Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM32F105RCT7

STMicroelectronics · ST Microelectronics · LQFP-64(10x10)

STM32F105RCT7 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBAT power_in Backup supply for the RTC, the external 32 kHz oscillator and backup registers, 1.8 to 3.6 V, used through the power switch when VDD is not present.
2 PC13-TAMPER-RTC bidirectional General-purpose I/O (TAMPER-RTC alternate function) supplied through the power switch; in output mode it is limited to 2 MHz with a 30 pF maximum load and only one such pin may be in output mode at a time.
3 PC14-OSC32_IN bidirectional General-purpose I/O or OSC32_IN for the 32.768 kHz LSE oscillator; supplied through the power switch, so output use is limited to 2 MHz with a 30 pF maximum load and one output pin at a time.
4 PC15-OSC32_OUT bidirectional General-purpose I/O or OSC32_OUT for the 32.768 kHz LSE oscillator; supplied through the power switch, so output use is limited to 2 MHz with a 30 pF maximum load and one output pin at a time.
5 OSC_IN input External 3-25 MHz HSE oscillator input; on LQFP64 this pin is OSC_IN after reset, while the PD0 function can be remapped here by software.
6 OSC_OUT output External 3-25 MHz HSE oscillator output; on LQFP64 this pin is OSC_OUT after reset, while the PD1 function can be remapped here by software.
7 NRST bidirectional Device reset pin, listed in the pin definitions as an I/O with no alternate function.
8 PC0 bidirectional General-purpose I/O with ADC12_IN10 analog input; it is not 5 V tolerant (no FT rating in the pin table).
9 PC1 bidirectional General-purpose I/O with ADC12_IN11 analog input; it is not 5 V tolerant (no FT rating in the pin table).
10 PC2 bidirectional General-purpose I/O with ADC12_IN12 analog input; it is not 5 V tolerant (no FT rating in the pin table).
11 PC3 bidirectional General-purpose I/O with ADC12_IN13 analog input; it is not 5 V tolerant (no FT rating in the pin table).
12 VSSA power_in Analog ground, which must be connected to VSS.
13 VDDA power_in Analog supply for the ADC, reset blocks, RCs and PLL, 2.0 to 3.6 V, with a minimum of 2.4 V when the ADC is used, and it must be connected to VDD.
14 PA0-WKUP bidirectional General-purpose I/O with WKUP wake-up function, ADC12_IN0 analog input, and TIM2_CH1_ETR and USART2_CTS alternate functions; it is not 5 V tolerant.
15 PA1 bidirectional General-purpose I/O with ADC12_IN1 analog input and USART2_RTS and TIM5_CH2 alternate functions; it is not 5 V tolerant.
16 PA2 bidirectional General-purpose I/O with ADC12_IN2 analog input and USART2_TX and TIM5_CH3 alternate functions; it is not 5 V tolerant.
17 PA3 bidirectional General-purpose I/O with ADC12_IN3 analog input and USART2_RX and TIM5_CH4 alternate functions; it is not 5 V tolerant.
18 VSS_4 power_in Digital ground pin; all voltages are referenced to VSS.
19 VDD_4 power_in Digital supply for the I/Os and internal regulator, 2.0 to 3.6 V.
20 PA4 bidirectional General-purpose I/O with DAC_OUT1 output, ADC12_IN4 analog input, and SPI1_NSS, USART2_CK and SPI3_NSS/I2S3_WS alternate functions; it is not 5 V tolerant.
21 PA5 bidirectional General-purpose I/O with DAC_OUT2 output, ADC12_IN5 analog input, and SPI1_SCK alternate function; it is not 5 V tolerant.
22 PA6 bidirectional General-purpose I/O with ADC12_IN6 analog input and SPI1_MISO, TIM3_CH1 and TIM1_BKIN alternate functions; it is not 5 V tolerant.
23 PA7 bidirectional General-purpose I/O with ADC12_IN7 analog input and SPI1_MOSI, TIM3_CH2 and TIM1_CH1N alternate functions; it is not 5 V tolerant.
24 PC4 bidirectional General-purpose I/O with ADC12_IN14 analog input; it is not 5 V tolerant.
25 PC5 bidirectional General-purpose I/O with ADC12_IN15 analog input; it is not 5 V tolerant.
26 PB0 bidirectional General-purpose I/O with ADC12_IN8 analog input and TIM3_CH3 and TIM1_CH2N alternate functions; it is not 5 V tolerant.
27 PB1 bidirectional General-purpose I/O with ADC12_IN9 analog input and TIM3_CH4 and TIM1_CH3N alternate functions; it is not 5 V tolerant.
28 PB2/BOOT1 bidirectional 5 V tolerant general-purpose I/O that also serves as the BOOT1 boot-option pin sampled at startup.
29 PB10 bidirectional 5 V tolerant I/O with I2C2_SCL, USART3_TX and TIM2_CH3 alternate functions.
30 PB11 bidirectional 5 V tolerant I/O with I2C2_SDA, USART3_RX and TIM2_CH4 alternate functions.
31 VSS_1 power_in Digital ground pin; all voltages are referenced to VSS.
32 VDD_1 power_in Digital supply for the I/Os and internal regulator, 2.0 to 3.6 V.
33 PB12 bidirectional 5 V tolerant I/O with SPI2_NSS/I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN and CAN2_RX alternate functions.
34 PB13 bidirectional 5 V tolerant I/O with SPI2_SCK/I2S2_CK, USART3_CTS, TIM1_CH1N and CAN2_TX alternate functions.
35 PB14 bidirectional 5 V tolerant I/O with SPI2_MISO, TIM1_CH2N and USART3_RTS alternate functions.
36 PB15 bidirectional 5 V tolerant I/O with SPI2_MOSI/I2S2_SD and TIM1_CH3N alternate functions.
37 PC6 bidirectional 5 V tolerant I/O with I2S2_MCK and TIM3_CH1 alternate functions.
38 PC7 bidirectional 5 V tolerant I/O with I2S3_MCK and TIM3_CH2 alternate functions.
39 PC8 bidirectional 5 V tolerant I/O with TIM3_CH3 alternate function.
40 PC9 bidirectional 5 V tolerant I/O with TIM3_CH4 alternate function.
41 PA8 bidirectional 5 V tolerant I/O with USART1_CK, OTG_FS_SOF, TIM1_CH1 and MCO alternate functions.
42 PA9 bidirectional 5 V tolerant I/O with USART1_TX, TIM1_CH2 and OTG_FS_VBUS alternate functions.
43 PA10 bidirectional 5 V tolerant I/O with USART1_RX, TIM1_CH3 and OTG_FS_ID alternate functions.
44 PA11 bidirectional 5 V tolerant I/O with USART1_CTS, CAN1_RX, TIM1_CH4 and OTG_FS_DM alternate functions.
45 PA12 bidirectional 5 V tolerant I/O with USART1_RTS, OTG_FS_DP, CAN1_TX and TIM1_ETR alternate functions.
46 PA13 bidirectional 5 V tolerant I/O which after reset is the JTMS-SWDIO serial-wire debug data pin.
47 VSS_2 power_in Digital ground pin; all voltages are referenced to VSS.
48 VDD_2 power_in Digital supply for the I/Os and internal regulator, 2.0 to 3.6 V.
49 PA14 bidirectional 5 V tolerant I/O which after reset is the JTCK-SWCLK serial-wire debug clock pin.
50 PA15 bidirectional 5 V tolerant I/O which after reset is JTDI, with SPI3_NSS/I2S3_WS, TIM2_CH1_ETR and SPI1_NSS alternate functions.
51 PC10 bidirectional 5 V tolerant I/O with UART4_TX, USART3_TX and SPI3_SCK/I2S3_CK alternate functions.
52 PC11 bidirectional 5 V tolerant I/O with UART4_RX, USART3_RX and SPI3_MISO alternate functions.
53 PC12 bidirectional 5 V tolerant I/O with UART5_TX, USART3_CK and SPI3_MOSI/I2S3_SD alternate functions.
54 PD2 bidirectional 5 V tolerant I/O with TIM3_ETR and UART5_RX alternate functions.
55 PB3 bidirectional 5 V tolerant I/O which after reset is JTDO, with SPI3_SCK/I2S3_CK, TRACESWO, TIM2_CH2 and SPI1_SCK alternate functions.
56 PB4 bidirectional 5 V tolerant I/O which after reset is NJTRST, with SPI3_MISO, TIM3_CH1 and SPI1_MISO alternate functions.
57 PB5 bidirectional I/O with I2C1_SMBA, SPI3_MOSI/I2S3_SD, TIM3_CH2, SPI1_MOSI and CAN2_RX alternate functions; it is not 5 V tolerant.
58 PB6 bidirectional 5 V tolerant I/O with I2C1_SCL, TIM4_CH1, USART1_TX and CAN2_TX alternate functions.
59 PB7 bidirectional 5 V tolerant I/O with I2C1_SDA, TIM4_CH2 and USART1_RX alternate functions.
60 BOOT0 input Boot selection input sampled at startup together with BOOT1 to choose boot from User Flash, System Memory or embedded SRAM.
61 PB8 bidirectional 5 V tolerant I/O with TIM4_CH3, I2C1_SCL and CAN1_RX alternate functions.
62 PB9 bidirectional 5 V tolerant I/O with TIM4_CH4, I2C1_SDA and CAN1_TX alternate functions.
63 VSS_3 power_in Digital ground pin; all voltages are referenced to VSS.
64 VDD_3 power_in Digital supply for the I/Os and internal regulator, 2.0 to 3.6 V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-64(10x10)
Category Embedded Processors & Controllers
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage characteristics: external main supply voltage (VDD-VSS) VDD-VSS -0.3 4 V Including VDDA and VDD 36
Input voltage on any other pin VIN 4 V 36
Variations between different VDD power pins /ΔVDDx/ 50 mV 36
Variations between all the different ground pins /VSSX −VSS/ 50 mV 36
Total current into VDD/VDDA power lines (source) IVDD 150 mA 36
Total current out of VSS ground lines (sink) IVSS 150 mA 36
Output current sunk by any I/O and control pin IIO 25 mA 36
Output current source by any I/Os and control pin IIO -25 mA 36
Injected current on five volt tolerant pins IINJ(PIN) -5 0 mA 36
Injected current on any other pin IINJ(PIN) -5 5 mA 36
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) -25 25 mA 36
Storage temperature range TSTG -65 150 °C 37
Maximum junction temperature TJ 150 °C 37
Internal AHB clock frequency fHCLK 0 72 MHz 37
Internal APB1 clock frequency fPCLK1 0 36 MHz 37
Internal APB2 clock frequency fPCLK2 0 72 MHz 37
Standard operating voltage VDD 2 3.6 V 37
Analog operating voltage (ADC not used) VDDA 2 3.6 V Must be the same potential as VDD 37
Analog operating voltage (ADC used) VDDA 2.4 3.6 V ADC used 37
Backup operating voltage VBAT 1.8 3.6 V 37
Power dissipation LQFP64 PD 444 mW TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 37
Ambient temperature, 7 suffix version, maximum power dissipation TA -40 105 °C Maximum power dissipation, 7 suffix version 37
Ambient temperature, 7 suffix version, low power dissipation TA -40 125 °C Low power dissipation, 7 suffix version 37
Junction temperature range, 7 suffix version TJ -40 125 °C 7 suffix version 37
Programmable voltage detector level, rising edge VPVD 2.1 2.18 2.26 V PLS[2:0]=000 (rising edge) 38
Programmable voltage detector level, falling edge VPVD 2 2.08 2.16 V PLS[2:0]=000 (falling edge) 38
Programmable voltage detector level, rising edge VPVD 2.76 2.88 3 V PLS[2:0]=111 (rising edge) 38
Programmable voltage detector level, falling edge VPVD 2.66 2.78 2.9 V PLS[2:0]=111 (falling edge) 38
Power on/power down reset threshold VPOR/PDR 1.8 1.88 1.96 V Falling edge 38
Power on/power down reset threshold VPOR/PDR 1.84 1.92 2 V Rising edge 38
Reset temporization TRSTTEMPO 1 2.5 4.5 ms 38
Internal reference voltage VREFINT 1.16 1.2 1.26 V -40 °C < TA < +105 °C 39
Internal reference voltage spread over the temperature range VRERINT 10 mV VDD = 3 V 39
Temperature coefficient TCoeff 100 ppm/°C 39
Supply current in Run mode, code from Flash IDD 68.4 mA External clock, all peripherals enabled, fHCLK = 72 MHz, TA = 105 °C 40
Supply current in Run mode, code from Flash IDD 32.9 mA External clock, all peripherals disabled, fHCLK = 72 MHz, TA = 105 °C 40
Supply current in Run mode, code from RAM IDD 66 mA External clock, all peripherals enabled, fHCLK = 72 MHz, TA = 105 °C 40
Supply current in Run mode, code from RAM IDD 31.9 mA External clock, all peripherals disabled, fHCLK = 72 MHz, TA = 105 °C 40
Supply current in Sleep mode IDD 49 mA External clock, all peripherals enabled, fHCLK = 72 MHz, TA = 105 °C 41
Supply current in Sleep mode IDD 10.6 mA External clock, all peripherals disabled, fHCLK = 72 MHz, TA = 105 °C 41
Supply current in Stop mode IDD 1300 µA Regulator in Run mode, low-speed and high-speed internal RC oscillators and high-speed oscillator OFF (no independent watchdog), TA = 105 °C 41
Supply current in Stop mode IDD 1280 µA Regulator in Low Power mode, low-speed and high-speed internal RC oscillators and high-speed oscillator OFF (no independent watchdog), TA = 105 °C 41
Supply current in Standby mode IDD 6.5 µA Low-speed internal RC oscillator and independent watchdog OFF, low-speed oscillator and RTC OFF, TA = 105 °C 41
Backup domain supply current IDD_VBAT 2.3 µA Low-speed oscillator and RTC ON, TA = 105 °C 41
External user clock source frequency (HSE) fHSE_ext 1 8 50 MHz 47
Duty cycle (HSE external clock) DuCy(HSE) 45 55 % 47
Oscillator frequency (HSE crystal/ceramic resonator) fOSC_IN 3 25 MHz 49
LSI oscillator frequency fLSI 30 40 60 kHz VDD = 3 V, TA = -40 to 105 °C 52
16-bit programming time tprog 40 52.5 70 µs TA = -40 to +105 °C 54
Page (1 KB) erase time tERASE 20 40 ms TA = -40 to +105 °C 54
Mass erase time tME 20 40 ms TA = -40 to +105 °C 54
Supply current, Read mode IDD 20 mA fHCLK = 72 MHz with 2 wait states, VDD = 3.3 V 54
Supply current, Write / Erase modes IDD 5 mA fHCLK = 72 MHz, VDD = 3.3 V 54
Supply current, Power-down mode / Halt IDD 50 µA VDD = 3.0 to 3.6 V 54
Programming voltage Vprog 2 3.6 V 54
Endurance NEND 10 Kcycles TA = -40 to +105 °C (7 suffix versions) 54
Data retention tRET 30 years 1 kcycle at TA = 85 °C 54
Data retention tRET 10 years 1 kcycle at TA = 105 °C 54
Data retention tRET 20 years 10 kcycles at TA = 55 °C 54
NRST Input low level voltage VIL(NRST) -0.5 0.8 V 62

CAD (KiCad official)

  • Symbol: STM32F105RCT7
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: stm32f105rct7-etched.step / stm32f105rct7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f105rct7.step / stm32f105rct7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (108 pp, sha256 ca4bad652e5eb36d, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF