component

FT200XD-T

Public Made by Adom

by adom

FTDI USB ICs, DFN-10-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentinterface icsft200xd-tfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

FT200XD-T

FTDI · USB ICs · DFN-10-EP(3x3)

FT200XD-T from FTDI, in a DFN-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 USBDM bidirectional USB Data Signal Minus; datasheet lists type as INPUT.
2 RESET# input Active-low reset input; can be tied to 3V3OUT.
3 3V3OUT power_out 3V3 output at 50mA that may be used to power VCCIO; when VCC is 3V3 this pin is an input and must be connected to pin 4.
4 VCC power_in 5 V (or 3V3) supply to the IC; if VCC is 3V3, 3V3OUT must also be driven with 3V3.
5 CBUS0 bidirectional Configurable CBUS I/O pin whose function is set in the device MTP memory (see CBUS Signal Options, Table 3.4).
6 SCL input I2C clock input; clock stretching is not supported.
7 VCCIO power_in 1V8 - 3V3 supply for the IO cells.
8 SDA bidirectional I2C bi-directional data line; the signal is open drain.
9 GND power_in 0V ground input.
10 USBDP bidirectional USB Data Signal Plus; datasheet lists type as INPUT.
11 GND power_in Centre pad on the package base, internally connected to GND and should be connected to GND.

Key specifications

Parameter Value
Manufacturer FTDI
Package DFN-10-EP(3x3)
Category Interface ICs
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC Operating Supply Voltage VCC 2.97 5 5.5 V Normal Operation 14
VCCIO Operating Supply Voltage VCC2 1.62 3.63 V 14
Operating Supply Current Icc1 6.8 8 9.1 mA Normal Operation 14
3.3V regulator output 3V3 2.97 3.3 3.63 V 14
Output Voltage High (VCCIO=3.3V) Voh 2.97 V Ioh =-2mA; I/O Drive strength = 4mA/8mA/12mA/16mA 15
Output Voltage Low (VCCIO=3.3V) Vol 0.4 V Iol = +2mA; I/O Drive strength = 4mA/8mA/12mA/16mA 15
Input low Switching Threshold (VCCIO=3.3V) Vil 0.8 V LVTTL 15
Input High Switching Threshold (VCCIO=3.3V) Vih 2 V LVTTL 15
Input pull-up resistance (VCCIO=3.3V) Rpu 40 75 190 KΩ Vin = 0 15
Input pull-down resistance (VCCIO=3.3V) Rpd 40 75 190 KΩ Vin =VCCIO 15
Input Leakage Current (VCCIO=3.3V) Iin -10 10 μA Vin = 0 15
Tri-state output leakage current (VCCIO=3.3V) Ioz -10 10 μA Vin = 5.5V or 0 15
Output Voltage High (VCCIO=2.5V) Voh 2.25 V Ioh = +/-2mA; I/O Drive strength = 4mA/8mA/12mA/16mA 16
Output Voltage Low (VCCIO=2.5V) Vol 0.4 V Iol = +/-2mA; I/O Drive strength = 4mA/8mA/12mA/16mA 16
Input low Switching Threshold (VCCIO=2.5V) Vil 0.8 V LVTTL 16
Input High Switching Threshold (VCCIO=2.5V) Vih 0.8 V LVTTL 16
Input pull-up resistance (VCCIO=2.5V) Rpu 40 75 190 KΩ Vin = 0 16
Input pull-down resistance (VCCIO=2.5V) Rpd 40 75 190 KΩ Vin =VCCIO 16
Input Leakage Current (VCCIO=2.5V) Iin -10 10 μA Vin = 0 16
Tri-state output leakage current (VCCIO=2.5V) Ioz -10 10 μA Vin = 5.5V or 0 16
Output Voltage High (VCCIO=1.8V) Voh 1.62 V Ioh = +/-2mA; I/O Drive strength = 4mA/8mA/12mA/16mA 17
Output Voltage Low (VCCIO=1.8V) Vol 0.4 V Iol = +/-2mA; I/O Drive strength = 4mA/8mA/12mA/16mA 17
Input low Switching Threshold (VCCIO=1.8V) Vil 0.77 V LVTTL 17
Input High Switching Threshold (VCCIO=1.8V) Vih 1.6 V LVTTL 17
Input pull-up resistance (VCCIO=1.8V) Rpu 40 75 190 KΩ Vin = 0 17
Input pull-down resistance (VCCIO=1.8V) Rpd 40 75 190 KΩ Vin =VCCIO 17
Input Leakage Current (VCCIO=1.8V) Iin -10 10 μA Vin = 0 17
Tri-state output leakage current (VCCIO=1.8V) Ioz -10 10 μA Vin = 5.5V or 0 17
USB Output Voltage Low Vol 0.2 V USBDP, USBDM 18
USB Input low Switching Threshold Vil 0.8 V USBDP, USBDM 18
USB Input High Switching Threshold Vih 2 V USBDP, USBDM 18
Internal clock frequency of operation 11.98 12 12.02 MHz Note 1: Equivalent to +/-1667ppm 18
Internal clock period 83.19 83.33 83.47 ns 18
Internal clock duty cycle 45 50 55 % 18
MTP write cycles 2000 Cycles minimum 18
Storage Temperature -65 150 °C 13
Ambient Operating Temperature (Power Applied) -40 85 °C 13
VCC Supply Voltage VCC -0.3 5.5 V 13
VCCIO IO Voltage VCCIO -0.3 4 V 13
DC Input Voltage, USBDP and USBDM -0.5 3.63 V 13
DC Input Voltage, High Impedance Bi-directional -0.3 5.8 V powered from VCCIO 13
DC Output Current, Outputs 22 mA 13
Operating Supply Current (USB Suspend) Icc2 125 μA USB Suspend 14
MTP data retention 10 Years 18

CAD (KiCad official)

  • Symbol: FT200XD-T
  • Footprint: Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm
  • 3D model: DFN-10-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: ft200xd-t-etched.step / ft200xd-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ft200xd-t.step / ft200xd-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: FTDI datasheet (44 pp, sha256 7f7fae38c64134d3, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF