Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT1782IS5#TRPBF

Analog Devices · Operational Amplifier · TSOT-23-5

LT1782IS5#TRPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Output swings to within 60mV of the positive rail and within 3mV of the negative rail with no load, and sinks or sources over 30mA at ±5V supplies.
2 V- power_in Negative supply pin for single or split supplies with total supply voltage from 2.5V to 18V, and the inputs may be operated up to 18V above V- regardless of V+.
3 +IN input Non-inverting input whose range includes ground and extends above V+, handles 18V differential and common-mode, and has phase reversal protection to 9V below V-.
4 -IN input Inverting input protected to 10V below V- by an internal 6k series resistor and diode, with a maximum differential input voltage of 18V.
5 V+ power_in Positive supply pin for total supply voltage from 2.5V to 18V, reverse battery protected to 18V, and typically bypassed with 0.1µF close to the pin.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TSOT-23-5
Category Operational Amplifier/Comparator
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS 400 800 µV TA = 25°C, VS = 3V/5V 3
Input Offset Voltage VOS 950 µV 0°C ≤ TA ≤ 70°C 3
Input Offset Voltage VOS 1100 µV -40°C ≤ TA ≤ 85°C 3
Input Offset Voltage Drift ∆VOS/∆T 2 5 µV/°C 3
Input Offset Current IOS 0.7 2 nA VCM = 18V (Note 5) 3
Input Bias Current IB 8 15 nA VCM = 18 (Note 5) 3
Input Capacitance CIN 5 pF 3
Input Voltage Range 0 18 V 3
Common Mode Rejection Ratio CMRR 90 100 dB VCM = 0V to VCC, 1V 3
Common Mode Rejection Ratio CMRR 68 80 dB VCM = 0V to 18V (Note 8) 3
Power Supply Rejection Ratio PSRR 90 100 dB VS = 3V to 12.5V, VCM = VO = 1V 3
Large-Signal Voltage Gain AVOL 200 1500 V/mV VS = 3V, VO = 500mV to 2.5V, RL = 10k, TA = 25°C 3
Large-Signal Voltage Gain AVOL 133 V/mV VS = 3V, 0°C ≤ TA ≤ 70°C 3
Large-Signal Voltage Gain AVOL 100 V/mV VS = 3V, -40°C ≤ TA ≤ 85°C 3
Large-Signal Voltage Gain AVOL 400 500 V/mV VS = 5V, VO = 500mV to 4.5V, RL = 10k, TA = 25°C 3
Large-Signal Voltage Gain AVOL 250 V/mV VS = 5V, 0°C ≤ TA ≤ 70°C 3
Large-Signal Voltage Gain AVOL 200 V/mV VS = 5V, -40°C ≤ TA ≤ 85°C 3
Output Voltage Swing LOW VOL 3 8 mV No Load 3
Output Voltage Swing LOW VOL 200 500 mV ISINK = 5mA 3
Output Voltage Swing LOW VOL 400 800 mV VS = 5V, ISINK = 10mA 3
Output Voltage Swing HIGH VOH 2.91 2.94 V VS = 3V, No Load 3
Output Voltage Swing HIGH VOH 2.6 2.8 V VS = 3V, ISOURCE = 5mA 3
Output Voltage Swing HIGH VOH 4.91 4.94 V VS = 5V, No Load 3
Output Voltage Swing HIGH VOH 4.5 4.74 V VS = 5V, ISOURCE = 10mA 3
Short-Circuit Current ISC 5 10 mA VS = 3V, Short to GND 3
Short-Circuit Current ISC 15 30 mA VS = 3V, Short to VCC 3
Short-Circuit Current ISC 20 40 mA VS = 5V, Short to VCC 3
Minimum Supply Voltage 2.7 V 3
Reverse Supply Voltage 18 V IS = -100µA 3
Supply Current IS 40 55 µA TA = 25°C 3
Supply Current IS 60 µA 0°C ≤ TA ≤ 70°C 3
Supply Current IS 65 µA -40°C ≤ TA ≤ 85°C 3
Gain Bandwidth Product GBW 110 200 kHz f = 5kHz, TA = 25°C 4
Gain Bandwidth Product GBW 100 kHz 0°C ≤ TA ≤ 70°C 4
Gain Bandwidth Product GBW 90 kHz -40°C ≤ TA ≤ 85°C 4
Slew Rate SR 0.035 0.07 V/µs AV = -1, RL = ∞, TA = 25°C 4
Slew Rate SR 0.031 V/µs 0°C ≤ TA ≤ 70°C 4
Slew Rate SR 0.028 V/µs -40°C ≤ TA ≤ 85°C 4
Settling Time tS 45 µs VS = 5V, ∆VOUT = 2V to 0.1%, AV = -1 4
Input Noise Voltage en 50 nV/√Hz f = 1kHz 3
Input Noise Voltage 1 µVP-P 0.1Hz to 10Hz 3
Input Offset Voltage VOS 500 900 µV VS = ±5V, TA = 25°C 4
Input Offset Voltage VOS 1050 µV VS = ±5V, 0°C ≤ TA ≤ 70°C 4
Input Offset Voltage VOS 1200 µV VS = ±5V, -40°C ≤ TA ≤ 85°C 4
Input Offset Voltage Drift ∆VOS/∆T 2 5 µV/°C VS = ±5V 4
Input Offset Current IOS 0.7 2 nA VS = ±5V 4
Input Bias Current IB 8 15 nA VS = ±5V 4
Input Voltage Range -5 13 V VS = ±5V 4
Common Mode Rejection Ratio CMRR 68 80 dB VCM = -5V to 13V, VS = ±5V 4
Large-Signal Voltage Gain AVOL 55 150 V/mV VS = ±5V, VO = ±4V, RL = 10k, TA = 25°C 4
Large-Signal Voltage Gain AVOL 40 V/mV VS = ±5V, 0°C ≤ TA ≤ 70°C 4
Large-Signal Voltage Gain AVOL 30 V/mV VS = ±5V, -40°C ≤ TA ≤ 85°C 4
Output Voltage Swing LOW VOL -4.997 -4.992 V VS = ±5V, No Load 5
Output Voltage Swing LOW VOL -4.8 -4.5 V VS = ±5V, ISINK = 5mA 5
Output Voltage Swing LOW VOL -4.6 -4.2 V VS = ±5V, ISINK = 10mA 5
Output Voltage Swing HIGH VOH 4.91 4.94 V VS = ±5V, No Load 5
Output Voltage Swing HIGH VOH 4.6 4.8 V VS = ±5V, ISINK = 5mA 5
Output Voltage Swing HIGH VOH 4.5 4.74 V VS = ±5V, ISINK = 10mA 5
Operating Temperature Range TA -40 85 °C LT1782I 2
Total Supply Voltage V+ to V- 18 V 2
Input Differential Voltage 18 V 2
Input Pin Voltage to V- -10 24 V 2
Junction Temperature TJMAX 150 °C 2
Storage Temperature Range -65 150 °C 2
Lead Temperature 300 °C Soldering, 10 sec 2
Thermal Resistance, Junction-to-Ambient θJA 250 °C/W S5 package 2

CAD (KiCad official)

  • Symbol: LT1782IS5#TRPBF
  • Footprint: Package_TO_SOT_SMD:TSOT-23-5
  • 3D model: TSOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: lt1782is5-trpbf-etched.step / lt1782is5-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1782is5-trpbf.step / lt1782is5-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (16 pp, sha256 4a5e6958f69273f9, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF