SQJQ140ER-T1_GE3
Public Made by Adomby adom
Vishay Intertech MOSFETs, PowerPAK 8x8LR. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownSQJQ140ER-T1_GE3
Vishay Intertech · MOSFETs · PowerPAK 8x8LR
SQJQ140ER-T1_GE3 from Vishay Intertech, in a PowerPAK 8x8LR. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
Review notes
- Pin numbering. Vishay's land-pattern drawing (doc 63166, PowerPAK 8 x 8LR) prints no pin numbers. The numbering here follows the datasheet's p.1 pin photo (S1, S2, S3, G4; D5 to D8) and Vishay's case outline doc 79277: S1 to G4 left to right on one row, with D8 to D5 across from them. The
+on the land pattern marks the centre of the R0.2 corner radius, not pin 1. Reviewed by Ray. - Centre copper. The 8.861 x 5.063 centre copper is drawn as printed but has no pad number and no net. The 8x8LR's drain tab is on top, and the underside has no exposed pad. The Fusion/EAGLE .lbr leaves it out.
- Pad corners. Pad corners are drawn square. The drawing specifies R0.2.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | passive | Source. |
| 2 | S | passive | Source. |
| 3 | S | passive | Source. |
| 4 | G | input | Gate. |
| 5 | D | passive | Drain. |
| 6 | D | passive | Drain. |
| 7 | D | passive | Drain. |
| 8 | D | passive | Drain. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay Intertech |
| Package | PowerPAK 8x8LR |
| Category | Discrete Semiconductors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Drain-source breakdown voltage | VDS | 40 | V | VGS = 0, ID = 250 μA | 2 | ||
| Gate-source threshold voltage | VGS(th) | 2.3 | 2.7 | 3.3 | V | VDS = VGS, ID = 250 μA | 2 |
| Gate-source leakage | IGSS | -100 | 100 | nA | VDS = 0 V, VGS = ± 20 V | 2 | |
| Zero gate voltage drain current | IDSS | 1 | μA | VGS = 0 V, VDS = 40 V | 2 | ||
| Zero gate voltage drain current | IDSS | 50 | μA | VGS = 0 V, VDS = 40 V, TJ = 125 °C | 2 | ||
| Zero gate voltage drain current | IDSS | 150 | μA | VGS = 0 V, VDS = 40 V, TJ = 175 °C | 2 | ||
| On-state drain current | ID(on) | 100 | A | VGS = 10 V, VDS ≥ 5 V | 2 | ||
| Drain-source on-state resistance | RDS(on) | 0.00057 | 0.00065 | Ω | VGS = 10 V, ID = 20 A | 2 | |
| Drain-source on-state resistance | RDS(on) | 0.0012 | Ω | VGS = 10 V, ID = 20 A, TJ = 125 °C | 2 | ||
| Drain-source on-state resistance | RDS(on) | 0.0015 | Ω | VGS = 10 V, ID = 20 A, TJ = 175 °C | 2 | ||
| Input capacitance | Ciss | 13160 | 18424 | pF | VGS = 0 V, VDS = 25 V, f = 1 MHz | 2 | |
| Output capacitance | Coss | 3768 | 5276 | pF | VGS = 0 V, VDS = 25 V, f = 1 MHz | 2 | |
| Reverse transfer capacitance | Crss | 226 | 317 | pF | VGS = 0 V, VDS = 25 V, f = 1 MHz | 2 | |
| Total gate charge | Qg | 192 | 288 | nC | VGS = 10 V, VDS = 20 V, ID = 40 A | 2 | |
| Gate resistance | Rg | 0.8 | 1.6 | 2.7 | Ω | f = 1 MHz | 2 |
| Turn-on delay time | td(on) | 24 | 36 | ns | VDD = 20 V, RL = 0.5 Ω, ID ≅ 40 A, VGEN = 10 V, Rg = 1 Ω | 2 | |
| Rise time | tr | 27 | 41 | ns | VDD = 20 V, RL = 0.5 Ω, ID ≅ 40 A, VGEN = 10 V, Rg = 1 Ω | 2 | |
| Turn-off delay time | td(off) | 60 | 90 | ns | VDD = 20 V, RL = 0.5 Ω, ID ≅ 40 A, VGEN = 10 V, Rg = 1 Ω | 2 | |
| Fall time | tf | 26 | 39 | ns | VDD = 20 V, RL = 0.5 Ω, ID ≅ 40 A, VGEN = 10 V, Rg = 1 Ω | 2 | |
| Reverse recovery time | trr | 88 | 176 | ns | VDD = 32 V, IFM = 20 A, di/dt = 100 A/μs | 2 | |
| Reverse recovery charge | Qrr | 184 | 368 | nC | VDD = 32 V, IFM = 20 A, di/dt = 100 A/μs | 2 | |
| Pulsed current | ISM | 776 | A | 2 | |||
| Forward voltage | VSD | 0.8 | 1.1 | V | IF = 50 A, VGS = 0 | 2 | |
| Drain-source voltage | VDS | 40 | V | 1 | |||
| Gate-source voltage | VGS | -20 | 20 | V | 1 | ||
| Continuous drain current | ID | 413 | A | TC = 25 °C | 1 | ||
| Continuous drain current | ID | 238 | A | TC = 125 °C | 1 | ||
| Continuous source current (diode conduction) | IS | 194 | A | 1 | |||
| Pulsed drain current | IDM | 1653 | A | 1 | |||
| Single pulse avalanche current | IAS | 84 | A | L = 0.1 mH | 1 | ||
| Single pulse avalanche energy | EAS | 352 | mJ | L = 0.1 mH | 1 | ||
| Maximum power dissipation | PD | 214 | W | TC = 25 °C | 1 | ||
| Maximum power dissipation | PD | 71 | W | TC = 125 °C | 1 | ||
| Operating junction and storage temperature range | TJ, Tstg | -55 | 175 | °C | 1 | ||
| Soldering recommendations (peak temperature) | 260 | °C | 1 | ||||
| Junction-to-ambient PCB mount | RthJA | 44 | °C/W | PCB mount, 1" square FR4 PCB | 1 | ||
| Junction-to-case (drain) | RthJC | 0.7 | °C/W | 1 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | c. See solder profile (www.vishay.com/doc?73257). The end of the lead terminal is exposed copper (not plated) as a result of the singulation | 1 |
CAD (Adom-generated)
- Symbol:
SQJQ140ER-T1_GE3 - Footprint:
Adom_Gen:Vishay_Intertech_SQJQ140_49ccc9 - 3D model: generated to fit the land (STEP)
- 3D model files:
sqjq140er-t1-ge3-etched.step/sqjq140er-t1-ge3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sqjq140er-t1-ge3.step/sqjq140er-t1-ge3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Vishay Intertech datasheet (8 pp, sha256
35ed056c16279f3d, retrieved 2026-11-09, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.