3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXT30PW-M30.G.Y
Polarity is the + / - moulded on the housing; the maker's datasheet does not say which contact it marks. Check the part before wiring.
AMASS · Plug · -
XT30PW-M30.G.Y from AMASS, in a -. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | XT30 male (plug) contact 1, 1.9 mm PCB hole; numbering follows KiCad Connector_AMASS:AMASS_XT30PW-M. Which contact the housing marks + or - is Unknown: Amass prints no contact identity. |
| 2 | 2 | passive | XT30 male (plug) contact 2, 1.9 mm PCB hole; numbering follows KiCad Connector_AMASS:AMASS_XT30PW-M. Which contact the housing marks + or - is Unknown: Amass prints no contact identity. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | AMASS |
| Package | - |
| Category | Industrial Control Electrical |
| Pins | 2 |
CAD (KiCad official)
- Symbol:
XT30PW-M30.G.Y - Footprint:
Connector_AMASS:AMASS_XT30PW-M_1x02_P2.50mm_Horizontal - 3D model: -, generated on the KiCad land (body 13.3 x 9 mm, terminals on the pads, 5.0 mm tall, given). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
xt30pw-m30-g-y-etched.step/xt30pw-m30-g-y-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xt30pw-m30-g-y.step/xt30pw-m30-g-y.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: AMASS datasheet (3 pp, sha256
db3ebbe3384b13e0, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0). Land: Amass prints the hole diagram (datasheet p.3: 2x 1.00 mounting holes 11.00 apart, 2x 1.90 contact holes 5.00 apart, rows 10.00 apart) and no contact numbers; KiCad's AMASS_XT30PW-M places the same holes. Two land readings agreed with it hole for hole and differed only in which contact is 1..