3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMCP1826S-3002E
Microchip Tech · Linear Voltage Regulators (LDO) · SOT-223-3
MCP1826S-3002E from Microchip Tech, in a SOT-223-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Connect the unregulated or regulated input voltage source to VIN, and use an input capacitor of 1 µF to 10 µF when the source is remote or a battery. |
| 2 | GND | power_in | Connect GND to a quiet circuit ground, since the pin conducts only the quiescent current of the LDO (typically 120 µA). |
| 3 | VOUT | power_out | Regulated output voltage of the LDO, which requires a minimum output capacitance of 1.0 µF for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-223-3 |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 2.3 | 6 | V | Note 1 | 7 | |
| Maximum Output Current | IOUT | 1000 | mA | VIN = 2.3V to 6.0V; VR = 0.8V to 5.0V, Note 1 | 7 | ||
| Input Quiescent Current | Iq | 120 | 220 | µA | IL = 0 mA, VOUT = 0.8V to 5.0V | 7 | |
| Line Regulation | VOUT/(VOUT x VIN) | -0.2 | 0.05 | 0.2 | %/V | (Note 1) VIN 6V | 7 |
| Load Regulation | VOUT/VOUT | -1 | 0.5 | 1 | % | IOUT = 1 mA to 1000 mA, (Note 4) | 7 |
| Voltage Regulation (fixed output, 3.0V nominal) | VOUT | -2.5 | 0.5 | 2.5 | % | Note 2, VR = 3.0V nominal | 7 |
| Dropout Voltage | VDROPOUT | 250 | 400 | mV | Note 5, IOUT = 1000 mA, VIN(MIN) = 2.3V | 8 | |
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | Steady State | 9 | |
| Maximum Junction Temperature | TJ | 150 | °C | Transient | 9 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 9 | ||
| Thermal Resistance, 3L-SOT-223 (junction to air) | JA | 62 | °C/W | EIA/JEDEC JESD51-751-7 4 Layer Board | 9 | ||
| Thermal Resistance, 3L-SOT-223 (junction to case) | JC | 15 | °C/W | 4 Layer Board | 9 |
CAD (KiCad official)
- Symbol:
MCP1826S-3002E - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223-3 (KiCad packages3D, STEP)
- 3D model files:
mcp1826s-3002e-etched.step/mcp1826s-3002e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1826s-3002e.step/mcp1826s-3002e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (42 pp, sha256
60292851fbdf446e, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).