3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNCV4949CPDR2G
onsemi · Linear Voltage Regulators (LDO) · SOIC-8-EP
NCV4949CPDR2G from onsemi, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply voltage input with a DC operating range of 5.5 V to 40 V, and transients up to 60 V (load dump, ISO16750-2 test B). |
| 2 | Si | input | Input of the sense comparator, rated −40 V to 45 V with input current limited to −1.0 mA to 1.0 mA. |
| 3 | NC | unconnected | No connect pin. |
| 4 | CT | passive | Reset delay capacitor pin; the reset pulse delay is set by the charge time of CT (tRD = CT × 2.0 V / 2.0 µA) and the pin is rated −0.3 V to 7.0 V. |
| 5 | GND | power_in | Ground reference pin for the device. |
| 6 | Reset | output | Output of the reset comparator, rated −0.3 V to 7.0 V and −5.0 mA to 5.0 mA, with a low output voltage of at most 0.3 V. |
| 7 | SO | output | Output of the sense comparator, rated −0.3 V to 7.0 V and −5.0 mA to 5.0 mA, with a low output voltage of at most 0.4 V. |
| 8 | Vout | power_out | Main regulator output of 5.0 V (4.9 V to 5.1 V over the specified load and supply range), internally current limited, with a maximum rating of 20 V. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-8-EP |
| Category | Power Supply Chip |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC Operating Supply Voltage | VCC | 5.5 | 40 | V | 2 | ||
| Output Voltage (TJ = 25C, Iout = 1.0 mA) | Vout | 4.95 | 5 | 5.05 | V | TJ = 25C, Iout = 1.0 mA | 3 |
| Output Voltage (6.0 V < VCC < 28 V, 1.0 mA < Iout < 50 mA) | Vout | 4.9 | 5 | 5.1 | V | 6.0 V < VCC < 28 V, 1.0 mA < Iout < 50 mA | 3 |
| Output Voltage (VCC = 35 V, t < 1.0 s, 1.0 mA < Iout < 50 mA) | Vout | 4.9 | 5 | 5.1 | V | VCC = 35 V, t < 1.0 s, 1.0 mA < Iout < 50 mA | 3 |
| Dropout Voltage (Iout = 10 mA) | Vdrop | 0.08 | 0.25 | V | Iout = 10 mA | 3 | |
| Dropout Voltage (Iout = 50 mA) | Vdrop | 0.18 | 0.4 | V | Iout = 50 mA | 3 | |
| Dropout Voltage (Iout = 100 mA) | Vdrop | 0.22 | 0.5 | V | Iout = 100 mA | 3 | |
| Input to Output Voltage Difference in Undervoltage Condition | VIO | 0.12 | 0.4 | V | VCC = 4.0 V, Iout = 35 mA | 3 | |
| Line Regulation | Regline | 1 | 20 | mV | 6.0 V < VCC < 28 V, Iout = 1.0 mA | 3 | |
| Load Regulation | Regload | 1 | 30 | mV | 1.0 mA < Iout < 100 mA | 3 | |
| Current Limit (Vout = 4.5 V) | ILim | 105 | 320 | 400 | mA | Vout = 4.5 V | 3 |
| Quiescent Current (Iout = 0.3 mA, TJ < 100C) | IQSE | 120 | 260 | A | Iout = 0.3 mA, TJ < 100C | 3 | |
| Quiescent Current (Iout = 100 mA) | IQ | 5 | mA | Iout = 100 mA | 3 | ||
| Reset Threshold Hysteresis (@ TJ = 25C) | VResth,hys | 50 | 100 | 200 | mV | TJ = 25C | 3 |
| Reset Threshold Hysteresis (@ TJ = −40 to +125C) | VResth,hys | 50 | 300 | mV | TJ = −40 to +125C | 3 | |
| Reset Pulse Delay | tResD | 55 | 100 | 180 | ms | CT = 100 nF, tR 100 s | 3 |
| Reset Reaction Time | tResR | 5 | 30 | s | CT = 100 nF | 3 | |
| Reset Output Low Voltage | VResL | 0.3 | V | RReset = 10 k to Vout, VCC ≥ 3.0 V | 3 | ||
| Reset Output High Leakage Current | IResH | 1 | A | VReset = 5.0 V | 3 | ||
| Sense Low Threshold (VSI Decreasing = 1.5 V to 1.0 V) | VSOth | 1.16 | 1.25 | 1.35 | V | VSI decreasing = 1.5 V to 1.0 V | 3 |
| Sense Threshold Hysteresis | VSOth,hys | 20 | 100 | 200 | mV | 3 | |
| Sense Output Low Voltage | VSOL | 0.4 | V | VSI ≤ 1.16 V, VCC ≥ 3.0 V, RSO = 10 k to Vout | 3 | ||
| Sense Output Leakage | ISOH | 1 | A | VSO = 5.0 V, VSI ≤ 1.5 V | 3 | ||
| Sense Input Current | ISI | -1 | 0.1 | 1 | A | 3 | |
| Thermal Shutdown Temperature | TSD | 150 | 200 | C | Iout = 1 mA (Note 6) | 3 | |
| VCC Input to Regulator | VCC | -40 | 45 | V | 2 | ||
| VCC Transient Supply Voltage | VCC TR | 60 | V | Load Dump Test B, ISO16750-2 (Note 1) | 2 | ||
| Output Voltage | Vout | -0.5 | 20 | V | Output | 2 | |
| Output Current | Iout | -10 | mA | Max: Internally Limited | 2 | ||
| Sense Input Voltage | VSI | -40 | 45 | V | Sense Input | 2 | |
| Sense Input Current | ISI | -1 | 1 | mA | Sense Input | 2 | |
| Sense Output Voltage | VSO | -0.3 | 7 | V | Sense Output | 2 | |
| Sense Output Current | ISO | -5 | 5 | mA | Sense Output | 2 | |
| Reset Output Voltage | VReset | -0.3 | 7 | V | Reset Output | 2 | |
| Reset Output Current | IReset | -5 | 5 | mA | Reset Output | 2 | |
| Reset Delay Voltage | VCT | -0.3 | 7 | V | Reset Delay | 2 | |
| ESD Protection (Human Body Model) | 4000 | V | Human Body Model, any pin | 2 | |||
| ESD Protection (Machine Model) | 400 | V | Machine Model, any pin | 2 | |||
| Operating Junction Temperature Range | TJ | -40 | 150 | C | 2 | ||
| Storage Temperature Range | TSTG | -50 | 150 | C | 2 | ||
| Reflow Time Above 217 C (lead free) | Tsld | 60 | 150 | sec | Above 217 C, reflow lead free (SMD styles only) | 2 | |
| Reflow Peak Temperature (lead free) | Tsld | 260 | C | 40 sec max at peak | 2 | ||
| Current Limit (Vout = 0 V) | ILim | 220 | mA | Vout = 0 V | 3 | ||
| Reset Threshold Voltage | VResth | 4.5 | V | 3 | |||
| Delay Comparator Threshold | VCTth | 2 | V | 3 | |||
| Delay Comparator Threshold Hysteresis | VCTth,hys | 100 | mV | 3 | |||
| Junction-to-Lead Thermal Resistance (1 oz Cu, 100 mm sq. copper area, Note 2) | JL6 | 36.1 | C/W | Note 2: 1 oz. Copper, 100 mm sq. Copper area, 1.5 mm thick FR-4 | 2 | ||
| Junction-to-Lead Thermal Resistance (1 oz Cu, 200 mm sq. copper area, Note 3) | JL6 | 32.1 | C/W | Note 3: 1 oz. Copper, 200 mm sq. Copper area, 1.5 mm thick FR-4 | 2 | ||
| Junction-to-Lead Thermal Resistance (1 oz Cu, 500 mm sq. copper area, Note 4) | JL6 | 27.4 | C/W | Note 4: 1 oz. Copper, 500 mm sq. Copper area, 1.5 mm thick FR-4 | 2 | ||
| Junction-to-Ambient Thermal Resistance (1 oz Cu, 100 mm sq. copper area, Note 2) | RJA | 109.2 | C/W | Note 2: 1 oz. Copper, 100 mm sq. Copper area, 1.5 mm thick FR-4 | 2 | ||
| Junction-to-Ambient Thermal Resistance (1 oz Cu, 200 mm sq. copper area, Note 3) | RJA | 91.1 | C/W | Note 3: 1 oz. Copper, 200 mm sq. Copper area, 1.5 mm thick FR-4 | 2 | ||
| Junction-to-Ambient Thermal Resistance (1 oz Cu, 500 mm sq. copper area, Note 4) | RJA | 71.9 | C/W | Note 4: 1 oz. Copper, 500 mm sq. Copper area, 1.5 mm thick FR-4 | 2 |
CAD (KiCad official)
- Symbol:
NCV4949CPDR2G - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files:
ncv4949cpdr2g-etched.step/ncv4949cpdr2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncv4949cpdr2g.step/ncv4949cpdr2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (12 pp, sha256
c2f184ae2d380780, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).