3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownESP32-S2-MINI-2-N4
Espressif Systems · WiFi Modules · ESP32-S2-MINI-2
ESP32-S2-MINI-2-N4 from Espressif Systems, in a ESP32-S2-MINI-2. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from Espressif's KiCad libraries (CC-BY-SA 4.0); the 3D model is Espressif Systems's.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin of the module. |
| 2 | GND | power_in | Ground reference pin of the module. |
| 3 | 3V3 | power_in | Power supply pin for the module. |
| 4 | IO0 | bidirectional | RTC_GPIO0 / GPIO0 general-purpose I/O, also a chip boot mode strapping pin with weak pull-up default. |
| 5 | IO1 | bidirectional | RTC_GPIO1 / GPIO1 general-purpose I/O with TOUCH1 and ADC1_CH0 functions. |
| 6 | IO2 | bidirectional | RTC_GPIO2 / GPIO2 general-purpose I/O with TOUCH2 and ADC1_CH1 functions. |
| 7 | IO3 | bidirectional | RTC_GPIO3 / GPIO3 general-purpose I/O with TOUCH3 and ADC1_CH2 functions. |
| 8 | IO4 | bidirectional | RTC_GPIO4 / GPIO4 general-purpose I/O with TOUCH4 and ADC1_CH3 functions. |
| 9 | IO5 | bidirectional | RTC_GPIO5 / GPIO5 general-purpose I/O with TOUCH5 and ADC1_CH4 functions. |
| 10 | IO6 | bidirectional | RTC_GPIO6 / GPIO6 general-purpose I/O with TOUCH6 and ADC1_CH5 functions. |
| 11 | IO7 | bidirectional | RTC_GPIO7 / GPIO7 general-purpose I/O with TOUCH7 and ADC1_CH6 functions. |
| 12 | IO8 | bidirectional | RTC_GPIO8 / GPIO8 general-purpose I/O with TOUCH8 and ADC1_CH7 functions. |
| 13 | IO9 | bidirectional | RTC_GPIO9 / GPIO9 general-purpose I/O with TOUCH9, ADC1_CH8 and FSPIHD functions. |
| 14 | IO10 | bidirectional | RTC_GPIO10 / GPIO10 general-purpose I/O with TOUCH10, ADC1_CH9, FSPICS0 and FSPIIO4 functions. |
| 15 | IO11 | bidirectional | RTC_GPIO11 / GPIO11 general-purpose I/O with TOUCH11, ADC2_CH0, FSPID and FSPIIO5 functions. |
| 16 | IO12 | bidirectional | RTC_GPIO12 / GPIO12 general-purpose I/O with TOUCH12, ADC2_CH1, FSPICLK and FSPIIO6 functions. |
| 17 | IO13 | bidirectional | RTC_GPIO13 / GPIO13 general-purpose I/O with TOUCH13, ADC2_CH2, FSPIQ and FSPIIO7 functions. |
| 18 | IO14 | bidirectional | RTC_GPIO14 / GPIO14 general-purpose I/O with TOUCH14, ADC2_CH3, FSPIWP and FSPIDQS functions. |
| 19 | IO15 | bidirectional | RTC_GPIO15 / GPIO15 general-purpose I/O with U0RTS, ADC2_CH4 and XTAL_32K_P functions. |
| 20 | IO16 | bidirectional | RTC_GPIO16 / GPIO16 general-purpose I/O with U0CTS, ADC2_CH5 and XTAL_32K_N functions. |
| 21 | IO17 | bidirectional | RTC_GPIO17 / GPIO17 general-purpose I/O with U1TXD, ADC2_CH6 and DAC_1 functions. |
| 22 | IO18 | bidirectional | RTC_GPIO18 / GPIO18 general-purpose I/O with U1RXD, ADC2_CH7, DAC_2 and CLK_OUT3 functions. |
| 23 | IO19 | bidirectional | RTC_GPIO19 / GPIO19 general-purpose I/O with U1RTS, ADC2_CH8, CLK_OUT2 and USB_D- functions. |
| 24 | IO20 | bidirectional | RTC_GPIO20 / GPIO20 general-purpose I/O with U1CTS, ADC2_CH9, CLK_OUT1 and USB_D+ functions. |
| 25 | IO21 | bidirectional | RTC_GPIO21 / GPIO21 general-purpose I/O pin. |
| 26 | IO26 | bidirectional | SPICS1 / GPIO26 pin; used by the embedded PSRAM on N4R2 variants and not available for other use there. |
| 27 | NC | unconnected | Not connected pin. |
| 28 | IO33 | bidirectional | SPIIO4 / GPIO33 general-purpose I/O with FSPIHD function. |
| 29 | IO34 | bidirectional | SPIIO5 / GPIO34 general-purpose I/O with FSPICS0 function. |
| 30 | GND | power_in | Ground reference pin of the module. |
| 31 | IO35 | bidirectional | SPIIO6 / GPIO35 general-purpose I/O with FSPID function. |
| 32 | IO36 | bidirectional | SPIIO7 / GPIO36 general-purpose I/O with FSPICLK function. |
| 33 | IO37 | bidirectional | SPIDQS / GPIO37 general-purpose I/O with FSPIQ function. |
| 34 | IO38 | bidirectional | GPIO38 general-purpose I/O with FSPIWP function. |
| 35 | IO39 | bidirectional | MTCK / GPIO39 general-purpose I/O with CLK_OUT3 function. |
| 36 | IO40 | bidirectional | MTDO / GPIO40 general-purpose I/O with CLK_OUT2 function. |
| 37 | IO41 | bidirectional | MTDI / GPIO41 general-purpose I/O with CLK_OUT1 function. |
| 38 | IO42 | bidirectional | MTMS / GPIO42 general-purpose I/O pin. |
| 39 | TXD0 | bidirectional | U0TXD / GPIO43 UART0 transmit pin, also with CLK_OUT1 function. |
| 40 | RXD0 | bidirectional | U0RXD / GPIO44 UART0 receive pin, also with CLK_OUT2 function. |
| 41 | IO45 | bidirectional | GPIO45 general-purpose I/O, also a VDD_SPI voltage strapping pin with weak pull-down default. |
| 42 | GND | power_in | Ground reference pin of the module. |
| 43 | GND | power_in | Ground reference pin of the module. |
| 44 | IO46 | input | GPIO46 input-only pin, also a strapping pin with weak pull-down default. |
| 45 | EN | input | Chip enable: High turns the chip on; Low turns it off. Do not leave this pin floating. |
| 46 | GND | power_in | Ground reference pin of the module. |
| 47 | GND | power_in | Ground reference pin of the module. |
| 48 | GND | power_in | Ground reference pin of the module. |
| 49 | GND | power_in | Ground reference pin of the module. |
| 50 | GND | power_in | Ground reference pin of the module. |
| 51 | GND | power_in | Ground reference pin of the module. |
| 52 | GND | power_in | Ground reference pin of the module. |
| 53 | GND | power_in | Ground reference pin of the module. |
| 54 | GND | power_in | Ground reference pin of the module. |
| 55 | GND | power_in | Ground reference pin of the module. |
| 56 | GND | power_in | Ground reference pin of the module. |
| 57 | GND | power_in | Ground reference pin of the module. |
| 58 | GND | power_in | Ground reference pin of the module. |
| 59 | GND | power_in | Ground reference pin of the module. |
| 60 | GND | power_in | Ground reference pin of the module. |
| 61 | GND | power_in | Ground pin (EPAD); soldering it to base-board ground is optional but can optimize thermal performance. |
| 62 | GND | power_in | Ground reference pin of the module. |
| 63 | GND | power_in | Ground reference pin of the module. |
| 64 | GND | power_in | Ground reference pin of the module. |
| 65 | GND | power_in | Ground reference pin of the module. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Espressif Systems |
| Package | ESP32-S2-MINI-2 |
| Category | IoT/Communication Modules |
| Pins | 65 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VDD33 | -0.3 | 3.6 | V | 17 | ||
| Storage temperature | TSTORE | -40 | 105 | °C | 17 | ||
| Power supply voltage | VDD33 | 3 | 3.3 | 3.6 | V | 17 | |
| Current delivered by external power supply | IVDD | 0.5 | A | 17 | |||
| Operating ambient temperature (85 °C version) | TA | -40 | 85 | °C | 85 °C version | 17 | |
| Low-level input voltage | VIL | -0.3 | 0.25 | V | Max 0.25 × VDD | 17 | |
| High-level input current | IIH | 50 | nA | 17 | |||
| Low-level input current | IIL | 50 | nA | 17 | |||
| High-level output voltage | VOH | 0.8 | V | Min 0.8 × VDD; measured using high-impedance load | 17 | ||
| Low-level output voltage | VOL | 0.25 | V | Max 0.1 × VDD; measured using high-impedance load | 17 | ||
| Chip reset voltage | VIL_nRST | -0.3 | 0.25 | V | CHIP_PU voltage within the specified range; max 0.25 × VDD | 18 | |
| Time for power rails to stabilize before CHIP_PU is pulled high | tST BL | 50 | µs | 16 | |||
| Time for CHIP_PU to stay below VIL_nRST to reset the chip | tRST | 50 | µs | 16 | |||
| Flash power supply voltage (1.8 V) | VCC | 1.65 | 1.8 | 2 | V | 19 | |
| Flash power supply voltage (3.3 V) | VCC | 2.7 | 3.3 | 3.6 | V | 20 | |
| Flash maximum clock frequency | FC | 80 | MHz | 20 | |||
| Flash program/erase cycles | 100000 | cycles | 20 | ||||
| Flash data retention time | TRET | 20 | years | 20 | |||
| Flash page program time | TPP | 0.8 | 5 | ms | 20 | ||
| Flash sector erase time (4 KB) | TSE | 70 | 500 | ms | 20 | ||
| Flash block erase time (32 KB) | TBE1 | 0.2 | 2 | s | 20 | ||
| Flash block erase time (64 KB) | TBE2 | 0.3 | 3 | s | 20 | ||
| Flash chip erase time (32 Mb) | TCE | 20 | 60 | s | Chip erase time (32 Mb) | 20 | |
| Crystal Y1 frequency tolerance (40 MHz) | -10 | 10 | ppm | Y1 40MHz(±10ppm) in module schematic | 24 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | THERMOPLASTIC | HOUSING MATERIAL: THERMOPLASTIC, WHITE, UL 94V-0; | 29 | |
| contacts | COPPER ALLOY | gold | CONTACT MATERIAL: COPPER ALLOY, GOLD PLATED ALL OVER; | 29 |
| shell | COPPER ALLOY | gold | SHELL MATERIAL: COPPER ALLOY, GOLD PLATED ALL OVER; | 29 |
CAD (land: Espressif; 3D: manufacturer)
- Symbol:
ESP32-S2-MINI-2-N4 - Footprint:
PCM_Espressif:ESP32-S2-MINI-2 - 3D model: ESP32-S2-MINI-2 (Espressif KiCad libraries, STEP)
- 3D model files:
esp32-s2-mini-2-n4-etched.step/esp32-s2-mini-2-n4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);esp32-s2-mini-2-n4.step/esp32-s2-mini-2-n4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Espressif Systems datasheet (39 pp, sha256
11c07701d5906a78, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: land: Espressif's KiCad libraries (CC-BY-SA 4.0); 3D: Espressif Systems's model.