component
BCT2020EUK28-TR
Public Made by Adomby adom
BROADCHIP Linear Voltage Regulators (LDO), SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownBCT2020EUK28-TR
BROADCHIP · Linear Voltage Regulators (LDO) · SOT-23-5
BCT2020EUK28-TR from BROADCHIP, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Regulator input; supply voltage can range from 1.6V to 5.5V, and it should be bypassed with a 1μF capacitor to GND. |
| 2 | GND | power_in | Ground. |
| 3 | EN | input | Enable pin with an internal pull-down resistor; a logic low reduces the supply current to less than 1μA, and it should be connected to IN for normal operation. |
| 4 | BP | passive | Reference-noise bypass pin (fixed-voltage version only); bypass with a low-leakage 0.01μF ceramic capacitor placed very close to the pin for reduced output noise and high PSRR. |
| 5 | OUT | power_out | Regulator output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | BROADCHIP |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 1.6 | 5.5 | V | +25℃ | 5 | |
| Output Voltage Accuracy | -2.5 | 2.5 | % | IOUT = 0.1mA, +25℃ | 5 | ||
| Line Regulation (1.8V ≤ VOUT ≤ 3.3V) | 0.01 | 0.06 | %/V | VIN = 1.6V or (VOUT + 0.5V) to 5.5V, IOUT = 1mA, 1.8V ≤ VOUT ≤ 3.3V, +25℃ | 5 | ||
| Load Regulation | ΔVOUT | 12 | 40 | mV | IOUT = 0.1mA to 300mA, +25℃ | 5 | |
| Dropout Voltage (2.5V ≤ VOUT < 3.0V) | VDROP | 215 | 280 | mV | IOUT = 300mA, 2.5V ≤ VOUT < 3.0V, +25℃ | 5 | |
| Supply Pin Current | IQ | 20 | 26 | µA | No Load, VEN = VIN, +25℃ | 5 | |
| Maximum Output Current | 300 | mA | +25℃ (see note 1: affected by PCB layout and ambient temperature) | 5 | |||
| Current Limit | ILIM | 360 | 560 | mA | +25℃ | 5 | |
| EN Input Threshold HIGH | VIH | 1.5 | V | VIN = 1.6V to 5.5V, Full (-40℃ to +85℃) | 6 | ||
| EN Input Threshold LOW | VIL | 0.4 | V | Full (-40℃ to +85℃) | 6 | ||
| EN Input Bias Current HIGH | IBH | 0.8 | 2 | µA | VEN = 5.5V, Full (-40℃ to +85℃) | 6 | |
| EN Input Bias Current LOW | IBL | 0.01 | 1 | µA | VEN = 0V, Full (-40℃ to +85℃) | 6 | |
| Shutdown Supply Current | ISHDN | 0.01 | 1 | µA | VEN = 0V, Full (-40℃ to +85℃) | 6 | |
| Output Voltage Temperature Coefficient | 30 | ppm/℃ | IOUT = 0.1mA, Full (-40℃ to +85℃); worst case per note 3 | 5 | |||
| Absolute Max: IN to GND | -0.3 | 6 | V | 3 | |||
| Absolute Max: EN to GND | -0.3 | 6 | V | 3 | |||
| Absolute Max: OUT, BP to GND | -0.3 | V | Maximum printed as (VIN + 0.3V) | 3 | |||
| Junction Temperature | 150 | ℃ | 3 | ||||
| Storage Temperature Range | -65 | 150 | ℃ | 3 | |||
| Operating Voltage Range | 1.6 | 5.5 | V | 3 | |||
| Operating Temperature Range | -40 | 85 | ℃ | 3 | |||
| Short Current Limit | ISHORT | 200 | mA | VOUT = 0V, +25℃ | 5 | ||
| PSRR (CBP = 0µF), f = 217Hz | PSRR | 80 | dB | CBP = 0µF, IOUT = 30mA, COUT = 1μF, VIN = VOUT + 1V, ΔVRIPPLE = 0.2VP-P, f = 217Hz, +25℃ | 5 | ||
| PSRR (CBP = 0µF), f = 1kHz | PSRR | 70 | dB | CBP = 0µF, IOUT = 30mA, COUT = 1μF, VIN = VOUT + 1V, ΔVRIPPLE = 0.2VP-P, f = 1kHz, +25℃ | 5 | ||
| PSRR (CBP = 0.01µF), f = 217Hz | PSRR | 82 | dB | CBP = 0.01μF, IOUT = 30mA, COUT = 1μF, VIN = VOUT + 1V, ΔVRIPPLE = 0.2VP-P, f = 217Hz, +25℃ | 5 | ||
| PSRR (CBP = 0.01µF), f = 1kHz | PSRR | 70 | dB | CBP = 0.01μF, IOUT = 30mA, COUT = 1μF, VIN = VOUT + 1V, ΔVRIPPLE = 0.2VP-P, f = 1kHz, +25℃ | 5 | ||
| Output Voltage Noise (CBP = 0µF), IOUT = 0mA | en | 100 | µVRMS | CBP = 0µF, f = 10Hz to 100kHz, COUT = 1µF, VOUT = 1.8V, IOUT = 0mA, +25℃ | 5 | ||
| Output Voltage Noise (CBP = 0µF), IOUT = 30mA | en | 200 | µVRMS | CBP = 0µF, f = 10Hz to 100kHz, COUT = 1µF, VOUT = 1.8V, IOUT = 30mA, +25℃ | 5 | ||
| Output Voltage Noise (CBP = 0.01µF), IOUT = 0mA | en | 30 | µVRMS | CBP = 0.01µF, f = 10Hz to 100kHz, COUT = 1µF, VOUT = 1.8V, IOUT = 0mA, +25℃ | 5 | ||
| Output Voltage Noise (CBP = 0.01µF), IOUT = 30mA | en | 75 | µVRMS | CBP = 0.01µF, f = 10Hz to 100kHz, COUT = 1µF, VOUT = 1.8V, IOUT = 30mA, +25℃ | 5 | ||
| Start-Up Time | tSTR | 30 | µs | COUT = 1μF, No Load, CBP = 0µF, +25℃ | 6 | ||
| RON of Discharge MOSFET | 50 | Ω | VIN = 4.0V, VEN = 0V, +25℃ | 6 | |||
| Thermal Shutdown Temperature | TSHDN | 140 | ℃ | 6 | |||
| Thermal Shutdown Hysteresis | ΔTSHDN | 15 | ℃ | 6 |
CAD (KiCad official)
- Symbol:
BCT2020EUK28-TR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
bct2020euk28-tr-etched.step/bct2020euk28-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);bct2020euk28-tr.step/bct2020euk28-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: BROADCHIP datasheet (9 pp, sha256
909ffdb4edbd14fe, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).