3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC16F1719-I/PT
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-44(10x10)
PIC16F1719-I from Microchip Tech, in a TQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RC7 | bidirectional | Port C bit 7 general-purpose I/O with analog input AN19, interrupt-on-change and individually programmable weak pull-up. |
| 2 | RD4 | bidirectional | Port D bit 4 general-purpose I/O with analog input AN24. |
| 3 | RD5 | bidirectional | Port D bit 5 general-purpose I/O with analog input AN25. |
| 4 | RD6 | bidirectional | Port D bit 6 general-purpose I/O with analog input AN26. |
| 5 | RD7 | bidirectional | Port D bit 7 general-purpose digital I/O with no analog function listed. |
| 6 | VSS | power_in | Ground reference (one of two VSS pins on the TQFP package). |
| 7 | VDD | power_in | Positive supply, 2.3V to 5.5V for PIC16F170X/171X (one of two VDD pins on the TQFP package). |
| 8 | RB0 | bidirectional | Port B bit 0 I/O with analog input AN12, zero-cross detect (ZCD), default external interrupt input INT and interrupt-on-change. |
| 9 | RB1 | bidirectional | Port B bit 1 I/O with analog input AN10, op amp 2 output OPA2OUT and interrupt-on-change. |
| 10 | RB2 | bidirectional | Port B bit 2 I/O with analog input AN8, op amp 2 inverting input OPA2IN- and interrupt-on-change. |
| 11 | RB3 | bidirectional | Port B bit 3 I/O with analog input AN9, op amp 2 non-inverting input OPA2IN+ and interrupt-on-change. |
| 12 | NC | unconnected | No connect pin on the 44-pin TQFP package. |
| 13 | NC | unconnected | No connect pin on the 44-pin TQFP package. |
| 14 | RB4 | bidirectional | Port B bit 4 I/O with analog input AN11, interrupt-on-change and weak pull-up. |
| 15 | RB5 | bidirectional | Port B bit 5 I/O with analog input AN13, default Timer1 gate input T1G, interrupt-on-change and weak pull-up. |
| 16 | RB6 | bidirectional | Port B bit 6 I/O that is the ICSPCLK in-circuit serial programming clock, with default SCL input, CLCIN2 and weak pull-up. |
| 17 | RB7 | bidirectional | Port B bit 7 I/O that is the ICSPDAT in-circuit serial programming data pin, with DAC1OUT2, DAC2OUT2, CLCIN3 and weak pull-up. |
| 18 | RE3/MCLR/VPP | input | Input-only port E bit 3 that serves as master clear (MCLR) reset input and programming voltage (VPP). |
| 19 | RA0 | bidirectional | Port A bit 0 I/O with analog input AN0, default CLCIN0 input, interrupt-on-change and weak pull-up. |
| 20 | RA1 | bidirectional | Port A bit 1 I/O with analog input AN1, op amp 1 output OPA1OUT, default CLCIN1 input and weak pull-up. |
| 21 | RA2 | bidirectional | Port A bit 2 I/O with analog input AN2, voltage reference Vref- and DAC1OUT1 output. |
| 22 | RA3 | bidirectional | Port A bit 3 I/O with analog input AN3 and voltage reference Vref+. |
| 23 | RA4 | bidirectional | Port A bit 4 I/O with op amp 1 non-inverting input OPA1IN+ and default Timer0 clock input T0CKI. |
| 24 | RA5 | bidirectional | Port A bit 5 I/O with analog input AN4, op amp 1 inverting input OPA1IN-, DAC2OUT1 output and default nSS input. |
| 25 | RE0 | bidirectional | Port E bit 0 general-purpose I/O with analog input AN5. |
| 26 | RE1 | bidirectional | Port E bit 1 general-purpose I/O with analog input AN6. |
| 27 | RE2 | bidirectional | Port E bit 2 general-purpose I/O with analog input AN7. |
| 28 | VDD | power_in | Positive supply, 2.3V to 5.5V for PIC16F170X/171X (second VDD pin on the TQFP package). |
| 29 | VSS | power_in | Ground reference (second VSS pin on the TQFP package). |
| 30 | RA7 | bidirectional | Port A bit 7 I/O that doubles as external oscillator pin OSC1/CLKIN, with NCOCLK input and interrupt-on-change. |
| 31 | RA6 | bidirectional | Port A bit 6 I/O that doubles as external oscillator pin OSC2/CLKOUT with interrupt-on-change. |
| 32 | RC0 | bidirectional | Port C bit 0 I/O with default Timer1 clock input T1CKI, secondary oscillator output SOSCO, interrupt-on-change and weak pull-up. |
| 33 | NC | unconnected | No connect pin on the 44-pin TQFP package. |
| 34 | NC | unconnected | No connect pin on the 44-pin TQFP package. |
| 35 | RC1 | bidirectional | Port C bit 1 I/O with secondary oscillator input SOSCI, interrupt-on-change and weak pull-up. |
| 36 | RC2 | bidirectional | Port C bit 2 I/O with analog input AN14, interrupt-on-change and weak pull-up. |
| 37 | RC3 | bidirectional | Port C bit 3 I/O with analog input AN15, default SCK input, interrupt-on-change and weak pull-up. |
| 38 | RD0 | bidirectional | Port D bit 0 general-purpose I/O with analog input AN20. |
| 39 | RD1 | bidirectional | Port D bit 1 general-purpose I/O with analog input AN21. |
| 40 | RD2 | bidirectional | Port D bit 2 general-purpose I/O with analog input AN22. |
| 41 | RD3 | bidirectional | Port D bit 3 general-purpose I/O with analog input AN23. |
| 42 | RC4 | bidirectional | Port C bit 4 I/O with analog input AN16, interrupt-on-change and weak pull-up. |
| 43 | RC5 | bidirectional | Port C bit 5 I/O with analog input AN17, interrupt-on-change and weak pull-up. |
| 44 | RC6 | bidirectional | Port C bit 6 I/O with analog input AN18, interrupt-on-change and weak pull-up. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-44(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 44 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range (PIC16F170X/171X) | VDD | 2.3 | 5.5 | V | PIC16F170X/171X | 1 | |
| Operating Temperature Range, Industrial | -40 | 85 | °C | Industrial | 1 | ||
| Operating Speed, clock input | 0 | 32 | MHz | 0-32 MHz clock input | 1 | ||
| Internal oscillator calibration accuracy | -1 | 1 | % | 16 MHz internal oscillator block, at calibration | 2 | ||
| Sleep mode current | 50 | nA | @ 1.8V, typical | 1 | |||
| Watchdog Timer current | 500 | nA | @ 1.8V, typical | 1 | |||
| Operating current at 32 kHz | 8 | uA | @ 32 kHz, 1.8V, typical | 1 | |||
| Operating current per MHz | 32 | uA/MHz | @ 1.8V, typical | 1 | |||
| Comparator response time | 50 | ns | High-speed comparators | 1 | |||
| Op amp gain bandwidth product | GBWP | 2 | MHz | Configurable rail-to-rail op amps | 1 |
CAD (KiCad official)
- Symbol:
PIC16F1719-I - Footprint:
Package_QFP:TQFP-44_10x10mm_P0.8mm - 3D model: TQFP-44(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic16f1719-i-etched.step/pic16f1719-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f1719-i.step/pic16f1719-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (18 pp, sha256
91827b6a20ffbd6f, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC16F1719-I/PT. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16F1719-I/P