LCD Segment 4 output and MSSP2 SPI data output. |
| 53 | RD3/SEG3 | bidirectional | Digital I/O with Schmitt Trigger input; alternate function is LCD Segment 3 output. |
| 54 | RD2/SEG2 | bidirectional | Digital I/O with Schmitt Trigger input; alternate function is LCD Segment 2 output. |
| 55 | RD1/SEG1/T5CKI/T7G | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are LCD Segment 1 output, Timer5 clock input and Timer7 gate input. |
| 56 | VSS | power_in | Ground reference for logic and I/O pins. |
| 57 | VDD | power_in | Positive supply for logic and I/O pins. |
| 58 | RD0/SEG0/CTPLS | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are LCD Segment 0 output and CTMU pulse generator output. |
| 59 | RE7/ECCP2/SEG31/P2A | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are ECCP2 capture/compare/PWM (alternate pin), LCD Segment 31 output and ECCP2 PWM Output A. |
| 60 | RE6/COM3/P1B/CCP6 | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are LCD Common 3 output, ECCP1 PWM Output B and Capture 6 input/Compare 6 output/PWM6 output. |
| 61 | RE5/COM2/P1C/CCP7 | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are LCD Common 2 output, ECCP1 PWM Output C and Capture 7 input/Compare 7 output/PWM7 output. |
| 62 | RE4/COM1/P3B/CCP8 | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are LCD Common 1 output, ECCP3 PWM Output B and Capture 8 input/Compare 8 output/PWM8 output. |
| 63 | RE3/COM0/P3C/CCP9/REFO | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are LCD Common 0 output, ECCP3 PWM Output C, Capture 9 input/Compare 9 output/PWM9 output and reference clock output. |
| 64 | RE2/LCDBIAS3/P2B/CCP10 | bidirectional | Digital I/O with Schmitt Trigger input; alternate functions are LCD BIAS3 input, ECCP2 PWM Output B and Capture 10 input/Compare 10 output/PWM10 output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
CAD (KiCad official)
- Symbol:
PIC18F67K90-I - Footprint:
Package_QFP:TQFP-64_10x10mm_P0.5mm - 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic18f67k90-i-etched.step/pic18f67k90-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f67k90-i.step/pic18f67k90-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (570 pp, sha256
fcd95dc4fd3f723d, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).