component
TP2332-SR
Public Made by Adomby adom
3PEAK Precision Op Amps, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTP2332-SR
3PEAK · Precision Op Amps · SOP-8
TP2332-SR from 3PEAK, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out A | output | Output of amplifier A; the output voltage range extends to within a mV value of each supply rail (the numeric value is missing from the extracted text). |
| 2 | -In A | input | Inverting input of amplifier A; if the input extends more than 500mV beyond the power supply, the input current must be limited to less than 10mA. |
| 3 | +In A | input | Non-inverting input of amplifier A; if the input extends more than 500mV beyond the power supply, the input current must be limited to less than 10mA. |
| 4 | -Vs | power_in | Negative power supply, normally tied to ground; the V+ to V- difference must be 2.2V to 5.5V, and a 0.1μF bypass capacitor is recommended if it is not tied to ground. |
| 5 | +In B | input | Non-inverting input of amplifier B; if the input extends more than 500mV beyond the power supply, the input current must be limited to less than 10mA. |
| 6 | -In B | input | Inverting input of amplifier B; if the input extends more than 500mV beyond the power supply, the input current must be limited to less than 10mA. |
| 7 | Out B | output | Output of amplifier B; the output voltage range extends to within a mV value of each supply rail (the numeric value is missing from the extracted text). |
| 8 | +Vs | power_in | Positive power supply, typically 2.2V to 5.5V (absolute maximum supply voltage 7.0V); bypass with a 0.1μF capacitor as close to the part as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | 3PEAK |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -100 | 2 | 100 | μV | VCM = VDD/2, VDD= 5V | 3 |
| Common Mode Rejection Ratio | CMRR | 85 | 110 | dB | VCM = 2V to 3V | 3 | |
| Common-mode Input Voltage Range | VCM | -0.1 | 0.1 | V | Printed as V- -0.1 V to V+ +0.1 V (min referenced to V-, max referenced to V+) | 3 | |
| Power Supply Rejection Ratio | PSRR | 75 | 100 | dB | VCM = 2.5V, VS = 4.8V to 5V | 3 | |
| Open-Loop Large Signal Gain | AVOL | 100 | 130 | dB | RLOAD = 2kΩ | 3 | |
| Output Swing from Supply Rail | VOL, VOH | 15 | 45 | mV | RLOAD = 2kΩ | 3 | |
| Output Short-Circuit Current | ISC | 95 | 130 | mA | Sink or source current | 3 | |
| Supply Voltage | VDD | 2.2 | 5.5 | V | 3 | ||
| Quiescent Current per Amplifier | IQ | 190 | 280 | μA | 3 | ||
| Slew Rate | SR | 0.36 | 0.84 | V/μs | AV = 1, VOUT = 1.5V to 3.5V, CLOAD = 60pF, RLOAD = 1kΩ | 3 | |
| Supply Voltage (V+, V-) | V+, V- | 7 | V | Note 2: supplies established simultaneously with, or before, input signals | 2 | ||
| Input Voltage | VIN | -0.3 | 0.3 | V | Printed as V-, 0.3 to V+ + 0.3 (min referenced to V-, max referenced to V+) | 2 | |
| Input Current, +IN, -IN | IIN | -20 | 20 | mA | Note 3 | 2 | |
| Output Current, OUT | IOUT | -160 | 160 | mA | 2 | ||
| Current at Supply Pins | -60 | 60 | mA | 2 | |||
| Operating Temperature Range | -40 | 125 | °C | 2 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 2 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Lead Temperature (Soldering) | 260 | °C | Soldering, 10 sec | 2 | |||
| Human Body Model ESD | HBM | 4 | kV | ANSI/ESDA/JEDEC JS-001, minimum level | 2 | ||
| Charged Device Model ESD | CDM | 1 | kV | ANSI/ESDA/JEDEC JS-002, minimum level | 2 | ||
| Thermal Resistance, Junction-to-Ambient, 8-Pin SOP | θJA | 158 | °C/W | 8-Pin SOP; Note 4: values for short traces connected to the leads | 2 | ||
| Thermal Resistance, Junction-to-Case, 8-Pin SOP | θJC | 43 | °C/W | 8-Pin SOP | 2 |
CAD (KiCad official)
- Symbol:
TP2332-SR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
tp2332-sr-etched.step/tp2332-sr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tp2332-sr.step/tp2332-sr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: 3PEAK datasheet (17 pp, sha256
4a01d80bb34e05a6, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).