3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMIC5201YM
Microchip Tech · Power Management Specialized - PMIC · SOIC-8
MIC5201YM from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated output; a 1 µF capacitor to ground is recommended for stability (3.3 µF used in the adjustable application circuit). |
| 2 | ADJ | input | Feedback input (adjustable version only) that sets VOUT = 1.242 V × (1 + R2/R1); a capacitor from ADJ to GND reduces output noise. |
| 3 | GND | power_in | Ground. |
| 4 | NC | unconnected | Not internally connected; connect to ground plane for lowest thermal resistance. |
| 5 | EN | input | Enable input, high = enable and low or open = off/disable, with VEN of 0 V to VIN (VIH ≥ 2.0 V, VIL ≤ 0.5 V). |
| 6 | NC | unconnected | Not internally connected; connect to ground plane for lowest thermal resistance. |
| 7 | NC | unconnected | Not internally connected; connect to ground plane for lowest thermal resistance. |
| 8 | IN | power_in | Unregulated supply input, +2.5 V to +16 V operating for the adjustable version (absolute maximum -20 V to +20 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | VO | -2 | 2 | % | Variation from specified VOUT | 4 | |
| Output Voltage Temperature Coefficient | ΔVO/ΔT | 40 | 150 | ppm/°C | Note 2 | 4 | |
| Line Regulation, Adjustable (25°C) | ΔVO/VO | 0.004 | 0.2 | % | VIN = VOUT + 1V to 16V | 4 | |
| Line Regulation, Adjustable (full temp) | ΔVO/VO | 0.4 | % | VIN = VOUT + 1V to 16V | 4 | ||
| Load Regulation (25°C) | ΔVO/VO | 0.04 | 0.3 | % | IL = 0.1 mA to 150 mA, Note 3 | 4 | |
| Load Regulation (full temp) | ΔVO/VO | 0.4 | % | IL = 0.1 mA to 150 mA, Note 3 | 4 | ||
| Dropout Voltage | VIN, VO | 270 | 400 | mV | IL = 150 mA | 4 | |
| Ground Pin Current | IGND | 270 | 400 | µA | IL = 20 mA | 4 | |
| Ground Pin Current | IGND | 1000 | 2000 | µA | IL = 100 mA | 4 | |
| Ground Pin Current at Dropout | IGDNDO | 270 | 330 | µA | VIN = 0.5V less than specified VOUT, IL = 100 µA, Note 5 | 4 | |
| Current Limit | ILIMIT | 280 | 500 | mA | VOUT = 0V | 4 | |
| Enable Input Voltage Level Low | VIL | 0.5 | V | Logic low (off) | 4 | ||
| Enable Input Voltage Level High | VIH | 2 | V | Logic high (on) | 4 | ||
| Enable Input Current Low | IIL | 0.01 | 1 | µA | VIL ≤ 0.5V | 4 | |
| Enable Input Current High | IIH | 15 | 70 | µA | VIH ≥ 2.0V | 4 | |
| Reference Voltage (25°C) | VREF | 1.223 | 1.242 | 1.255 | V | 5 | |
| Reference Voltage (full temp) | VREF | 1.217 | 1.267 | V | 5 | ||
| Dropout Voltage | VIN, VO | 17 | mV | IL = 100 µA, Note 7 | 4 | ||
| Dropout Voltage | VIN, VO | 130 | mV | IL = 20 mA, Note 7 | 4 | ||
| Dropout Voltage | VIN, VO | 180 | mV | IL = 50 mA, Note 7 | 4 | ||
| Dropout Voltage | VIN, VO | 225 | mV | IL = 100 mA, Note 7 | 4 | ||
| Quiescent Current | IGND | 0.01 | µA | VENABLE ≤ 0.5V (shutdown), Note 7 | 4 | ||
| Ground Pin Current | IGND | 130 | µA | IL = 100 µA, Note 7 | 4 | ||
| Ground Pin Current | IGND | 500 | µA | IL = 50 mA, Note 7 | 4 | ||
| Ground Pin Current | IGND | 3000 | µA | IL = 150 mA, Note 7 | 4 | ||
| Ripple Rejection | PSRR | 75 | dB | f = 100 Hz, IL = 1 mA, Note 7 | 4 | ||
| Thermal Regulation | ΔVO/ΔPD | 0.05 | %/W | Note 6 | 4 | ||
| Output Noise | en | 100 | µV | Note 7 | 4 | ||
| Reference Voltage Temperature Coefficient | ΔVREF/ΔT | 20 | ppm/°C | Note 7 | 5 | ||
| Supply Input Voltage (Adjustable) | VIN | -20 | 20 | V | 3 | ||
| Enable Input Voltage (Adjustable) | VEN | -20 | 20 | V | 3 | ||
| Supply Input Voltage (Adjustable) | VIN | 2.5 | 16 | V | Operating ratings | 3 | |
| Enable Input Voltage | VEN | 0 | V | 0V to VIN | 3 | ||
| Junction Temperature Range | TJ | -40 | 85 | °C | 6 | ||
| Lead Temperature | 260 | °C | Soldering, 5 sec. | 6 | |||
| Thermal Resistance 8-Lead SOIC | θJA | 160 | °C/W | 6 |
CAD (KiCad official)
- Symbol:
MIC5201YM - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mic5201ym-etched.step/mic5201ym-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic5201ym.step/mic5201ym.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (24 pp, sha256
fe433b0f04e61ce2, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).