component
LM2651MTCX-ADJ
Public Made by Adomby adom
Texas Instruments DC-DC Converters, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM2651MTCX-ADJ
Texas Instruments · DC-DC Converters · TSSOP-16
LM2651MTCX-ADJ from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switched-node connection, connected to the source of the internal high-side MOSFET. |
| 2 | SW | output | Switched-node connection, connected to the source of the internal high-side MOSFET. |
| 3 | VIN | power_in | Main power supply pin; the recommended supply voltage range is 4 V to 14 V, with an absolute maximum of 15 V. |
| 4 | VIN | power_in | Main power supply pin; the recommended supply voltage range is 4 V to 14 V, with an absolute maximum of 15 V. |
| 5 | VIN | power_in | Main power supply pin; the recommended supply voltage range is 4 V to 14 V, with an absolute maximum of 15 V. |
| 6 | VCB | input | Bootstrap capacitor connection for high-side gate drive. |
| 7 | AVIN | power_in | Input supply voltage for control and driver circuits. |
| 8 | SD(SS) | input | Shutdown and soft-start control pin; pulling it below 0.3 V shuts off the regulator, a capacitor to ground sets the input-current control ramp, and it must not be driven by an external source. |
| 9 | FB | input | Output voltage feedback input, connected to the output voltage; absolute maximum feedback pin voltage is −0.4 V to 5 V. |
| 10 | COMP | input | Compensation network connection, connected to the output of the voltage error amplifier. |
| 11 | NC | unconnected | No internal connection. |
| 12 | AGND | power_in | Low-noise analog ground. |
| 13 | AGND | power_in | Low-noise analog ground. |
| 14 | PGND | power_in | Power ground. |
| 15 | PGND | power_in | Power ground. |
| 16 | PGND | power_in | Power ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Power Management (PMIC) |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
LM2651MTCX-ADJ - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
lm2651mtcx-adj-etched.step/lm2651mtcx-adj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2651mtcx-adj.step/lm2651mtcx-adj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
a40ea9383fcae0d4, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).