Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NCP115AMX280TCG

onsemi · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · XDFN-4-EP(1x1)

NCP115AMX280TCG from onsemi, in a XDFN-4-EP(1x1). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Regulated 2.8 V output pin (fixed by the '280' option). Requires a ceramic capacitor of at least 1 uF from this pin to GND for stability. Rated for up to 300 mA continuous, with typical dropout of 250 mV at 300 mA.
2 GND power_in Power supply ground and reference return. The exposed pad must be tied to this pin.
3 EN input Active-high enable input. V_EN > 0.9 V turns the regulator on; V_EN < 0.4 V puts it into shutdown (I_DIS ~0.01 uA typ). Absolute max -0.3 V to 6 V; typical input current 0.3 uA at V_EN = 5.5 V. Do not leave floating.
4 IN power_in Unregulated input supply, 1.7 V to 5.5 V operating (absolute max 6 V). A small (>=1 uF) ceramic capacitor from IN to GND is required for stability.
EPAD EPAD power_in Exposed thermal pad on the underside of the XDFN4 package. Must be soldered directly to the GND copper plane for effective heat removal (theta_JA = 208 C/W on 645 mm^2 Cu).

Key specifications

Parameter Value
Manufacturer onsemi
Package XDFN-4-EP(1x1)
Category PMIC
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • NCP115AMX280TCG
  • NCP115AMX280TCGSN

CAD (KiCad official)

  • Symbol: NCP115AMX280TCG
  • Footprint: Package_DFN_QFN:OnSemi_XDFN4-1EP_1.0x1.0mm_EP0.52x0.52mm
  • 3D model: XDFN-4-EP(1x1) (KiCad packages3D, STEP)
  • 3D model files: ncp115amx280tcg-etched.step / ncp115amx280tcg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp115amx280tcg.step / ncp115amx280tcg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (19 pp, sha256 50d755fd53bcfc9a, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF