component
M41T00M6F
Public Made by Adomby adom
STMicroelectronics Real Time Clocks, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownM41T00M6F
STMicroelectronics · Real Time Clocks · SOIC-8
M41T00M6F from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OSCI | input | Oscillator input for the external 32.768 kHz crystal (12.5 pF load capacitance integrated). |
| 2 | OSCO | output | Oscillator output to the external 32.768 kHz crystal (RS max 60 kΩ, 12.5 pF load capacitance integrated). |
| 3 | VBAT | power_in | Battery supply voltage, 2.5 V min to 3.5 V max, used for backup when VCC falls below the switchover point VSO. |
| 4 | VSS | power_in | Ground. |
| 5 | SDA | bidirectional | Serial data address input/output of the I2C bus (100 kHz), requires an external pull-up resistor. |
| 6 | SCL | input | Serial clock input of the I2C bus, up to 100 kHz, requires an external pull-up resistor. |
| 7 | FT/OUT | output | Open-drain frequency test (512 Hz) or output driver reflecting the OUT control bit, requires an external pull-up resistor, up to 5.5 V. |
| 8 | VCC | power_in | Supply voltage, 2.0 to 5.5 V clock operating range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-8 |
| Category | Clock/Timing |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M41T00M6F - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
m41t00m6f-etched.step/m41t00m6f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m41t00m6f.step/m41t00m6f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (25 pp, sha256
19b4ba3db5e73ee2, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).