3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownIS801BSOT235
analogysemi · Battery Management ICs · SOT23-5
IS801BSOT235 from analogysemi, in a SOT23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | D1 | output | Open drain output 1 that connects to one end of the transformer primary side (absolute maximum 14 V, peak 500 mA). |
| 2 | VCC | power_in | Supply voltage input (2.5 V to 5.5 V) that connects to the transformer primary center-tap and is buffered with a 1 µF to 10 µF ceramic capacitor. |
| 3 | D2 | output | Open drain output 2 that connects to the other end of the transformer primary side (absolute maximum 14 V, peak 500 mA). |
| 4 | GND | power_in | Device ground that connects to board ground. |
| 5 | GND | power_in | Device ground that connects to board ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | analogysemi |
| Package | SOT23-5 |
| Category | Power Management |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (abs max) | VCC | -0.3 | 6 | V | 4 | ||
| Output switch voltage (abs max) | VD1, VD2 | 14 | V | 4 | |||
| Peak output switch current | ID1P, ID2P | 500 | mA | 4 | |||
| Continuous power dissipation | PTOT | 250 | mW | 4 | |||
| Junction temperature | TJ | -40 | 180 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD HBM | V(ESD) | -5000 | 5000 | V | Human-body model, ANSI/ESDA/JEDEC JS-001 | 4 | |
| ESD CDM | V(ESD) | -2000 | 2000 | V | Charged-device model, JESD22-C101 | 4 | |
| Supply Voltage | VCC | 2.5 | 3.3 | 5.5 | V | 5 | |
| Output Switch Voltage | VD1, VD2 | 0 | 11 | V | VCC = 5V ± 10%, transformer with center-tapped primary | 5 | |
| Output Switch Voltage | VD1, VD2 | 0 | 7.2 | V | VCC = 3.3V ± 10% | 5 | |
| D1 and D2 Output Switch Current | ID1, ID2 | 500 | mA | VCC = 5V ± 10%, VD1, VD2 swing ≥ 3.8V | 5 | ||
| Ambient Temperature | TA | -40 | 125 | °C | 5 | ||
| Junction-to-Ambient Thermal Resistance | RθJA | 168 | °C/W | SOT23-5 | 5 | ||
| Junction-to-Case (Top) Thermal Resistance | RθJC (top) | 103 | °C/W | SOT23-5 | 5 | ||
| Junction-to-Board Thermal Resistance | RθJB | 39 | °C/W | SOT23-5 | 5 | ||
| Junction-to-Top Characterization Parameter | ψJT | 10 | °C/W | SOT23-5 | 5 | ||
| Junction-to-Board Characterization Parameter | ψJB | 36 | °C/W | SOT23-5 | 5 | ||
| Junction-to-Case (Bottom) Thermal Resistance | RθJC (bot) | 66 | °C/W | SOT23-5 | 5 | ||
| Switch-On Resistance | RON | 0.36 | 0.6 | Ω | VCC = 3.3V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND. | 6 | |
| Switch-On Resistance | RON | 0.34 | 0.52 | Ω | VCC = 5V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND. | 6 | |
| Average Supply Current | ICC | 200 | 265 | µA | VCC = 3.3V ± 10%, no load | 6 | |
| Average Supply Current | ICC | 375 | 450 | µA | VCC = 5V ± 10%, no load | 6 | |
| D1, D2 Switching Frequency | fSW | 300 | 370 | 550 | kHz | VCC = 3.3V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND. | 6 |
| D1, D2 Switching Frequency | fSW | 300 | 380 | 550 | kHz | VCC = 5V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND. | 6 |
| VCC Under Voltage Lock Out Rising Threshold | VCC_UVLO | 2.2 | 2.55 | V | 6 | ||
| Internal Frequency Dither Range | FREQ_DITH | 4.5 | % | MODE = VDD, CLK_RS unconnected (printed ±4.5) | 6 | ||
| Internal Frequency Dither Step | FREQ_DITH_STEP | 0.6 | % | MODE = VDD, CLK_RS unconnected | 6 | ||
| Max Peak Current of Internal Powerfet during Soft-Start | ISS | 200 | mA | VDD = 3.3V | 6 | ||
| Soft-Start Time | T_SS | 1.2 | ms | MODE = VDD, CLK_RS unconnected | 6 | ||
| Thermal Shutdown Temperature | TSD | 165 | °C | 6 | |||
| Hysteresis of TSD | TSD_HYS | 15 | °C | 6 | |||
| Thermal Shutdown Hiccup Time | T_TSD_HICP | 64 | ms | 6 | |||
| VCC under Voltage Lock Out Falling Threshold | VCC_UVLO | 2 | V | 6 | |||
| D1, D2 Output Rise Time | tr-D | 96 | ns | VCC = 3.3V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND. | 6 | ||
| D1, D2 Output Rise Time | tr-D | 99 | ns | VCC = 5V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND. | 6 | ||
| D1, D2 Output Fall Time | tf-D | 126 | ns | VCC = 3.3V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND. | 6 | ||
| D1, D2 Output Fall Time | tf-D | 71.8 | ns | VCC = 5V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND. | 6 | ||
| Break-Before-Make Time | tBBM | 165 | ns | VCC = 3.3V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND. | 6 | ||
| Break-Before-Make Time | tBBM | 110 | ns | VCC = 5V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND. | 6 |
CAD (KiCad official)
- Symbol:
IS801BSOT235 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT23-5 (KiCad packages3D, STEP)
- 3D model files:
is801bsot235-etched.step/is801bsot235-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);is801bsot235.step/is801bsot235.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: analogysemi datasheet (20 pp, sha256
5309aa9a5f876c8b, retrieved 2026-10-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).