Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TM6108

TM(Shenzhen Titan Micro Elec) · Touch Sensors · SOP-16

TM6108 from TM(Shenzhen Titan Micro Elec), in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Key1 input Touch key input 1; must be tied to ground if unused.
2 Key2 input Touch key input 2; must be tied to ground if unused.
3 Key3 input Touch key input 3; must be tied to ground if unused.
4 Key4 input Touch key input 4; must be tied to ground if unused.
5 Key5 input Touch key input 5; must be tied to ground if unused.
6 Key6 input Touch key input 6; must be tied to ground if unused.
7 Key7 input Touch key input 7; must be tied to ground if unused.
8 Key8 input Touch key input 8; must be tied to ground if unused.
9 GND power_in Logic power supply negative (ground).
10 VDD power_in Logic power supply positive, 2.2V to 5.5V operating range.
11 LSC input Power-saving mode select: floating = normal mode, grounded = ultra-low power (wake-up time increases 0.5 to 1 s).
12 OMS input Output mode select: floating = 2-wire serial output, grounded = 4-wire binary parallel output.
13 BIN0 output Binary parallel output bit 0 (CMOS output, source current -2 mA min at VDD=3V, -5 mA min at VDD=5V).
14 BIN1 output Binary parallel output bit 1 (CMOS output, source current -2 mA min at VDD=3V, -5 mA min at VDD=5V).
15 BIN2/Clock bidirectional Binary parallel output bit 2 in parallel mode; serial clock input with built-in pull-up when OMS is floating.
16 BIN3/Data output Binary parallel output bit 3 in parallel mode; serial data NMOS output with built-in pull-up in serial mode (sink 4 mA min at VDD=3V, 10 mA min at VDD=5V).

Key specifications

Parameter Value
Manufacturer TM(Shenzhen Titan Micro Elec)
Package SOP-16
Category Sensors
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Clock input high voltage VIH 3.5 5 V VDD=5V 2
Clock input low voltage VIL 0 1.5 V VDD=5V 2
Kout/Data sink current (NMOS) IOL 4 8 mA VDD=3V/VOL=0.1VDD 2
Kout/Data sink current (NMOS) IOL 10 20 mA VDD=5V/VOL=0.1VDD 2
BIN0~BIN3 source current (CMOS) IOH -2 -4 mA VDD=3V/VOH=0.9VDD 2
BIN0~BIN3 source current (CMOS) IOH -5 -10 mA VDD=5V/VOH=0.9VDD 2
Clock/Kout pull-up resistance RPH 20 60 100 kΩ VDD=3V 3
Clock/Kout pull-up resistance RPH 10 30 50 kΩ VDD=5V 3
Operating current IDD 1.2 1.8 mA VDD=3V 3
Operating current IDD 2.2 3.3 mA VDD=5V 3
Key response time - normal mode tKRT 100 125 150 ms 3
Key response time - standby mode tKRT 100 150 250 ms 3
Maximum key hold time tKH 60 64 68 s 3
Normal to standby mode time tNS 7 8 9 s 3
Clock low time TLOW 20 us 3
Clock high time THIGH 20 us 3
Data transfer rate TBR 25 Kbps 3
Retry interval after data read error TED 6 ms 3
Supply voltage VDD -0.3 6.5 V 2
Input voltage range VIN -0.3 V max is VDD+0.3 V 2
Operating temperature range Topr -40 85 ℃ 2
Storage temperature range tstg -50 125 ℃ 2
Total power dissipation 500 mW 2
Supply voltage VDD 2.2 5.5 V Ta=+25℃ 2
Operating temperature Ta -40 85 ℃ 2
Operating junction temperature Tj -50 125 ℃ 2
Standby current, LSC=GND ISTB 6 uA VDD=3V, LSC=GND 3
Standby current, LSC=GND ISTB 12 uA VDD=5V, LSC=GND 3
Standby current, LSC=Open ISTB 12 uA VDD=3V, LSC=Open 3
Standby current, LSC=Open ISTB 25 uA VDD=5V, LSC=Open 3

CAD (KiCad official)

  • Symbol: TM6108
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOP-16 (KiCad packages3D, STEP)
  • 3D model files: tm6108-etched.step / tm6108-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tm6108.step / tm6108.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TM(Shenzhen Titan Micro Elec) datasheet (7 pp, sha256 7ad4ddaeb37dcdcc, retrieved 2026-10-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF