3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM2902MX
Texas Instruments · Operational Amplifier · SOIC-14-150mil
LM2902MX from Texas Instruments, in a SOIC-14-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTPUT1 | output | Output of channel 1 op amp. |
| 2 | INPUT1- | input | Inverting input of channel 1 op amp. |
| 3 | INPUT1+ | input | Noninverting input of channel 1 op amp. |
| 4 | V+ | power_in | Positive supply voltage terminal. |
| 5 | INPUT2+ | input | Noninverting input of channel 2 op amp. |
| 6 | INPUT2- | input | Inverting input of channel 2 op amp. |
| 7 | OUTPUT2 | output | Output of channel 2 op amp. |
| 8 | OUTPUT3 | output | Output of channel 3 op amp. |
| 9 | INPUT3- | input | Inverting input of channel 3 op amp. |
| 10 | INPUT3+ | input | Noninverting input of channel 3 op amp. |
| 11 | GND | power_in | Ground or negative supply voltage terminal. |
| 12 | INPUT4+ | input | Noninverting input of channel 4 op amp. |
| 13 | INPUT4- | input | Inverting input of channel 4 op amp. |
| 14 | OUTPUT4 | output | Output of channel 4 op amp. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-14-150mil |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (V+ − V−) | V+ − V− | 3 | 26 | V | LM2902-N | 4 | |
| Operating Junction Temperature | TJ | -40 | 85 | °C | LM2902-N | 4 | |
| Operating Input Voltage on Input pins | 0 | V | 4 | ||||
| Supply Voltage | V+ | 26 | V | LM2902-N | 4 | ||
| Differential Input Voltage | 26 | V | LM2902-N | 4 | |||
| Input Voltage | -0.3 | 26 | V | LM2902-N | 4 | ||
| Input Current | 50 | mA | VIN < −0.3 V | 4 | |||
| Power Dissipation (SOIC package) | 800 | mW | SOIC package | 4 | |||
| Storage Temperature | Tstg | -65 | 150 | °C | 4 | ||
| Lead Temperature (Soldering) | 260 | °C | Soldering, 10 seconds | 4 | |||
| Soldering Information (SOIC vapor phase) | 215 | °C | Vapor phase (60 seconds), small outline package | 4 | |||
| Soldering Information (SOIC infrared) | 220 | °C | Infrared (15 seconds), small outline package | 4 | |||
| ESD Electrostatic Discharge (HBM) | V(ESD) | -250 | 250 | V | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 | 4 | |
| Input Offset Voltage | 2 | 7 | mV | TA = 25°C; see note (2): VO ≈ 1.4 V, RS = 0 Ω | 6 | ||
| Input Bias Current | IIN(+) or IIN(−) | 45 | 250 | nA | VCM = 0 V, TA = 25°C | 6 | |
| Input Offset Current | IIN(+) or IIN(−) | 5 | 50 | nA | VCM = 0 V, TA = 25°C | 6 | |
| Input Common-Mode Voltage Range | 0 | V | V+ = 30 V (LM2902-N, V+ = 26 V), TA = 25°C | 6 | |||
| Supply Current (V+ = 30 V) | 1.5 | 3 | mA | Over full temperature range, RL = ∞ on all op amps, V+ = 30 V (LM2902-N V+ = 26 V) | 6 | ||
| Supply Current (V+ = 5 V) | 0.7 | 1.2 | mA | Over full temperature range, RL = ∞ on all op amps, V+ = 5 V | 6 | ||
| Large Signal Voltage Gain | 25 | 100 | V/mV | V+ = 15 V, RL ≥ 2 kΩ, VO = 1 V to 11 V, TA = 25°C | 6 | ||
| Common-Mode Rejection Ratio | 50 | 70 | dB | DC, VCM = 0 V to V+ − 1.5 V, TA = 25°C | 6 | ||
| Power Supply Rejection Ratio | 50 | 100 | dB | V+ = 5 V to 26 V (LM2902-N), TA = 25°C | 6 | ||
| Output Current Source | 20 | 40 | mA | VIN+ = 1 V, VIN− = 0 V, V+ = 15 V, VO = 2 V, TA = 25°C | 7 | ||
| Output Current Sink | 10 | 20 | mA | VIN− = 1 V, VIN+ = 0 V, V+ = 15 V, VO = 2 V, TA = 25°C | 7 | ||
| Output Current Sink | 12 | 50 | µA | VIN− = 1 V, VIN+ = 0 V, V+ = 15 V, VO = 200 mV, TA = 25°C | 7 | ||
| Short Circuit to Ground | 40 | 60 | mA | V+ = 15 V, TA = 25°C | 7 | ||
| Input Offset Voltage (over temperature) | 10 | mV | See note (2) | 7 | |||
| Input Offset Current (IIN(+) − IIN(−)) | IIN(+) − IIN(−) | 45 | 200 | nA | VCM = 0 V | 7 | |
| Input Bias Current | IIN(+) or IIN(−) | 40 | 500 | nA | 7 | ||
| Input Common-Mode Voltage Range (over temperature) | 0 | V | V+ = 30 V (LM2902-N, V+ = 26 V) | 7 | |||
| Large Signal Voltage Gain (over temperature) | 15 | V/mV | V+ = 15 V (VOSwing = 1 V to 11 V), RL ≥ 2 kΩ | 7 | |||
| Output Voltage Swing High (RL = 2 kΩ) | VOH | 22 | V | V+ = 30 V (LM2902-N, V+ = 26 V), RL = 2 kΩ | 7 | ||
| Output Voltage Swing High (RL = 10 kΩ) | VOH | 23 | 24 | V | V+ = 30 V (LM2902-N, V+ = 26 V), RL = 10 kΩ | 7 | |
| Output Voltage Swing Low | VOL | 5 | 100 | mV | V+ = 5 V, RL = 10 kΩ | 7 | |
| Output Current Source (over temperature) | 10 | 20 | mA | VO = 2 V, VIN+ = +1 V, VIN− = 0 V, V+ = 15 V | 7 | ||
| Output Current Sink (over temperature) | 5 | 8 | mA | VIN− = +1 V, VIN+ = 0 V, V+ = 15 V | 7 | ||
| Amplifier-to-Amplifier Coupling | -120 | dB | f = 1 kHz to 20 kHz, TA = 25°C (input referred) | 6 | |||
| Input Offset Voltage Drift | VOS Drift | 7 | µV/°C | RS = 0 Ω | 7 | ||
| Input Offset Current Drift | IOS Drift | 10 | pA/°C | RS = 0 Ω | 7 | ||
| Junction-to-Ambient Thermal Resistance | RθJA | 88 | °C/W | D (SOIC) 14-pin package | 5 |
CAD (KiCad official)
- Symbol:
LM2902MX - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14-150mil (KiCad packages3D, STEP)
- 3D model files:
lm2902mx-etched.step/lm2902mx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2902mx.step/lm2902mx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (41 pp, sha256
f924ff4374f2a2c6, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).