component
VNN1NV04PTR-E
Public Made by Adomby adom
STMicroelectronics AC-DC Controllers and Regulators, SOT-223. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownVNN1NV04PTR-E
STMicroelectronics · AC-DC Controllers and Regulators · SOT-223
VNN1NV04PTR-E from STMicroelectronics, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INPUT | input | Control/gate input pin. Directly drives the gate of the internal N-channel Power MOSFET through a low-impedance path (VINTH 0.5-2.5 V). Sinks a small IISS (typ. 100 µA) supply current for the internal circuitry. Internally clamped (VINCL ≈ 6.8 V) with a minimum required series impedance RIN MIN = 330 Ω. In an over-temperature fault, the device sinks a diagnostic current Igf (typ. 15 mA) at this pin to signal fault status back to the controller. |
| 2 | DRAIN | power_in | Drain of the internal N-channel Power MOSFET. Internally shorted to the SOT-223 heat-slug tab. Internally clamped drain-source voltage (VCLAMP 40 V typ, 45 V nom, 55 V max). Drain current is internally limited (Ilim typ 1.7 A, max 3.5 A). Static drain-source on-resistance RDS(on) ≤ 250 mΩ at VIN = 5 V, ID = 0.5 A, Tj = 25 °C. |
| 3 | SOURCE | power_in | Source of the internal N-channel Power MOSFET; also the reference for the INPUT pin voltage. Reverse DC output current limited to −3 A through the intrinsic source-drain body diode (VSD ≤ 0.8 V at ISD = 0.5 A). |
| 4 | DRAIN | power_in | SOT-223 heat-slug tab, internally connected to pin 2 (DRAIN). Provides the main thermal path to the PCB copper heatsink area (Rthj-amb 70 °C/W with 50 mm² of Cu). Must be connected to the DRAIN net; a larger copper area lowers Rthj-amb (see Figure 31). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-223 |
| Category | PMIC |
| Pins | 4 |
Ordering variants
Same part, different packaging or reel option.
VNN1NV04P-E (tube)VNN1NV04PTR-E (tape & reel)VNN1NV04PTR-EVNS1NV04P-E (tube)VNN1NV04PTR-EVNS1NV04PTR-E (tape & reel)
CAD (KiCad official)
- Symbol:
VNN1NV04PTR-E - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223 (KiCad packages3D, STEP)
- 3D model files:
vnn1nv04ptr-e-etched.step/vnn1nv04ptr-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);vnn1nv04ptr-e.step/vnn1nv04ptr-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (None pp, sha256
4221a12bb53b0977, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).