Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MD57E10QC3

Shanghai Mingda Microelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L

MD57E10QC3 from Shanghai Mingda Microelectronics, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Unregulated input supply. Operating range 2.2 V to 5.5 V (absolute max -0.3 V to 6.0 V). Bypass with a 1.0 uF or larger ceramic capacitor to GND placed close to the pin.
2 GND power_in Device ground / return for input and output capacitors and internal reference. Connect to the system ground plane with a low-impedance path.
3 EN input Enable input. Drive above VENH (min 0.85 V, max 5.5 V) to enable the regulator; drive below VENL (max 0.35 V) to disable and activate the 240 ohm typical automatic output discharge. Internally pulled low through a 1 Mohm resistor to GND. Input current +/-0.1 uA at VIN = 5.5 V. Do not leave floating in noisy environments.
4 NC unconnected No internal connection. Leave floating or tie to GND for mechanical/thermal purposes; do not use as a routing node.
5 VOUT power_out Regulated LDO output. Fixed 1.0 V (QC3 = SOT-23-5L, 10 = 1.0 V output option) at up to 300 mA with +/-2% tolerance. Requires a 1.0 uF (1 uF to 10 uF) ceramic output capacitor with ESR 5 mohm to 500 mohm; the output capacitor may be placed up to 10 cm from the pin.

Key specifications

Parameter Value
Manufacturer Shanghai Mingda Microelectronics
Package SOT-23-5L
Category PMIC
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • MD57E10QC3
  • MD57E10QC3QA3
  • MD57E10QC3WB6

CAD (KiCad official)

  • Symbol: MD57E10QC3
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5L (KiCad packages3D, STEP)
  • 3D model files: md57e10qc3-etched.step / md57e10qc3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); md57e10qc3.step / md57e10qc3.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Shanghai Mingda Microelectronics datasheet (13 pp, sha256 da256fddd9468a88, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF