component
MLX90365KGO-ABD-000-RE
Public Made by Adomby adom
Melexis Angle, Linear Position Sensors, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMLX90365KGO-ABD-000-RE
Melexis · Angle, Linear Position Sensors · TSSOP-16
MLX90365KGO-ABD-000-RE from Melexis, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDIG1 | passive | Die 1 internal digital supply (VDIG) pin of the dual-die TSSOP-16 package. |
| 2 | VSS1 | power_in | Ground (VSS) of die 1. |
| 3 | VDD1 | power_in | Supply voltage of die 1, with absolute maximum overvoltage of +24 V and reverse voltage protection of -12 V. |
| 4 | Test01 | passive | Test 0 pin of die 1; recommended to be connected to ground for optimal EMC behavior. |
| 5 | Test22 | passive | Test 2 pin listed at position 5 in the pinout table (die 2 designation); recommended to be connected to ground for optimal EMC behavior. |
| 6 | OUT2 | output | Analog (ratiometric) or PWM output of die 2. |
| 7 | Not Used2 | unconnected | Not used pin of die 2; recommended to be connected to ground for optimal EMC behavior. |
| 8 | Test12 | passive | Test 1 pin of die 2; recommended to be connected to ground for optimal EMC behavior. |
| 9 | VDIG2 | passive | Die 2 internal digital supply (VDIG) pin of the dual-die TSSOP-16 package. |
| 10 | VSS2 | power_in | Ground (VSS) of die 2. |
| 11 | VDD2 | power_in | Supply voltage of die 2, with absolute maximum overvoltage of +24 V and reverse voltage protection of -12 V. |
| 12 | Test02 | passive | Test 0 pin of die 2; recommended to be connected to ground for optimal EMC behavior. |
| 13 | Test21 | passive | Test 2 pin listed at position 13 in the pinout table (die 1 designation); recommended to be connected to ground for optimal EMC behavior. |
| 14 | Not Used1 | unconnected | Not used pin of die 1; recommended to be connected to ground for optimal EMC behavior. |
| 15 | OUT1 | output | Analog (ratiometric) or PWM output of die 1. |
| 16 | Test11 | passive | Test 1 pin of die 1; recommended to be connected to ground for optimal EMC behavior. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Melexis |
| Package | TSSOP-16 |
| Category | Sensors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Nominal Supply Voltage | VDD | 4.5 | 5 | 5.5 | V | 9 | |
| Supply Current, power saving enabled | IDD | 6 | 8 | mA | Power saving Enabled; dual version x2 | 9 | |
| Supply Current, power saving disabled | IDD | 10 | 12 | mA | Power saving Disabled; dual version x2 | 9 | |
| Isurge Current | Isurge | 20 | mA | Early start-up time only | 9 | ||
| Power-On reset (rising) | HPOR_LH | 2 | 2.25 | 2.5 | V | Refer to internal voltage Vdig | 9 |
| Power-On reset Hysteresis | HPOR_Hyst | 50 | 200 | mV | 9 | ||
| Start-up Level (rising) | MT4V LH | 3.8 | 4 | 4.2 | V | 9 | |
| Start-up Hysteresis | MT4V Hyst | 50 | 200 | mV | 9 | ||
| PTC Entry Level (rising) | MT7V_LH | 5.8 | 6.2 | 6.6 | V | 9 | |
| PTC Entry Level Hysteresis | MT7V_Hyst | 50 | 200 | mV | 9 | ||
| Supply Voltage (overvoltage) | VDD | 24 | V | 8 | |||
| Reverse Voltage Protection | -12 | V | breakdown at -14 V | 8 | |||
| Positive Output Voltage | 18 | V | breakdown at 24 V | 8 | |||
| Output Current | IOUT | 30 | mA | in breakdown | 8 | ||
| Reverse Output Voltage | -0.3 | V | 8 | ||||
| Reverse Output Current | -50 | mA | in breakdown | 8 | |||
| Operating Ambient Temperature Range | TA | -40 | 150 | Deg.C | 8 | ||
| Storage Temperature Range | TS | -40 | 150 | Deg.C | 8 | ||
| Magnetic Flux Density (absolute maximum) | -1 | 1 | T | 8 | |||
| Main Clock Frequency | Ck | 12.6 | 13.3 | 14 | MHz | All contributors included thermal drift | 12 |
| Main Clock Frequency Thermal Drift | ∆TCk | -3 | 3 | %CkNOM | 12 | ||
| Refresh Rate | tper | 275 | 290 | 305 | μs | 12 | |
| Watchdog | Twd | 114.5 | 118 | 121.5 | ms | 12 | |
| Start-up Cycle, analog | Tsu | 5 | ms | Analog OUT Slew-rate excluded | 12 | ||
| PWM Frequency | FPWM | 100 | 1000 | Hz | Programmable Range (PWM Output Enabled) | 13 | |
| PWM Frequency Initial Tolerance | -2 | 2 | %FPWM | 25 Deg.C | 13 | ||
| PWM Frequency Tolerance after EOL tuning | -1 | 1 | %FPWM | 25 Deg.C | 13 | ||
| PWM Frequency Thermal/Lifetime drift | -3 | 3 | %FPWM | 13 | |||
| Thermal Offset Drift #1 | -60 | 60 | LSB15 | Temperature suffix K; at the DSP input (excl. DAC and output stage) | 14 | ||
| Thermal Offset Drift #2 | -0.2 | 0.2 | %VDD | DAC and Output Stage | 14 | ||
| Thermal Drift of Sensitivity Mismatch XY | -0.5 | 0.5 | % | XY axis, Temp. suffix K & L | 14 | ||
| Thermal Drift of Sensitivity Mismatch XZ (YZ) | -1 | 1 | % | XZ (YZ) axis, Temp. suffix K & L | 14 | ||
| Magnetic Angle phase error XY | -0.3 | 0.3 | Deg. | TA = 25°C, XY axis | 14 | ||
| Magnetic Angle phase error XZ | -2 | 2 | Deg. | TA = 25°C, XZ axis | 14 | ||
| Magnetic Angle phase error YZ | -2 | 2 | Deg. | TA = 25°C, YZ axis | 14 | ||
| XY Intrinsic Linearity Error | Le | -1 | 1 | Deg | TA = 25°C, factory trim. "SMISM" | 14 | |
| INL (before EOL calibration) | -4 | 4 | LSB12 | 15 | |||
| Ratiometry Error | -0.05 | 0.05 | %VDD | 4.5V ≤ VDD ≤ 5.5V | 15 | ||
| Ratiometry Error (extended) | -0.1 | 0.1 | %VDD | LT4V ≤ VDD ≤ MT7V | 15 | ||
| Magnetic Flux Density BX, BY | √[BX²+BY²] | 70 | mT | 18 | |||
| Magnetic Flux Norm | Norm | 20 | mT | √[BX²+BY²+(Bz/1.2)²] | 18 | ||
| IMC Gain in X and Y | GainIMCXY | 1.2 | 1.4 | 1.8 | 18 | ||
| k factor | k | 1 | 1.2 | 1.5 | GainIMCXY / GainIMCZ | 18 | |
| Magnet Temperature Coefficient | TCm | -2400 | 0 | ppm/Deg.C | 18 | ||
| Operating temperature (suffix K) | TA | -40 | 125 | Deg.C | Temperature code K | 5 |
CAD (KiCad official)
- Symbol:
MLX90365KGO-ABD-000-RE - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
mlx90365kgo-abd-000-re-etched.step/mlx90365kgo-abd-000-re-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mlx90365kgo-abd-000-re.step/mlx90365kgo-abd-000-re.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Melexis datasheet (46 pp, sha256
869be61c8e84e859, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).