3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownRS90LV047YTSS16
Jiangsu RUNIC Tech · LVDS ICs · TSSOP-16
RS90LV047YTSS16 from Jiangsu RUNIC Tech, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Driver enable: when EN is low the driver is disabled; when EN is high and EN* is low or open the driver is enabled, and if both EN and EN* are open the driver is disabled. |
| 2 | DIN1 | input | Channel 1 driver input, TTL/CMOS compatible. |
| 3 | DIN2 | input | Channel 2 driver input, TTL/CMOS compatible. |
| 4 | VCC | power_in | Power supply pin, +3.3 V ± 0.3 V. |
| 5 | GND | power_in | Ground (group) pin. |
| 6 | DIN3 | input | Channel 3 driver input, TTL/CMOS compatible. |
| 7 | DIN4 | input | Channel 4 driver input, TTL/CMOS compatible. |
| 8 | EN* | input | Driver enable (active low): when EN* is high the driver is disabled; when EN* is low or open and EN is high the driver is enabled, and if both EN and EN* are open the driver is disabled. |
| 9 | DOUT4- | output | Inverting driver output for channel 4, LVDS levels. |
| 10 | DOUT4+ | output | Non-inverting driver output for channel 4, LVDS levels. |
| 11 | DOUT3+ | output | Non-inverting driver output for channel 3, LVDS levels. |
| 12 | DOUT3- | output | Inverting driver output for channel 3, LVDS levels. |
| 13 | DOUT2- | output | Inverting driver output for channel 2, LVDS levels. |
| 14 | DOUT2+ | output | Non-inverting driver output for channel 2, LVDS levels. |
| 15 | DOUT1+ | output | Non-inverting driver output for channel 1, LVDS levels. |
| 16 | DOUT1- | output | Inverting driver output for channel 1, LVDS levels. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VCC) | VCC | -0.3 | 4 | V | 7 | ||
| Input voltage (DIN) | -0.3 | V | 7 | ||||
| Enable input voltage (EN, EN*) | -0.3 | V | 7 | ||||
| Output voltage (DOUT+, DOUT-) | -0.3 | 3.9 | V | 7 | |||
| Storage Temperature | -65 | 150 | °C | 7 | |||
| Maximum Junction Temperature | 150 | °C | 7 | ||||
| Supply Voltage (VCC) | VCC | 3 | 3.3 | 3.6 | V | 7 | |
| Temperature (TA) | TA | -40 | 25 | 85 | °C | 7 | |
| Differential output voltage | /VOD/ | 250 | 350 | 450 | mV | RL=100Ω | 8 |
| Offset voltage | VOS | 1.125 | 1.23 | 1.375 | V | 8 | |
| Output high voltage | VOH | 1.41 | 1.6 | V | 8 | ||
| Output low voltage | VOL | 0.92 | 1.06 | V | 8 | ||
| Input high voltage | VIH | 2 | V | 8 | |||
| Input low voltage | VIL | 0.8 | V | 8 | |||
| Input high current | IIH | -10 | 5.1 | 10 | µA | VIN=3.3V or 2.5V | 8 |
| Input low current | IIL | -10 | 0 | 10 | µA | VIN=0 or 0.4V | 8 |
| Output short-circuit current | IOS | -9 | -6.2 | mA | ENABLED, DIN=VCC, DOUT+=0V or DIN=GND, DOUT-=0V | 8 | |
| Differential output short-circuit | IOSD | -9 | -4.4 | mA | ENABLED, VOD=0V | 8 | |
| Power-off leakage | IOFF | 0 | 20 | µA | VOUT=0 or 3.6V, VCC=0V or Open | 8 | |
| Output TRI-STATE current | IOZ | 0 | 10 | µA | EN=0.8V and EN*=2V, VOUT=0V or VCC | 8 | |
| No load supply current drivers enabled | ICC | 3.8 | 8 | mA | DIN=VCC or GND | 8 | |
| Loaded supply current drivers enabled | ICCL | 26.4 | 30 | mA | RL=100Ω all channels, DIN=VCC or GND (all input) | 8 | |
| No load supply current drivers disabled | ICCZ | 3.8 | 6 | mA | DIN=VCC or GND, EN=GND, EN*=VCC | 8 | |
| Differential propagation delay high to low | tPHLD | 0.7 | 0.8 | 1.15 | ns | RL=100Ω | 8 |
| Differential propagation delay low to high | tPLHD | 0.9 | 1 | 1.26 | ns | RL=100Ω | 8 |
| Differential pulse skew /tPHLD - tPLHD/ | tSKD1 | 0.2 | 0.375 | ns | RL=100Ω | 8 | |
| Rise time | tTLH | 0.6 | 1.2 | ns | 8 | ||
| Fall time | tTHL | 0.5 | 1.2 | ns | 8 | ||
| Disable time high to Z | tPHZ | 2.2 | 4 | ns | 8 | ||
| Disable time low to Z | tPLZ | 2.2 | 4 | ns | 8 | ||
| Enable time Z to high | tPZH | 3 | 4 | ns | 8 | ||
| Enable time Z to low | tPZL | 3 | 4 | ns | 8 | ||
| Maximum operating frequency | fMAX | 200 | 250 | MHz | tr=tf<1 ns (0%-100%), 50%, 0 to 3V; duty cycle 45%-55%, VOD>250mV | 8 |
CAD (KiCad official)
- Symbol:
RS90LV047YTSS16 - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
rs90lv047ytss16-etched.step/rs90lv047ytss16-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs90lv047ytss16.step/rs90lv047ytss16.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (14 pp, sha256
e702186b490e828b, retrieved 2026-11-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).