component
FM24CL16B-GTR
Public Unreviewedby Ray
Infineon FRAM, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
PCB Footprint
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
Datasheet
Open in new tab ↗Loads on click. Unloads when scrolled away or the tab is hidden.
Contents
README
markdownFM24CL16B-GTR
Infineon · FRAM · SOIC-8
FM24CL16B-GTR from Infineon, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connect. Not bonded to the die; may be left floating or tied to any potential. |
| 2 | NC | unconnected | No connect. Not bonded to the die; may be left floating or tied to any potential. |
| 3 | NC | unconnected | No connect. Not bonded to the die; may be left floating or tied to any potential. |
| 4 | VSS | power_in | Ground reference for the device. Must be connected to the system ground (0 V). |
| 5 | SDA | bidirectional | Serial Data/Address. Bi-directional open-drain I2C data line with Schmitt-trigger input and slope-controlled output; requires an external pull-up resistor to VDD. |
| 6 | SCL | input | Serial Clock input for the I2C interface. Data is clocked out of the device on the falling edge and into the device on the rising edge; supports up to 1 MHz. |
| 7 | WP | input | Write Protect. When tied to VDD, the entire memory map is write-protected; when tied to VSS, all addresses are write-enabled. Internally pulled down, so leaving it floating enables writes. |
| 8 | VDD | power_in | Power supply input, 2.7 V to 3.65 V. Bypass with a local decoupling capacitor to VSS near the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
FM24CL16B-GTRFM24CL16B-DGFM24CL16B-DGTR
CAD (KiCad official)
- Symbol:
FM24CL16B-GTR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
fm24cl16b-gtr.step |
122 KB | You want the bare part, or you mark your own boards. |
fm24cl16b-gtr-etched.step |
2.3 MB | You want the part with FM24CL16B-GTR already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 575 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Infineon datasheet (18 pp, sha256
21bd44e8f5d068bb, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).