component
LM3880QMF-1AC
Public Made by Adomby adom
Texas Instruments Supervisor And Reset ICs, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM3880QMF-1AC
Texas Instruments · Supervisor And Reset ICs · SOT-23-6
LM3880QMF-1AC from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Input supply pin, operating range 2.7 V to 5.5 V relative to GND, with absolute maximum of -0.3 V to 6 V; it should be placed as close as possible to the input supply, and a 0.1 µF ceramic bypass is suggested where noise is present. |
| 2 | GND | power_in | Ground reference pin for the sequencer and the reference for the VCC supply and EN and FLAG voltage limits. |
| 3 | EN | input | Precision enable input with a 1.25 V (typical, 1.0 V to 1.4 V) threshold and an internal 7 µA pull-up; it must be kept below the threshold until VCC has risen above its minimum operating voltage, and the datasheet recommends not connecting it directly to VCC. |
| 4 | FLAG3 | output | Open-drain output 3 that needs an external pull-up (typically 100 kΩ) to a supply not exceeding VCC + 0.3 V, with a maximum on-state output current of 50 mA and a low-level output of 0.4 V max at 1.2 mA. |
| 5 | FLAG2 | output | Open-drain output 2 that needs an external pull-up (typically 100 kΩ) to a supply not exceeding VCC + 0.3 V, with a maximum on-state output current of 50 mA and a low-level output of 0.4 V max at 1.2 mA. |
| 6 | FLAG1 | output | Open-drain output 1 that needs an external pull-up (typically 100 kΩ) to a supply not exceeding VCC + 0.3 V, with a maximum on-state output current of 50 mA and a low-level output of 0.4 V max at 1.2 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
LM3880QMF-1AC - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
lm3880qmf-1ac-etched.step/lm3880qmf-1ac-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm3880qmf-1ac.step/lm3880qmf-1ac.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (27 pp, sha256
cff19f703872dfd7, retrieved 2026-10-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).