Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SGM4890YMS

SGMICRO · Audio Amplifiers · MSOP-8

SGM4890YMS from SGMICRO, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SHDN input Active-low shutdown control input. Drive below V_SDIL (max 0.4V) to enter low-power shutdown (I_SD = 0.01µA typ). Drive above V_SDIH (min 1.2V) to enable the amplifier.
2 Bypass passive Mid-supply bypass node. Connect an external bypass capacitor (C_BYPASS, typ 1µF) from this pin to GND to filter the internal mid-supply reference and set the turn-on/wake-up time (T_WU ≈ 100-110ms with 1µF).
3 +IN input Non-inverting audio input to the internal amplifier. Used in conjunction with -IN and external resistors to set the closed-loop gain of the BTL amplifier.
4 -IN input Inverting audio input. External input and feedback resistors on this pin set the amplifier gain.
5 VO1 output BTL speaker output 1 (one side of the bridge-tied-load speaker driver). Drives the load together with VO2; no output coupling capacitor is required.
6 V+ power_in Positive power supply input. Operating range 2.5V to 5.5V (absolute max 6V). Bypass locally to GND with a low-ESR ceramic capacitor.
7 GND power_in Device ground return. Connect to the system analog/power ground plane.
8 VO2 output BTL speaker output 2 (opposite side of the bridge-tied-load speaker driver). Drives the load together with VO1 to deliver up to 1.1W into 8Ω at 5V.

Key specifications

Parameter Value
Manufacturer SGMICRO
Package MSOP-8
Category Amplifiers/Comparators
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • SGM4890YMS/TR

CAD (KiCad official)

  • Symbol: SGM4890YMS
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: sgm4890yms-etched.step / sgm4890yms-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sgm4890yms.step / sgm4890yms.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SGMICRO datasheet (12 pp, sha256 041fa53133f2f2af, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF