3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownNCP1012ST65T3G
onsemi · AC-DC Controllers & Regulators · SOT-223-4
NCP1012ST65T3G from onsemi, in a SOT-223-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Powers the internal circuitry, and the supply pin rating is -0.3 to 10 V on all pins except the drain, with an active shunt clamp (8.7 V typical) that acts as opto fail-safe protection. |
| 2 | FB | input | Feedback signal input that sets the peak current setpoint from the optocoupler output, and pulling it down disables the controller. |
| 3 | Drain | passive | Internal drain connection of the 700 V MOSFET, rated -0.3 to 700 V. |
| 4 | GND | power_in | IC ground reference pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-223-4 |
| Category | Power Management ICs |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage on all pins except Pin 5 (Drain) | VCC | -0.3 | 10 | V | On all pins except Pin 5 (Drain) | 4 | |
| Drain Voltage | -0.3 | 700 | V | 4 | |||
| Drain Current Peak during Transformer Saturation NCP1012/13/14 | IDS(pk) | 1 | A | NCP1012/13/14 | 4 | ||
| Maximum Current into Pin 1 when Activating the 8.7 V Active Clamp | I_VCC | 15 | mA | Pin 1 (VCC) | 4 | ||
| Maximum Junction Temperature | TJmax | 150 | °C | 4 | |||
| Storage Temperature Range | -60 | 150 | °C | 4 | |||
| ESD Capability, Human Body Model | 2 | kV | All pins except HV | 4 | |||
| ESD Capability, Machine Model | 200 | V | 4 | ||||
| Thermal Resistance Junction-to-Lead, ST Suffix Plastic Package Case 318E (SOT-223) | RJL | 14 | °C/W | Junction-to-Lead | 4 | ||
| Thermal Resistance Junction-to-Air, ST Suffix SOT-223, 2.0 oz copper clad, 0.36 Sq. Inch | RJA | 74 | °C/W | Junction-to-Air, 2.0 oz (70 µm) printed circuit copper clad, 0.36 Sq. Inch (2.32 Sq. Cm) | 4 | ||
| Thermal Resistance Junction-to-Air, ST Suffix SOT-223, 2.0 oz copper clad, 1.0 Sq. Inch | RJA | 55 | °C/W | Junction-to-Air, 2.0 oz (70 µm) printed circuit copper clad, 1.0 Sq. Inch (6.45 Sq. Cm) | 4 | ||
| VCC Increasing Level at which the Current Source Turns-off | VCCOFF | 7.9 | 8.5 | 9.1 | V | Pin 1; TJ = -40°C to +125°C, VCC = 8.0 V unless otherwise noted | 4 |
| VCC Decreasing Level at which the Current Source Turns-on | VCCON | 6.9 | 7.5 | 8.1 | V | Pin 1; TJ = -40°C to +125°C, VCC = 8.0 V unless otherwise noted | 4 |
| VCC Decreasing Level at which the Latch-off Phase Ends | VCClatch | 4.4 | 4.7 | 5.1 | V | Pin 1 | 4 |
| Internal IC Consumption, MOSFET Switching at 65 kHz | ICC1 | 0.92 | 1.1 | mA | Pin 1; MOSFET switching at 65 kHz (Note 2) | 4 | |
| Active Zener Voltage Positive Offset to VCCOFF | Vclamp | 140 | 200 | 300 | mV | Pin 1 | 4 |
| Latch-off Current NCP1012/13/14 | ILatch | 6.3 | 7.4 | 9.2 | mA | Pin 1; NCP1012/13/14, 0°C < TJ < 125°C; FB = 1.5 V | 4 |
| Latch-off Current NCP1012/13/14 | ILatch | 5.8 | 7.4 | 9.2 | mA | Pin 1; NCP1012/13/14, −40°C < TJ < 125°C; FB = 1.5 V | 4 |
| Power Switch Circuit On-state Resistance NCP1012/13/14 (Id = 50 mA) TJ = 25°C | RDSon | 11 | 19 | Ω | Pin 5; NCP1012/13/14 (Id = 50 mA), TJ = 25°C | 4 | |
| Power Switch Circuit On-state Resistance NCP1012/13/14 (Id = 50 mA) TJ = 125°C | RDSon | 22 | 38 | Ω | Pin 5; NCP1012/13/14 (Id = 50 mA), TJ = 125°C | 4 | |
| Power Switch Circuit and Startup Breakdown Voltage | BVdss | 700 | V | ID(off) = 120 µA, TJ = 25°C | 5 | ||
| High-voltage Current Source, VCC = 8.0 V NCP1012/13/14 0°C < TJ < 125°C | IC1 | 5 | 8 | 10 | mA | Pin 1; VCC = 8.0 V; NCP1012/13/14, 0°C < TJ < 125°C | 5 |
| High-voltage Current Source, VCC = 8.0 V NCP1012/13/14 −40°C < TJ < 125°C | IC1 | 5 | 8 | 11 | mA | Pin 1; VCC = 8.0 V; NCP1012/13/14, −40°C < TJ < 125°C | 5 |
| Maximum Internal Current Setpoint, NCP1012 (Note 3) | Ipeak (11) | 225 | 250 | 275 | mA | TJ = 25°C (Note 3) | 5 |
| Oscillation Frequency, 65 kHz Version, TJ = 25°C (Note 4) | fOSC | 59 | 65 | 71 | kHz | 65 kHz version, TJ = 25°C (Note 4) | 5 |
| Maximum Duty-cycle | Dmax | 62 | 67 | 72 | % | 5 | |
| Temperature Shutdown | TSD | 140 | 150 | 160 | °C | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Copper | Junction−to−Lead Junction−to−Air, 2.0 oz (70 m) Printed Circuit Copper Clad | 4 |
CAD (KiCad official)
- Symbol:
NCP1012ST65T3G - Footprint:
Package_TO_SOT_SMD:SOT-223 - 3D model: SOT-223-4 (KiCad packages3D, STEP)
- 3D model files:
ncp1012st65t3g-etched.step/ncp1012st65t3g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp1012st65t3g.step/ncp1012st65t3g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (25 pp, sha256
95e3c4e712b589f1, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).