3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA2690I-14DR
Texas Instruments · Operational Amplifier · SOIC-14
OPA2690I-14DR from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -In A | input | Inverting input for channel A of the operational amplifier. |
| 2 | +In A | input | Non-inverting input for channel A of the operational amplifier. |
| 3 | DIS A | input | Disable control input for channel A; pull LOW to disable amplifier output to high-impedance state, or leave open or pull HIGH for normal operation. |
| 4 | -VS | power_in | Negative supply voltage (ground reference for single supply or negative rail for dual supply); ±2.5V to ±6V or +5V to +12V single supply. |
| 5 | DIS B | input | Disable control input for channel B; pull LOW to disable amplifier output to high-impedance state, or leave open or pull HIGH for normal operation. |
| 6 | +In B | input | Non-inverting input for channel B of the operational amplifier. |
| 7 | -In B | input | Inverting input for channel B of the operational amplifier. |
| 8 | Out A | output | High-current output for channel A with ±4.0V swing capability and 190mA drive current. |
| 9 | NC | unconnected | No connection. |
| 10 | NC | unconnected | No connection. |
| 11 | +VS | power_in | Positive supply voltage; +5V to +12V single supply or ±2.5V to ±6V dual supply. |
| 12 | NC | unconnected | No connection. |
| 13 | NC | unconnected | No connection. |
| 14 | Out B | output | High-current output for channel B with ±4.0V swing capability and 190mA drive current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply | -6.5 | 6.5 | VDC | 2 | |||
| Differential Input Voltage | -1.2 | 1.2 | V | 2 | |||
| Storage Temperature Range (D package) | -65 | 125 | °C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Specified Operating Range (D package) | -40 | 85 | °C | 4 | |||
| Small-Signal Bandwidth | 150 | 220 | MHz | VS = ±5V; G = +2, VO = 0.5VPP | 3 | ||
| Small-Signal Bandwidth | 18 | 30 | MHz | VS = ±5V; G = +10, VO = 0.5VPP | 3 | ||
| Gain Bandwidth Product | 180 | 300 | MHz | VS = ±5V; G ≥ 10 | 3 | ||
| Slew Rate | 900 | 1800 | V/ms | VS = ±5V; G = +2, 4V Step | 3 | ||
| 2nd-Harmonic Distortion | -68 | -60 | dBc | VS = ±5V; G = +2, f = 5MHz, VO = 2VPP, RL = 100Ω | 3 | ||
| 2nd-Harmonic Distortion | -77 | -66 | dBc | VS = ±5V; G = +2, f = 5MHz, VO = 2VPP, RL ≥ 500Ω | 3 | ||
| 3rd-Harmonic Distortion | -70 | -64 | dBc | VS = ±5V; G = +2, f = 5MHz, VO = 2VPP, RL = 100Ω | 3 | ||
| 3rd-Harmonic Distortion | -81 | -75 | dBc | VS = ±5V; G = +2, f = 5MHz, VO = 2VPP, RL ≥ 500Ω | 3 | ||
| Open-Loop Voltage Gain (AOL) | AOL | 54 | 69 | dB | VS = ±5V; VO = 0V, RL = 100Ω | 3 | |
| Input Offset Voltage | -5.2 | 1 | 5.2 | mV | VS = ±5V; VCM = 0V | 3 | |
| Average Offset Voltage Drift | -12 | 12 | mV/°C | VS = ±5V; VCM = 0V | 3 | ||
| Input Bias Current | -13 | 5 | 13 | mA | VS = ±5V; VCM = 0V | 3 | |
| Average Bias Current Drift (magnitude) | -40 | 40 | nA/°C | VS = ±5V; VCM = 0V | 3 | ||
| Input Offset Current | -1.6 | 0.1 | 1.6 | mA | VS = ±5V; VCM = 0V | 3 | |
| Average Offset Current Drift | -1.5 | 1.5 | nA/°C | VS = ±5V; VCM = 0V | 3 | ||
| Common-Mode Input Range (CMIR) | -3.2 | 3.5 | 3.2 | V | VS = ±5V | 3 | |
| Common-Mode Rejection Ratio (CMRR) | 56 | 65 | dB | VS = ±5V; VCM = ±1V | 3 | ||
| Voltage Output Swing | -3.6 | 4 | 3.6 | V | VS = ±5V; No Load | 4 | |
| Voltage Output Swing | -3.3 | 3.9 | 3.3 | V | VS = ±5V; 100Ω Load | 4 | |
| Current Output, Sourcing | 100 | 190 | mA | VS = ±5V; VO = 0V | 4 | ||
| Current Output, Sinking | -100 | -190 | mA | VS = ±5V; VO = 0V | 4 | ||
| Power-Down Supply Current (+VS) | -200 | -520 | mA | VS = ±5V; VDIS = 0V, Both Channels | 4 | ||
| Enable Voltage | 3.7 | 3.3 | V | VS = ±5V | 4 | ||
| Disable Voltage | 1.8 | 1.5 | V | VS = ±5V | 4 | ||
| Control Pin Input Bias Current (VDIS) | 75 | 160 | mA | VS = ±5V; VDIS = 0V, Each Channel | 4 | ||
| Maximum Operating Voltage Range | -6 | 6 | V | VS = ±5V | 4 | ||
| Maximum Quiescent Current (2 Channels) | 11 | 13.2 | mA | VS = ±5V | 4 | ||
| Minimum Quiescent Current (2 Channels) | 8.6 | 11 | mA | VS = ±5V | 4 | ||
| Power-Supply Rejection Ratio (+PSRR) | 64 | 75 | dB | VS = ±5V; Input-Referred | 4 | ||
| Small-Signal Bandwidth | 140 | 190 | MHz | VS = +5V; G = +2, VO < 0.5VPP | 5 | ||
| Small-Signal Bandwidth | 16 | 25 | MHz | VS = +5V; G = +10, VO < 0.5VPP | 5 | ||
| Gain Bandwidth Product | 160 | 250 | MHz | VS = +5V; G ≥ 10 | 5 | ||
| Slew Rate | 550 | 1000 | V/ms | VS = +5V; G = +2, 2V Step | 5 | ||
| 2nd-Harmonic Distortion | -65 | -56 | dBc | VS = +5V; G = +2, f = 5MHz, VO = 2VPP, RL = 100Ω to VS/2 | 5 | ||
| 2nd-Harmonic Distortion | -75 | -66 | dBc | VS = +5V; G = +2, f = 5MHz, VO = 2VPP, RL ≥ 500Ω to VS/2 | 5 | ||
| Open-Loop Voltage Gain (AOL) | AOL | 52 | 63 | dB | VS = +5V; VO = 2.5V, RL = 100Ω to VS/2 | 5 | |
| Input Offset Voltage | -5.2 | 1 | 5.2 | mV | VS = +5V; VCM = 2.5V | 5 | |
| Average Offset Voltage Drift | -10 | 10 | mV/°C | VS = +5V; VCM = 2.5V | 5 | ||
| Input Bias Current | -13 | 5 | 13 | mA | VS = +5V; VCM = 2.5V | 5 | |
| Input Offset Current | -1.6 | 0.3 | 1.6 | mA | VS = +5V; VCM = 2.5V | 5 | |
| Least Positive Input Voltage | 1.5 | 1.8 | V | VS = +5V | 5 | ||
| Most Positive Input Voltage | 3.2 | 3.5 | V | VS = +5V | 5 | ||
| Common-Mode Rejection Ratio (CMRR) | 54 | 63 | dB | VS = +5V; VCM = 2.5V ± 0.5V | 5 | ||
| Most Positive Output Voltage | 3.5 | 4 | V | VS = +5V; No Load | 6 | ||
| Most Positive Output Voltage | 3.4 | 3.9 | V | VS = +5V; RL = 100Ω to 2.5V | 6 | ||
| Least Positive Output Voltage | 1 | 1.5 | V | VS = +5V; No Load | 6 | ||
| Current Output, Sourcing | 80 | 160 | mA | VS = +5V | 6 | ||
| Current Output, Sinking | -80 | -160 | mA | VS = +5V | 6 | ||
| Power-Down Supply Current (+VS) | -200 | -520 | mA | VS = +5V; VDIS = 0V, Both Channels | 6 | ||
| Disable Voltage | 1.8 | 1.5 | V | VS = +5V | 6 | ||
| Maximum Single-Supply Operating Voltage | 12 | V | VS = +5V | 6 | |||
| Maximum Quiescent Current (2 Channels) | 9.8 | 12.1 | mA | VS = +5V | 6 | ||
| Minimum Quiescent Current (2 Channels) | 7.72 | 9.8 | mA | VS = +5V | 6 | ||
| Thermal Resistance, Junction-to-Ambient (SO-14) | qJA | 100 | °C/W | VS = ±5V | 4 | ||
| Thermal Resistance, Junction-to-Ambient (SO-14) | qJA | 150 | °C/W | VS = +5V | 6 |
CAD (KiCad official)
- Symbol:
OPA2690I-14DR - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
opa2690i-14dr-etched.step/opa2690i-14dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa2690i-14dr.step/opa2690i-14dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
5f242534c0830cbb, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).