3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXL2902
XINLUDA · Operational Amplifier · SOP-14
XL2902 from XINLUDA, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out 1 | output | Output of amplifier 1. |
| 2 | 1IN- | input | Negative (inverting) input of amplifier 1. |
| 3 | 1IN+ | input | Positive (non-inverting) input of amplifier 1. |
| 4 | VCC | power_in | Positive (maximum) power supply, 3.0 V to 32 V single supply (absolute maximum 32 V). |
| 5 | 2IN+ | input | Positive (non-inverting) input of amplifier 2. |
| 6 | 2IN- | input | Negative (inverting) input of amplifier 2. |
| 7 | Out 2 | output | Output of amplifier 2. |
| 8 | Out 3 | output | Output of amplifier 3. |
| 9 | 3IN- | input | Negative (inverting) input of amplifier 3. |
| 10 | 3IN+ | input | Positive (non-inverting) input of amplifier 3. |
| 11 | VEE/GND | power_in | Negative (lowest) power supply or ground for single power supply operation. |
| 12 | 4IN+ | input | Positive (non-inverting) input of amplifier 4. |
| 13 | 4IN- | input | Negative (inverting) input of amplifier 4. |
| 14 | Out 4 | output | Output of amplifier 4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XINLUDA |
| Package | SOP-14 |
| Category | Amplifiers |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage, Single Supply | VCC | 32 | Vdc | 4 | |||
| Power Supply Voltage, Split Supplies | VCC, VEE | 16 | Vdc | 4 | |||
| Differential Input Voltage Range | VIDR | 32 | Vdc | 4 | |||
| Input Common Mode Voltage Range | VICR | -0.3 | 32 | Vdc | 4 | ||
| Junction Temperature | TJ | 150 | C | 4 | |||
| Storage Temperature Range | Tstg | -50 | 150 | C | 4 | ||
| ESD Protection at any Pin, Human Body Model | Vesd | 2000 | V | Human Body Model | 4 | ||
| ESD Protection at any Pin, Machine Model | Vesd | 200 | V | Machine Model | 4 | ||
| Operating Ambient Temperature Range, XL2902 / XD2902N / XL2902-TS | TA | -40 | 105 | C | 4 | ||
| Input Offset Voltage, TA = 25C | VIO | 2 | 7 | mV | VCC = 5.0 V to 30 V; VICR = 0 V to VCC -1.7 V, VO = 1.4 V, RS = 0 Ω; TA = 25C | 5 | |
| Input Offset Voltage, TA = Thigh | VIO | 10 | mV | VCC = 5.0 V to 30 V; VICR = 0 V to VCC -1.7 V, VO = 1.4 V, RS = 0 Ω; TA = Thigh (Note 4) | 5 | ||
| Input Offset Voltage, TA = Tlow | VIO | 10 | mV | VCC = 5.0 V to 30 V; VICR = 0 V to VCC -1.7 V, VO = 1.4 V, RS = 0 Ω; TA = Tlow (Note 4) | 5 | ||
| Input Offset Current | IIO | 5 | 50 | nA | 5 | ||
| Input Offset Current, TA = Thigh to Tlow | IIO | 200 | nA | TA = Thigh to Tlow (Note 4) | 5 | ||
| Input Bias Current | IIB | -90 | -250 | nA | 5 | ||
| Input Bias Current, TA = Thigh to Tlow | IIB | -500 | nA | TA = Thigh to Tlow (Note 4) | 5 | ||
| Input Common Mode Voltage Range, TA = +25C | VICR | 0 | 28.3 | V | VCC = 30 V; TA = +25C | 5 | |
| Input Common Mode Voltage Range, TA = Thigh to Tlow | VICR | 0 | 28 | V | VCC = 30 V; TA = Thigh to Tlow (Note 4) | 5 | |
| Large Signal Open Loop Voltage Gain | AVOL | 25 | 100 | V/mV | RL = 2.0 kΩ, VCC = 15 V, for Large VO Swing | 5 | |
| Large Signal Open Loop Voltage Gain, TA = Thigh to Tlow | AVOL | 15 | V/mV | RL = 2.0 kΩ, VCC = 15 V, for Large VO Swing; TA = Thigh to Tlow (Note 4) | 5 | ||
| Common Mode Rejection Ratio | CMR | 50 | 70 | dB | RS ≤ 10 kΩ | 5 | |
| Power Supply Rejection Ratio | PSR | 50 | 100 | dB | 5 | ||
| Output Voltage High Limit, VCC = 5.0 V | VOH | 3.3 | 3.5 | V | VCC = 5.0 V, RL = 2.0 kΩ, TA = 25°C | 6 | |
| Output Voltage High Limit, VCC = 30 V, RL = 2.0 kΩ | VOH | 26 | V | VCC = 30 V, RL = 2.0 kΩ (TA = Thigh to Tlow) (Note 7) | 6 | ||
| Output Voltage High Limit, VCC = 30 V, RL = 10 kΩ | VOH | 27 | 28 | V | VCC = 30 V, RL = 10 kΩ (TA = Thigh to Tlow) (Note 7) | 6 | |
| Output Voltage Low Limit | VOL | 5 | 100 | mV | VCC = 5.0 V, RL = 10 kΩ, TA = Thigh to Tlow (Note 7) | 6 | |
| Output Source Current, TA = 25°C | IO+ | 20 | 40 | mA | VID = +1.0 V, VCC = 15 V; TA = 25°C | 6 | |
| Output Source Current, TA = Thigh to Tlow | IO+ | 10 | 20 | mA | VID = +1.0 V, VCC = 15 V; TA = Thigh to Tlow (Note 7) | 6 | |
| Output Sink Current, TA = 25°C | IO- | 10 | 20 | mA | VID = -1.0 V, VCC = 15 V; TA = 25°C | 6 | |
| Output Sink Current, TA = Thigh to Tlow | IO- | 5 | 8 | mA | VID = -1.0 V, VCC = 15 V; TA = Thigh to Tlow (Note 7) | 6 | |
| Output Short Circuit to Ground | ISC | 40 | 60 | mA | 6 | ||
| Power Supply Current, VCC = 30 V | ICC | 3 | mA | VCC = 30 V, VO = 0 V, RL = (value not legible in extraction); TA = Thigh to Tlow (Note 7) | 6 | ||
| Power Supply Current, VCC = 5.0 V | ICC | 1.2 | mA | VCC = 5.0 V, VO = 0 V, RL = (value not legible in extraction); TA = Thigh to Tlow (Note 7) | 6 | ||
| Average Temperature Coefficient of Input Offset Voltage | ΔVIO/ΔT | 7 | µV/C | TA = Thigh to Tlow (Notes 4 and 6) | 5 | ||
| Average Temperature Coefficient of Input Offset Current | ΔIIO/ΔT | 10 | pA/C | TA = Thigh to Tlow (Notes 4 and 6) | 5 | ||
| Channel Separation | CS | -120 | dB | 10 kHz ≤ f ≤ 20 kHz, Input Referenced | 5 | ||
| Thermal Resistance, Junction-to-Air, Case 751A (SOP14) | RθJA | 156 | C/W | Note 3: evaluation board with 1 oz. copper traces, minimum pad size; all device outputs active | 4 |
CAD (KiCad official)
- Symbol:
XL2902 - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOP-14 (KiCad packages3D, STEP)
- 3D model files:
xl2902-etched.step/xl2902-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl2902.step/xl2902.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XINLUDA datasheet (14 pp, sha256
384a39e4ec7d0b3c, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).