Loads on click. Unloads when scrolled away or the tab is hidden.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

PCB Footprint

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Loads on click. Unloads when scrolled away or the tab is hidden.
Download PDF
Contents

README

markdown

LTC5507ES6#TRPBF

Analog Devices · RF Detectors · TSOT-23-6L

LTC5507ES6#TRPBF from Analog Devices, in a TSOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SHDN input Shutdown Input (active low). A logic low or no-connect places the part in shutdown mode; a logic high enables the part. Has an internal 150k pull-down resistor to ensure shutdown when the driver is tri-stated. VIH min 1.4V, VIL max 0.35V (VCC 2.7V-6V).
2 GND power_in System Ground reference for the device.
3 VOUT output Buffered and level-shifted detector output voltage. Drives the DC detected voltage proportional to the RF input power. Maximum output current 5mA; typical output 250mV with no RF input.
4 VCC power_in Power Supply Voltage, 2.7V to 6V. Should be bypassed with 0.1uF and 100pF ceramic capacitors. Typical operating current 550uA; shutdown current <2uA.
5 PCAP passive Peak Detector Hold Capacitor pin. External capacitor connects between PCAP and VCC; its value depends on RF frequency (C2 >= 1/(30*f_MHz) uF).
6 RFIN input RF Input Voltage, referenced to VCC. A coupling capacitor must be used to connect to the RF signal source. Contains an internal 250 ohm termination and an internal Schottky diode detector. Input frequency range 100kHz-1000MHz; max input power +14dBm.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TSOT-23-6L
Category RF And Wireless
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • LTC5507ES6#TRPBF

CAD (KiCad official)

  • Symbol: LTC5507ES6#TRPBF
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: TSOT-23-6L (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (8 pp, sha256 bf1d24f179a71da5, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF