Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MPQ7221GRE-AEC1-Z

Monolithic Power Systems · LED Drivers · QFN-24(4x4)

MPQ7221GRE-AEC1-Z from Monolithic Power Systems, in a QFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RFSH/FLT output Outputs a synchronized refresh signal set via the FRFSH register when FLTEN = 0, or a fault indicator pulled low when a fault is triggered when FLTEN = 1.
2 EN input Enable control: pull low to disable the IC and high to enable it.
3 SCL input I2C interface clock input.
4 SDA bidirectional I2C interface data pin (described in the datasheet as the I2C data input).
5 ADDR passive I2C address setting via a resistor (RADDR) to GND, using the four LSBs of the address, with 10 different addresses configurable.
6 ISET passive LED current setting: connect a current-setting resistor from ISET to ground to configure the current in each LED string.
7 LED1 input LED channel 1 current input; connect the LED channel 1 cathode to this pin.
8 LED2 input LED channel 2 current input; connect the LED channel 2 cathode to this pin.
9 LED3 input LED channel 3 current input; connect the LED channel 3 cathode to this pin.
10 LED4 input LED channel 4 current input; connect the LED channel 4 cathode to this pin.
11 LED5 input LED channel 5 current input; connect the LED channel 5 cathode to this pin.
12 LED6 input LED channel 6 current input; connect the LED channel 6 cathode to this pin.
13 LED7 input LED channel 7 current input; connect the LED channel 7 cathode to this pin.
14 GND power_in Ground.
15 LED8 input LED channel 8 current input; connect the LED channel 8 cathode to this pin.
16 LED9 input LED channel 9 current input; connect the LED channel 9 cathode to this pin.
17 LED10 input LED channel 10 current input; connect the LED channel 10 cathode to this pin.
18 LED11 input LED channel 11 current input; connect the LED channel 11 cathode to this pin.
19 LED12 input LED channel 12 current input; connect the LED channel 12 cathode to this pin.
20 LED13 input LED channel 13 current input; connect the LED channel 13 cathode to this pin.
21 LED14 input LED channel 14 current input; connect the LED channel 14 cathode to this pin.
22 LED15 input LED channel 15 current input; connect the LED channel 15 cathode to this pin.
23 LED16 input LED channel 16 current input; connect the LED channel 16 cathode to this pin.
24 VIN power_in Power supply input for the IC (4.5V to 16V recommended operating range), which must be locally bypassed.
25 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package QFN-24(4x4)
Category Nixie Tube Driver/LED Driver
Pins 25

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range VIN 4.5 16 V 6
Input UVLO threshold rising VIN_UVLO 3.6 3.8 4.2 V Rising edge 6
Input UVLO threshold falling VIN_UVLO 3.3 3.5 3.7 V Falling edge 6
RFSH/FLT output frequency fRFSH/FLT 285 300 315 Hz FRFSH[9:0] = 0x1A9, FPWM[2:0] = 01 6
ISET voltage VISET 1.176 1.2 1.224 V TJ = 25°C 6
LED current (50mA) ILED -5 50 5 % RISET = 24kΩ, ICHx[5:0] = 0x3F (typ in mA) 6
LED current (50mA), 25°C ILED -3 50 3 % RISET = 24kΩ, ICHx[5:0] = 0x3F, TJ = 25°C (typ in mA) 6
LED current (80mA) ILED -5 80 5 % RISET = 15kΩ, ICHx[5:0] = 0x3F (typ in mA) 6
LED current (80mA), 25°C ILED -3 80 3 % RISET = 15kΩ, ICHx[5:0] = 0x3F, TJ = 25°C (typ in mA) 6
Current sink headroom VLEDx 200 300 mV ILED = 50mA 6
Current sink headroom VLEDx 350 450 mV ILED = 80mA 6
PWM frequency fPWM 240 250 260 Hz 6
LED short-string protection threshold VSLP 2.85 3 3.15 V STH[1:0] = 01 6
LED open-string protection threshold VLED_UV 100 150 mV 7
Input logic low VIL 0 0.4 V 7
Input logic high VIH 1.3 V printed as 1.3V 7
Output logic low VOL 0.4 V ILOAD = 3mA 7
SCL clock frequency fSCL 1200 kHz 7
SCL high time tHIGH 0.32 μs 7
SCL low time tLOW 0.12 μs 7
Data set-up time tSU_DAT 10 ns 7
Data hold time tHD_DAT 0 0.15 μs 7
Set-up time repeated start tSU_STA 0.16 μs 7
Hold time start condition tHD_STA 0.16 μs 7
Set-up time stop condition tSU_STO 0.16 μs 7
SCL rising time after repeated start and ACK tR_CL1 20 160 ns 7
SCL rising time tR_CL 20 80 ns 7
SCL falling time tF_CL 20 80 ns 7
SDA rising time tR_DA 20 160 ns 7
SDA falling time tF_DA 20 160 ns 7
Pulse width of suppressed spike tSP 0 10 ns 7
Capacitance bus for each bus line CB 400 pF 7
Quiescent supply current IQ 5 mA 6
Shutdown supply current ISD 2 μA VEN = 0V, VIN = 16V 6
EN rising threshold VEN_ON 2.1 V EN rising 6
EN falling threshold VEN_OFF 0.8 V EN falling 6
EN pull-down resistor REN 1 MΩ 6
RFSH/FLT pull-down resistor 100 Ω FLTEN = 1, fault triggered 6
PWM duty step tPWM 1 μs 12-bit resolution, fPWM = 250Hz 6
Phase shift tDELAY 40 μs PS_EN = 1 6
ILED step 1.25 mA ILED = 80mA, analog dimming step 6
ILED slew rate in PWM dimming 5 μs SLEW[2:0] = 01, rising edge 6
ILED slew rate in PWM dimming 20 μs SLEW[1:0] = 11, rising edge 6
LED short-string protection time tSLP 4 ms VLEDx > STH 6
LED short-string protection hiccup time tSLP_HICCUP 1 ms 6
LED short-string hiccup detection time VSLP_DET 32 μs 7
LED open-string protection time tLEDO 4 ms VLEDx < 100mV 7
LED open-string protection hiccup time tSLP_HICCUP 1 ms 7
LED open-string hiccup detection time VSLP_DET 32 μs 7
Thermal shutdown threshold TST 170 °C Derived from bench characterization, not tested in production 7
Thermal shutdown hysteresis TST_HYS 20 °C Derived from bench characterization, not tested in production 7
VIN supply voltage (abs max) VIN -0.3 22 V 5
LED pin voltage (abs max) VLED1 to VLED16 -0.5 22 V 5
All other pins (abs max) -0.3 5 V 5
Junction temperature TJ 150 °C 5
Lead temperature 260 °C 5
Supply voltage (recommended) VIN 4.5 16 V 5
Operating junction temperature TJ -40 125 °C 5
Thermal resistance junction-case θJC 9 °C/W JESD51-7, QFN-24 (4mmx4mm) 5

CAD (KiCad official)

  • Symbol: MPQ7221GRE-AEC1-Z
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
  • 3D model: QFN-24(4x4) (KiCad packages3D, STEP)
  • 3D model files: mpq7221gre-aec1-z-etched.step / mpq7221gre-aec1-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mpq7221gre-aec1-z.step / mpq7221gre-aec1-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (38 pp, sha256 b64f1a82e34d637b, retrieved 2026-10-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF