component

W25N04KVZEIR

Public Made by Adom

by adom

WINBOND Global Sourcing Parts, WSON-8(6x8). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentglobal sourcing partsw25n04kvzeirfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

W25N04KVZEIR

WINBOND · Global Sourcing Parts · WSON-8(6x8)

W25N04KVZEIR from WINBOND, in a WSON-8(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 /CS input Chip Select input: when high the device is deselected and the DO/IO pins are high impedance, and /CS must track the VCC supply level at power-up and power-down.
2 DO (IO1) bidirectional Data Output (Data Input Output 1), used for Standard and Dual SPI instructions and as IO1 for Quad SPI operation.
3 /WP (IO2) bidirectional Write Protect input, active low, which controls Status Register-1 write protection depending on WP-E and also functions as IO2 for Quad SPI; /WP is only available for Standard/Dual SPI as a control function.
4 GND power_in Ground reference for the device.
5 DI (IO0) bidirectional Data Input (Data Input Output 0), used for Standard and Dual SPI instructions and as IO0 for Quad SPI; data is latched on the rising edge of CLK in Standard SPI.
6 CLK input Serial Clock input that provides the timing for serial input and output operations, with up to 104MHz SPI clock frequency supported.
7 /HOLD (IO3) bidirectional Hold input, active low, which pauses device operation while selected in Standard/Dual SPI and becomes IO3 for Quad SPI operations; it must be driven high or pulled up to avoid floating.
8 VCC power_in Power supply; the device operates on a single 2.7V to 3.6V supply.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer WINBOND
Package WSON-8(6x8)
Category Global Sourcing Parts
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (absolute maximum) VCC -0.6 4.6 V 59
Voltage Applied to Any Pin (absolute maximum) VIO -0.6 4.6 V Relative to Ground 59
Transient Voltage on any Pin (absolute maximum) VIOT -2 V <20nS Transient, Relative to Ground 59
Short Circuit Output Current Ios 5 mA 59
Storage Temperature TSTG -65 150 °C 59
Electrostatic Discharge Voltage VESD -2000 2000 V Human Body Model 59
Supply Voltage (operating range) VCC 2.7 3.6 V 59
Ambient Temperature, Operating TA -40 85 °C Industrial Grade 59
VCC (min) to /CS Low tVSL 200 µs 60
Time Delay Before Write Instruction tPUW 1 ms 60
Minimum duration for ensuring initialization will occur tPWD 1 ms 60
VCC voltage for ensuring initialization will occur VPWD 0.7 V 60
Input Capacitance CIN 12 pF VIN = 0V 61
Output Capacitance COUT 16 pF VOUT = 0V 61
Input Leakage ILI -4 4 µA 61
I/O Leakage ILO -4 4 µA 61
Standby Current (85°C) ICC1 20 100 µA /CS = VCC, VIN = GND or VCC (85°C) 61
Standby Current (105°C) ICC1 200 µA /CS = VCC, VIN = GND or VCC (105°C) 61
Deep Power-Down Current ICC2 2 µA /CS = VCC, VIN = GND or VCC 61
Read Current ICC3 25 35 mA C = 0.1 VCC / 0.9 VCC, DO = Open 61
Current Page Program ICC4 25 35 mA /CS = VCC 61
Current Block Erase ICC5 25 35 mA /CS = VCC 61
Input Low Voltage VIL -0.5 V 61
Output Low Voltage VOL 0.4 V IOL = 2.1mA 61
Output High Voltage VOH 2.4 V IOH = -400µA 61
Load Capacitance CL 30 pF 62
Input Rise and Fall Times TR, TF 5 ns 62
Clock frequency for all instructions FR 104 MHz 63
Clock Rise Time peak to peak tCLCH 0.1 V/ns peak to peak 63
Clock Fall Time peak to peak tCHCL 0.1 V/ns peak to peak 63
/CS Active Setup Time relative to CLK tSLCH 5 ns 63
/CS Not Active Hold Time relative to CLK tCHSL 5 ns 63
Data In Setup Time tDVCH 2 ns 63
Data In Hold Time tCHDX 3 ns 63
/CS Active Hold Time relative to CLK tCHSH 3 ns 63
/CS Not Active Setup Time relative to CLK tSHCH 3 ns 63
/CS Deselect Time (Array Read to Array Read) tSHSL1 10 ns Array Read to Array Read 63
/CS Deselect Time (Erase, Program or Read Status Registers) tSHSL2 50 ns Erase, Program or Read Status Registers to Read Status Registers 63
Output Disable Time tSHQZ 7 ns 63
Clock Low to Output Valid tCLQV 7 ns 63
Output Hold Time tCLQX 2 ns 63
/HOLD Active Setup Time relative to CLK tHLCH 5 ns 63
/HOLD Active Hold Time relative to CLK tCHHH 5 ns 63
/HOLD Not Active Setup Time relative to CLK tHHCH 5 ns 64
/HOLD Not Active Hold Time relative to CLK tCHHL 5 ns 64
/HOLD to Output Low-Z tHHQX 7 ns 64
/HOLD to Output High-Z tHLQZ 12 ns 64
Write Protect Setup Time Before /CS Low tWHSL 20 ns 64
Write Protect Hold Time After /CS High tSHWL 100 ns 64
Status Register Write Time tW 50 ns 64
/CS High to Deep Power-Down Mode tDP 3 µs 64
/CS High to Standby Mode (Release DPD) tRES 1.5 ms 64
/CS High to next Instruction after Reset tRST 5 µs during Page Data Read 64
/CS High to next Instruction after Reset tRST 10 µs during Program Execute 64
/CS High to next Instruction after Reset tRST 500 µs during Block Erase 64
/CS High to next instruction after Reset with page 0 data load option tRST2 100 us with page 0 data load option 64
Read Page Data Time (ECC disabled) tRD1 25 µs ECC disabled 64
Read Page Data Time (ECC enabled) tRD2 60 µs ECC enabled 64
Page Program and OTP Lock Time tPP 250 700 us 64
Block Erase Time tBE 2 10 ms 64

CAD (KiCad official)

  • Symbol: W25N04KVZEIR
  • Footprint: Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm
  • 3D model: WSON-8(6x8), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: w25n04kvzeir-etched.step / w25n04kvzeir-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); w25n04kvzeir.step / w25n04kvzeir.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: WINBOND datasheet (73 pp, sha256 5c7bf7fd94f68bea, retrieved 2026-10-17, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF