DIO2511CS16 from DIOO, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	VCC	power_in	Video filter driver power supply, recommended 3.135 V to 5.5 V (absolute maximum 0 to 6.0 V).
2	VIN	power_in	Video filter driver input, accepts DC-coupled DAC or AC-coupled signal with internal clamp, range GND to 1.4 VPP.
3	+INR	input	Right channel positive (non-inverting) audio input.
4	-INR	input	Right channel negative (inverting) audio input, used with RIN/RFB gain-setting resistors.
5	OUTR	output	Right channel audio line output, drives loads down to 600 Ω and up to 220 pF capacitive load.
6	EN	input	Mute input, active-low, with VIH 60% of VDD and VIL 40% of VDD.
7	VSS	power_out	Negative supply voltage generated by the internal charge pump, requires a capacitor of at least the flying capacitor value (typically 1 µF).
8	CN	passive	Charge-pump flying capacitor negative terminal, typically 1 µF.
9	CP	passive	Charge-pump flying capacitor positive terminal, typically 1 µF.
10	VDD	power_in	Audio line driver positive supply, recommended 3 V to 3.6 V (absolute maximum -0.3 to 4 V).
11	GND	power_in	Ground.
12	OUTL	output	Left channel audio line output, drives loads down to 600 Ω and up to 220 pF capacitive load.
13	-INL	input	Left channel negative (inverting) audio input, used with RIN/RFB gain-setting resistors.
14	+INL	input	Left channel positive (non-inverting) audio input.
15	VOUT	output	Video filter driver output with 6 dB gain, drives single 150 Ω or dual 75 Ω loads.
16	GND	power_in	Ground.

Key specifications

Parameter	Value
Manufacturer	DIOO
Package	SOIC-16
Category	Amplifiers
Pins	16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Supply Voltage	VDD	3	3.3	3.6	V		4
Supply Voltage	VCC	3.135		5.5	V		4
EN High level Input Voltage	VIH	60			% of VDD		4
EN Low level Input Voltage	VIL			40	% of VDD		4
Operating Temperature Range	TA	-40		85	°C		4
Supply Voltage/VCC	VCC	0		6	V		3
Supply Voltage/VDD	VDD	-0.3		4	V		3
Input Voltage/VIN	VIN	-0.3			V		3
Minimum load impedance		600			Ω		3
EN to GND		-0.3			V		3
Storage Temperature Range		-65		150	°C		3
Junction Temperature				150	°C		3
Lead Temperature Range				260	°C		3
HBM ESD, output pins		8			kV	JEDEC JESD22-A114	3
HBM ESD, all pins		5			kV	JEDEC JESD22-A114	3
Output Offset Voltage	VOS			0.9	mV	VDD=3.3V, Input grounded, Unity gain	4
Power supply rejection ratio	PSRR	90			dB	VDD=3.3V	4
High level output voltage	VOH	3.1			V	VDD=3.3V, RL=10kΩ	4
Low level output voltage	VOL			-3.05	V	VDD=3.3V, RL=10kΩ	4
EN High level input current	IIH			1	µA	VDD=3.3V, VI=VDD	4
EN Low level input current	IIL			1	µA	VDD=3.3V, VI=0V	4
Supply current	IDD			14	mA	VDD=3.3V, VI= VDD, No load	4
Supply current (mute mode)	IDD			0.8	mA	Mute mode, VDD=3.3V	4
Output Voltage	VO	2	2.3		VRMS	THD=1%, VDD=3.3V, f=1kHz	4
Total harmonic distortion + noise	THD+N			0.0005	%	VO=2VRMS, f=1kHz	4
Channel crosstalk	XTALK			-105	dB	VO=2VRMS, f=1kHz	4
Signal noise ratio	SNR	95		105	dB	VO=2VRMS,BW=22kHz, A-weighted	4
Maximum capacitive load	CL			220	pF		4
Noise output voltage	VN			10	µVRMS	BW=20Hz to 22kHz	4
Supply Current	ICC		8	12	mA		5
Video Input Voltage Range	VIN			1.4	VPP		5
Power Supply Rejection	PSRR			-50	dB		5
Channel Gain	AV	5.8	6	6.2	dB		5
-1dB Bandwidth	f1dB	8	10.5		MHz		5
-3dB Bandwidth	f3dB	9	11.8		MHz		5
Filter Response				-40	dB	f=27MHz	5
Differential Gain	DG			0.2	%		5
Differential Phase	DP			0.36	°		5
Output Distortion	THD			0.38	%	f=1MHz	5
Crosstalk	XTALK			-74	dB	f=1MHz	5
Signal to Noise Ratio	SNR	70			dB		5
Group Delay				20	ns	f=400kHz, 6.5MHz	5
Chroma Luma Gain	CLG_SD	95	100	105	%	f=3.58MHz ref to SD in at 400kHz	5
Chroma Luma Delay	CLD_SD			5.5	ns	f=3.58MHz ref to SD in at 400kHz	5

CAD (KiCad official)

Symbol: DIO2511CS16
Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
3D model: SOIC-16 (KiCad packages3D, STEP)
3D model files: dio2511cs16-etched.step / dio2511cs16-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); dio2511cs16.step / dio2511cs16.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: DIOO datasheet (12 pp, sha256 5f0712eac57c3877, retrieved 2026-10-31, tier: lcsc)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

DIO2511CS16

Verified DIO2511CS16

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README