3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTM32L412KBU3
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · UFQFPN-32(5x5)
STM32L412KBU3 from STMicroelectronics, in a UFQFPN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Standard operating supply pin, 1.71 V to 3.6 V per the general operating conditions. |
| 2 | PC14-OSC32_IN | bidirectional | FT I/O (5 V tolerant) that doubles as OSC32_IN for the 32 kHz LSE crystal, with EVENTOUT as an alternate function. |
| 3 | PC15-OSC32_OUT | bidirectional | FT I/O (5 V tolerant) that doubles as OSC32_OUT for the 32 kHz LSE crystal, with EVENTOUT as an alternate function. |
| 4 | NRST | bidirectional | Bidirectional reset pin with an embedded weak pull-up resistor. |
| 5 | VDDA/VREF+ | power_in | Analog supply pin that also serves as the VREF+ input; VDDA is 1.62 V to 3.6 V when the ADC or COMP is used. |
| 6 | PA0-CK_IN | bidirectional | FT_a I/O (5 V tolerant) with OPAMP1_VINP, COMP1_INM and ADC1_IN5 analog functions, and TIM2_CH1, USART2_CTS, COMP1_OUT, TIM2_ETR and CK_IN digital functions. |
| 7 | PA1 | bidirectional | FT_a I/O (5 V tolerant) with OPAMP1_VINM, COMP1_INP and ADC1_IN6 analog functions, and TIM2_CH2, I2C1_SMBA, SPI1_SCK, USART2_RTS_DE and TIM15_CH1N digital functions. |
| 8 | PA2 | bidirectional | FT_a I/O (5 V tolerant) with ADC12_IN7 and WKUP4/LSCO functions, and TIM2_CH3, USART2_TX, LPUART1_TX, QUADSPI_BK1_NCS and TIM15_CH1 digital functions. |
| 9 | PA3 | bidirectional | TT_a I/O (3.6 V tolerant) with OPAMP1_VOUT and ADC12_IN8 analog functions, and TIM2_CH4, USART2_RX, LPUART1_RX, QUADSPI_CLK and TIM15_CH2 digital functions. |
| 10 | PA4 | bidirectional | TT_a I/O (3.6 V tolerant) with COMP1_INM and ADC12_IN9 analog functions, and SPI1_NSS, USART2_CK and LPTIM2_OUT digital functions. |
| 11 | PA5 | bidirectional | TT_a I/O (3.6 V tolerant) with COMP1_INM and ADC12_IN10 analog functions, and TIM2_CH1, TIM2_ETR, SPI1_SCK and LPTIM2_ETR digital functions. |
| 12 | PA6 | bidirectional | FT_a I/O (5 V tolerant) with ADC12_IN11 analog function, and TIM1_BKIN, SPI1_MISO, COMP1_OUT, USART3_CTS, LPUART1_CTS, QUADSPI_BK1_IO3 and TIM16_CH1 digital functions. |
| 13 | PA7 | bidirectional | FT_fa I/O (5 V tolerant, Fm+ capable) with ADC12_IN12 analog function, and TIM1_CH1N, I2C3_SCL, SPI1_MOSI and QUADSPI_BK1_IO2 digital functions. |
| 14 | PB0 | bidirectional | FT_a I/O (5 V tolerant) with ADC12_IN15 analog function, and TRACED0, TIM1_CH2N, SPI1_NSS, USART3_CK, QUADSPI_BK1_IO1 and COMP1_OUT digital functions. |
| 15 | PB1 | bidirectional | FT_a I/O (5 V tolerant) with COMP1_INM and ADC12_IN16 analog functions, and TRACED1, TIM1_CH3N, USART3_RTS_DE, LPUART1_RTS_DE, QUADSPI_BK1_IO0 and LPTIM2_IN1 digital functions. |
| 16 | VSS | power_in | Ground pin for the digital supply domain. |
| 17 | VDD | power_in | Standard operating supply pin, 1.71 V to 3.6 V per the general operating conditions. |
| 18 | PA8 | bidirectional | FT I/O (5 V tolerant) with MCO, TIM1_CH1, USART1_CK, LPTIM2_OUT and EVENTOUT alternate functions. |
| 19 | PA9 | bidirectional | FT_f I/O (5 V tolerant, Fm+ capable) with TIM1_CH2, I2C1_SCL, USART1_TX, TIM15_BKIN and EVENTOUT alternate functions. |
| 20 | PA10 | bidirectional | FT_f I/O (5 V tolerant, Fm+ capable) with TIM1_CH3, I2C1_SDA, USART1_RX, USB_CRS_SYNC and EVENTOUT alternate functions. |
| 21 | PA11 | bidirectional | FT_u I/O (5 V tolerant) with USB function supplied by VDDUSB, and TIM1_CH4, TIM1_BKIN2, SPI1_MISO, COMP1_OUT, USART1_CTS and USB_DM digital functions. |
| 22 | PA12 | bidirectional | FT_u I/O (5 V tolerant) with USB function supplied by VDDUSB, and TIM1_ETR, SPI1_MOSI, USART1_RTS_DE and USB_DP digital functions. |
| 23 | PA13 | bidirectional | FT I/O (5 V tolerant) that carries the JTMS/SWDIO debug function, with IR_OUT, USB_NOE and EVENTOUT alternate functions. |
| 24 | PA14 | bidirectional | FT I/O (5 V tolerant) that carries the JTCK/SWCLK debug function, with LPTIM1_OUT, I2C1_SMBA and EVENTOUT alternate functions. |
| 25 | PA15 | bidirectional | FT I/O (5 V tolerant) that carries the JTDI debug function, with TIM2_CH1, TIM2_ETR, USART2_RX, SPI1_NSS, USART3_RTS_DE, TSC_G3_IO1 and EVENTOUT alternate functions. |
| 26 | PB3 | bidirectional | FT_a I/O (5 V tolerant) that carries the JTDO/TRACESWO function, with TIM2_CH2, SPI1_SCK, USART1_RTS_DE and EVENTOUT alternate functions. |
| 27 | PB4 | bidirectional | FT_fa I/O (5 V tolerant, Fm+ capable) that carries the NJTRST function, with I2C3_SDA, SPI1_MISO, USART1_CTS, TSC_G2_IO1 and EVENTOUT alternate functions. |
| 28 | PB5 | bidirectional | FT I/O (5 V tolerant) with TRACED2, LPTIM1_IN1, I2C1_SMBA, SPI1_MOSI, USART1_CK, TSC_G2_IO2, TIM16_BKIN and EVENTOUT alternate functions. |
| 29 | PB6 | bidirectional | FT_fa I/O (5 V tolerant, Fm+ capable) with TRACED3, LPTIM1_ETR, I2C1_SCL, USART1_TX, TSC_G2_IO3, TIM16_CH1N and EVENTOUT alternate functions. |
| 30 | PB7 | bidirectional | FT_fa I/O (5 V tolerant, Fm+ capable) with PVD_IN additional function, and TRACECK, LPTIM1_IN2, I2C1_SDA, USART1_RX, TSC_G2_IO4 and EVENTOUT alternate functions. |
| 31 | PH3-BOOT0 | bidirectional | FT I/O (5 V tolerant) that carries the BOOT0 boot-configuration function, with EVENTOUT as an alternate function. |
| 32 | VSS | power_in | Ground pin for the digital supply domain. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-32(5x5) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDD | VDD | 1.71 | 3.6 | V | 78 | ||
| Analog supply VDDA | VDDA | 1.62 | V | ADC or COMP used | 78 | ||
| Analog supply VDDA | VDDA | 1.8 | 3.6 | V | OPAMP used | 78 | |
| Standard operating voltage VDD12 (external SMPS) | VDD12 | 1.08 | 1.32 | V | Full frequency range | 78 | |
| Standard operating voltage VDD12 (external SMPS) | VDD12 | 1 | 1.32 | V | Up to 26 MHz | 78 | |
| Backup operating voltage VBAT | VBAT | 1.55 | 3.6 | V | 78 | ||
| USB supply voltage VDDUSB | VDDUSB | 3 | 3.6 | V | USB used | 78 | |
| Internal AHB clock frequency fHCLK | fHCLK | 0 | 80 | MHz | 78 | ||
| Ambient temperature TA (suffix 6, maximum power dissipation) | TA | -40 | 85 | °C | Suffix 6 version, maximum power dissipation | 79 | |
| Ambient temperature TA (suffix 6, low-power dissipation) | TA | -40 | 105 | °C | Suffix 6 version, low-power dissipation | 79 | |
| Ambient temperature TA (suffix 3, maximum power dissipation) | TA | -40 | 125 | °C | Suffix 3 version, maximum power dissipation | 79 | |
| Ambient temperature TA (suffix 3, low-power dissipation) | TA | -40 | 130 | °C | Suffix 3 version, low-power dissipation | 79 | |
| Junction temperature range TJ | TJ | -40 | 105 | °C | Suffix 6 version | 79 | |
| Junction temperature range TJ | TJ | -40 | 130 | °C | Suffix 3 version | 79 | |
| Power dissipation PD, UFQFPN32 | PD | 541 | mW | TA = 85 °C for suffix 6 | 78 | ||
| Power dissipation PD, UFQFPN32 | PD | 135 | mW | TA = 125 °C for suffix 3 | 78 | ||
| External main supply voltage (VDD, VDDA, VDDUSB, VBAT) | VDDX - VSS | -0.3 | 4 | V | 75 | ||
| External SMPS supply voltage | VDD12 - VSS | -0.3 | 1.32 | V | 75 | ||
| Input voltage on TT_xx pins | VIN | -0.3 | 4 | V | 75 | ||
| Input voltage on any other pins | VIN | -0.3 | 4 | V | 75 | ||
| Total current into sum of all VDD power lines (source) | ∑IVDD | 140 | mA | 76 | |||
| Total current out of sum of all VSS ground lines (sink) | ∑IVSS | 140 | mA | 76 | |||
| Maximum current into each VDD power pin (source) | IVDD(PIN) | 100 | mA | 76 | |||
| Maximum current out of each VSS ground pin (sink) | IVSS(PIN) | 100 | mA | 76 | |||
| Output current sunk by any I/O and control pin | IIO(PIN) | 20 | mA | Except FT_f | 76 | ||
| Output current sourced by any I/O and control pin | IIO(PIN) | 20 | mA | Sourced | 76 | ||
| Total output current sunk by sum of all I/Os and control pins | ∑IIO(PIN) | 100 | mA | Sunk | 76 | ||
| Total output current sourced by sum of all I/Os and control pins | ∑IIO(PIN) | 100 | mA | Sourced | 76 | ||
| Total injected current (sum of all I/Os and control pins) | ∑/IINJ(PIN)/ | 25 | mA | 76 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 77 | ||
| Maximum junction temperature | TJ | 150 | °C | 77 | |||
| Brown-out reset threshold 0 (VBOR0) | VBOR0 | 1.62 | 1.66 | 1.7 | V | Rising edge | 79 |
| Brown-out reset threshold 0 (VBOR0) | VBOR0 | 1.6 | 1.64 | 1.69 | V | Falling edge | 79 |
| Reset temporization after BOR0 is detected | tRSTTEMPO | 250 | 400 | μs | VDD rising | 79 | |
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | -40 °C < TA < +130 °C | 82 |
| Internal reference voltage spread over the temperature range | ∆VREFINT | 5 | 7.5 | mV | VDD = 3 V | 82 | |
| Temperature coefficient | TCoeff | 30 | 50 | ppm/°C | -40°C < TA < +130°C | 82 | |
| Voltage coefficient | VDDCoeff | 250 | 1200 | ppm/V | 3.0 V < VDD < 3.6 V | 82 | |
| Supply current in Run mode | IDD_ALL (Run) | 7.3 | 7.75 | mA | Range 1, fHCLK = 80 MHz, 25 °C, all peripherals disable | 85 | |
| Supply current in Stop 2 mode, RTC disabled | IDD_ALL (Stop 2) | 0.79 | 2 | µA | VDD = 3 V, 25 °C | 98 | |
| Supply current in Standby mode, RTC disabled | IDD_ALL (Standby) | 120 | 215 | nA | No independent watchdog, VDD = 3 V, 25 °C | 103 | |
| Supply current in Shutdown mode, RTC disabled | IDD_ALL (Shutdown) | 31 | 97 | nA | VDD = 3 V, 25 °C | 106 | |
| Backup domain supply current, RTC disabled | IDD_VBAT (VBAT) | 5 | nA | VBAT = 3 V, 25 °C | 107 |
CAD (KiCad official)
- Symbol:
STM32L412KBU3 - Footprint:
Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm - 3D model: UFQFPN-32(5x5) (KiCad packages3D, STEP)
- 3D model files:
stm32l412kbu3-etched.step/stm32l412kbu3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l412kbu3.step/stm32l412kbu3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (192 pp, sha256
469ab19caba48d70, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).