component
KTM1301SC-ST3
Public Made by Adomby adom
CONNTEK Linear Hall Sensors, SOT-23-3L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownKTM1301SC-ST3
CONNTEK · Linear Hall Sensors · SOT-23-3L
KTM1301SC-ST3 from CONNTEK, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply input for the sensor, which operates from 1.8 V to 5.5 V; a 100 nF capacitor should be placed as close as possible to this pin for noise filtering. |
| 2 | OUTPUT | output | CMOS push-pull output that goes low when the magnetic field exceeds BOP and high when it falls below BRP, with an absolute maximum output drive current of 5 mA. |
| 3 | GND | power_in | Ground reference pin, to be decoupled to VDD with a 100 nF capacitor connected between supply and ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | CONNTEK |
| Package | SOT-23-3L |
| Category | Magnetic Sensors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output low voltage | VOL | 0.008 | 0.05 | V | IOUT=1mA | 5 | |
| Supply voltage | VDD | 1.8 | 5.5 | V | 工作状态 | 5 | |
| Magnetic operating point (south pole, positive) | BOPS | 15 | 18 | 24 | Gauss | TA=+25℃, VDD=3.0V | 7 |
| Magnetic release point (south pole, positive) | BRPS | 9 | 12 | 15 | Gauss | TA=+25℃, VDD=3.0V | 7 |
| Magnetic operating point (north pole, negative) | BOPN | -24 | -18 | -15 | Gauss | TA=+25℃, VDD=3.0V | 7 |
| Magnetic release point (north pole, negative) | BRPN | -15 | -12 | -9 | Gauss | TA=+25℃, VDD=3.0V | 7 |
| Supply voltage range | VDD | 1.8 | 5.5 | V | 芯片工作 | 5 | |
| Operating temperature range | TA | -40 | 125 | °C | 芯片工作 | 5 | |
| Supply voltage (absolute maximum) | VDD | 6 | V | 5 | |||
| Reverse supply voltage | VDD_REV | -0.3 | V | 5 | |||
| Output drive current | IOUTPUT | 5 | mA | 5 | |||
| Maximum withstand magnetic field | B | 3000 | Gauss | <5 min | 5 | ||
| Storage temperature range | TSTG | -50 | 150 | °C | 5 | ||
| Maximum junction temperature | TJ | 150 | °C | 5 | |||
| Reflow soldering maximum temperature | T reflow | 260 | °C | 5 | |||
| ESD HBM (human body model) capability | ESD HBM | 8000 | V | 5 |
CAD (KiCad official)
- Symbol:
KTM1301SC-ST3 - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files:
ktm1301sc-st3-etched.step/ktm1301sc-st3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ktm1301sc-st3.step/ktm1301sc-st3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: CONNTEK datasheet (15 pp, sha256
705409fba63c48e0, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).