component
TS5A22364QDGSRQ1
Public Made by Adomby adom
Texas Instruments Analog Switches, Multiplexers, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTS5A22364QDGSRQ1
Texas Instruments · Analog Switches, Multiplexers · VSSOP-10-0.5mm
TS5A22364QDGSRQ1 from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply power for the device, operating from a single 2.3 V to 5.5 V supply; it must be powered before a voltage is applied to the NC and NO signal paths. |
| 2 | NO1 | bidirectional | Normally open (NO) signal path of switch 1; signal voltage must stay between VCC - 5.5 V and VCC per the recommended operating conditions. |
| 3 | COM1 | bidirectional | Common signal path of switch 1, connected to NO1 or NC1 depending on the IN1 logic level; signal voltage must stay between VCC - 5.5 V and VCC. |
| 4 | NC1 | unconnected | Normally closed (NC) signal path of switch 1; signal voltage must stay between VCC - 5.5 V and VCC, and it is connected to COM1 when IN1 is low. |
| 5 | IN1 | input | Digital control pin that selects COM1 to NC1 when low and COM1 to NO1 when high; it must be held between GND and VCC and should not be left floating. |
| 6 | GND | power_in | Ground reference for the device; digital control inputs and signal voltages are referenced to ground. |
| 7 | IN2 | input | Digital control pin that selects COM2 to NC2 when low and COM2 to NO2 when high; it must be held between GND and VCC and should not be left floating. |
| 8 | NC2 | unconnected | Normally closed (NC) signal path of switch 2; signal voltage must stay between VCC - 5.5 V and VCC, and it is connected to COM2 when IN2 is low. |
| 9 | COM2 | bidirectional | Common signal path of switch 2, connected to NO2 or NC2 depending on the IN2 logic level; signal voltage must stay between VCC - 5.5 V and VCC. |
| 10 | NO2 | bidirectional | Normally open (NO) signal path of switch 2; signal voltage must stay between VCC - 5.5 V and VCC per the recommended operating conditions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Interface |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
TS5A22364QDGSRQ1 - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
ts5a22364qdgsrq1-etched.step/ts5a22364qdgsrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ts5a22364qdgsrq1.step/ts5a22364qdgsrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
86766e8392c67e3c, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).