3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMCP14A1201-E
Microchip Tech · Gate Drive ICs · SOIC-8
MCP14A1201-E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Bias supply input for the MOSFET driver with a voltage range of 4.5V to 18V, which must be decoupled to ground with a local capacitor. |
| 2 | IN | input | High-impedance control input with low threshold levels and hysteresis for noise immunity. |
| 3 | EN | input | High-impedance active-high device enable; driving it below the threshold disables the output and pulls OUT/OUT low, and an internal pull-up lets the pin float for normal operation. |
| 4 | GND | power_in | Power ground return for the input and output stages, which should have a low-impedance connection to the bias supply return. |
| 5 | GND | power_in | Power ground return for the input and output stages, which should have a low-impedance connection to the bias supply return. |
| 6 | OUT/OUT | output | CMOS push-pull output capable of sourcing and sinking 12.0A of peak current at VDD = 18V, with a 500 mA reverse current latch-up rating. |
| 7 | OUT/OUT | output | CMOS push-pull output capable of sourcing and sinking 12.0A of peak current at VDD = 18V, with a 500 mA reverse current latch-up rating. |
| 8 | VDD | power_in | Bias supply input for the MOSFET driver with a voltage range of 4.5V to 18V, which must be decoupled to ground with a local capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 4.5 | 18 | V | 4 | ||
| Supply Voltage (absolute maximum) | VDD | 20 | V | 3 | |||
| Specified Temperature Range | TA | -40 | 125 | °C | 5 | ||
| Maximum Junction Temperature | TJ | 150 | °C | 5 | |||
| Storage Temperature Range | TA | -65 | 150 | °C | 5 | ||
| Logic '1' High Input Voltage | VIH | 2 | 1.6 | V | 3 | ||
| Logic '0' Low Input Voltage | VIL | 1.3 | 0.8 | V | 3 | ||
| Input Current | IIN | -1 | 1 | µA | 0V VIN VDD | 3 | |
| Logic '1' High Enable Voltage | VEH | 2 | 1.6 | V | 3 | ||
| Logic '0' Low Enable Voltage | VEL | 1.3 | 0.8 | V | 3 | ||
| Propagation Delay | tD3 | 28 | 33 | ns | VDD = 18V, VEN = 5V, see Figure 4-3, (Note 1) | 3 | |
| Low Output Voltage | VOL | 0.025 | V | IOUT = 0A | 3 | ||
| Output Resistance, High | ROH | 0.9 | 1.5 | Ω | IOUT = 10 mA, VDD = 18V | 3 | |
| Output Resistance, Low | ROL | 0.6 | 1.2 | Ω | IOUT = 10 mA, VDD = 18V | 3 | |
| Latch-Up Protection Withstand Reverse Current | IREV | 0.5 | A | Duty cycle 2%, t 300 µs | 3 | ||
| Rise Time | tR | 25 | 30 | ns | VDD = 18V, CL = 15,000 pF, see Figure 4-1, Figure 4-2 | 3 | |
| Fall Time | tF | 25 | 30 | ns | VDD = 18V, CL = 15,000 pF, see Figure 4-1, Figure 4-2 | 3 | |
| Delay Time | tD1 | 28 | 33 | ns | VDD = 18V, VIN = 5V, see Figure 4-1 and Figure 4-2 | 4 | |
| Power Supply Current | IDD | 360 | 600 | µA | VIN = 3V, VEN = 3V | 4 | |
| Input Current | IIN | -10 | 10 | µA | 0V VIN VDD | 4 | |
| Logic '1' High Input Voltage | VIH | 2 | 1.6 | V | 4 | ||
| Logic '0' Low Input Voltage | VIL | 1.3 | 0.8 | V | 4 | ||
| Logic '1' High Enable Voltage | VEH | 2 | 1.6 | V | 4 | ||
| Logic '0' Low Enable Voltage | VEL | 1.3 | 0.8 | V | 4 | ||
| Propagation Delay | tD3 | 32 | 37 | ns | VDD = 18V, VEN = 5V, TA = +125°C, see Figure 4-3, (Note 1) | 4 | |
| Low Output Voltage | VOL | 0.025 | V | DC Test | 4 | ||
| Output Resistance, High | ROH | 2 | Ω | IOUT = 10 mA, VDD = 18V | 4 | ||
| Output Resistance, Low | ROL | 1.7 | Ω | IOUT = 10 mA, VDD = 18V | 4 | ||
| Rise Time | tR | 30 | 35 | ns | VDD = 18V, CL = 15,000 pF, TA = +125°C, see Figure 4-1, Figure 4-2 | 5 | |
| Fall Time | tF | 30 | 35 | ns | VDD = 18V, CL = 15,000 pF, TA = +125°C, see Figure 4-1, Figure 4-2 | 5 | |
| Delay Time | tD1 | 32 | 37 | ns | VDD = 18V, VIN = 5V, TA = +125°C, see Figure 4-1, Figure 4-2 | 5 | |
| Power Supply Current | IDD | 750 | µA | VIN = 3V, VEN = 3V | 5 | ||
| Junction-to-Ambient Thermal Resistance, 8LD SOIC | JA | 99.8 | °C/W | Note 1 | 5 | ||
| Junction-to-Top Characterization Parameter, 8LD SOIC | JT | 5.9 | °C/W | Note 1 | 5 | ||
| Junction-to-Board Characterization Parameter, 8LD SOIC | JB | 64.8 | °C/W | Note 1 | 5 | ||
| Package Power Dissipation, 8L SOIC | PD | 1 | W | TA = +50°C | 3 | ||
| ESD Protection on all pins (HBM) | 2 | kV | HBM | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 19 |
CAD (KiCad official)
- Symbol:
MCP14A1201-E - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mcp14a1201-e-etched.step/mcp14a1201-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp14a1201-e.step/mcp14a1201-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (30 pp, sha256
29d100f19f6fdaa2, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).