Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SC92F8482X20U

SOC(Shenzhen SinOne Microelectronics) · Microcontrollers (MCU/MPU/SOC) · TSSOP-20

SC92F8482X20U from SOC(Shenzhen SinOne Microelectronics), in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive supply pin; the recommended operating voltage is 2.0 V to 5.5 V and the absolute maximum on VDD/VSS is -0.3 V to 5.5 V.
2 P1.0/CMOD bidirectional General-purpose I/O P1.0, which is also the CMOD pin for the external touch-key capacitor.
3 VSS power_in Ground reference pin; the datasheet rates the current through VSS at 200 mA maximum.
4 P1.1/INT01/TK22/RST bidirectional General-purpose I/O P1.1, also external interrupt INT01, touch channel TK22, and the external reset input RST when the Customer Option selects it as reset (RST is a Schmitt-trigger input with VIH min 0.8VDD).
5 P1.2/INT02/T0/RX0/TK21/tCK bidirectional General-purpose I/O P1.2, also INT02, Timer0 external count input T0, UART0 receive RX0, touch channel TK21, and the tCK programming/emulation clock; the datasheet advises avoiding TK21 if touch debug is used.
6 P1.3/INT03/T1/TX0/TK20/tDIO bidirectional General-purpose I/O P1.3, also INT03, Timer1 external count input T1, UART0 transmit TX0, touch channel TK20, and the tDIO programming/emulation data line; the datasheet advises avoiding TK20 if touch debug is used.
7 P1.4/INT10/AIN9/TK19 bidirectional General-purpose I/O P1.4, also external interrupt INT10, ADC input AIN9, and touch channel TK19.
8 P1.5/INT11/AIN8/TK18 bidirectional General-purpose I/O P1.5, also external interrupt INT11, ADC input AIN8, and touch channel TK18.
9 P2.7/PWM5/AIN5/TK15 bidirectional General-purpose I/O P2.7, also PWM5 output, ADC input AIN5, and touch channel TK15.
10 P2.6/PWM4/AIN4/TK14 bidirectional General-purpose I/O P2.6, also PWM4 output, ADC input AIN4, and touch channel TK14.
11 P2.5/PWM3/AIN3/TK13 bidirectional General-purpose I/O P2.5, also PWM3 output, ADC input AIN3, and touch channel TK13.
12 P2.4/AIN2/TK12 bidirectional General-purpose I/O P2.4, also ADC input AIN2 and touch channel TK12.
13 P2.1/INT25/MISO/RX1/TK9 bidirectional General-purpose I/O P2.1, also external interrupt INT25, SPI MISO, UART1 receive RX1, and touch channel TK9.
14 P2.0/INT24/MOSI/TX1/SDA/TK8 bidirectional General-purpose I/O P2.0, also external interrupt INT24, SPI MOSI, UART1 transmit TX1, TWI SDA, and touch channel TK8.
15 P0.5/INT21/SCK/TK5 bidirectional General-purpose I/O P0.5, also external interrupt INT21, SPI/TWI clock SCK, and touch channel TK5.
16 P0.4/INT20/COM4/TK4 bidirectional General-purpose I/O P0.4, also external interrupt INT20, software LCD common output COM4, and touch channel TK4.
17 P0.3/COM3/TK3 bidirectional General-purpose I/O P0.3, also software LCD common output COM3 and touch channel TK3.
18 P0.2/PWM2/COM2/TK2 bidirectional General-purpose I/O P0.2, also PWM2 output, software LCD common output COM2, and touch channel TK2.
19 P0.1/PWM1/COM1/TK1 bidirectional General-purpose I/O P0.1, also PWM1 output, software LCD common output COM1, and touch channel TK1.
20 P0.0/PWM0/COM0/TK0 bidirectional General-purpose I/O P0.0, also PWM0 output, software LCD common output COM0, and touch channel TK0.

Key specifications

Parameter Value
Manufacturer SOC(Shenzhen SinOne Microelectronics)
Package TSSOP-20
Category Embedded Processors & Controllers
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD/VSS DC supply voltage (absolute maximum) VDD/VSS -0.3 5.5 V 99
Voltage on any pin (absolute maximum) -0.3 V Max printed as VDD+0.3 V; not a numeric value 99
Operating ambient temperature (absolute maximum) TA -40 105 ℃ 工作环境温度 99
Storage temperature (absolute maximum) TSTG -55 125 ℃ 储存温度 99
Current through VDD (absolute maximum) IVDD 200 mA 流过 VDD 的电流值 99
Current through VSS (absolute maximum) IVSS 200 mA 流过 VSS 的电流值 99
Operating supply voltage (recommended) VDD 2 5.5 V 系统时钟频率 32MHz 99
Operating ambient temperature (recommended) TA -40 105 ℃ 99
Flash erase/write endurance NEND 100000 Cycles 99
Flash data retention time TDR 100 Years TA = +25℃ 99
Power-down mode standby current (VDD=5V) Ipd1 2.5 6 μA 99
Base Timer operating current (VDD=5V) IBTM 1.3 3 μA BTMFS[3:0]=1000; interrupt every 4.0 s 99
WDT current (VDD=5V) IWDT 1.3 3 μA WDTCKS[2:0]=000; WDT overflow time 500ms 99
High-sensitivity touch key operating current (VDD=5V) ITK1 0.8 1.2 mA 99
Input low voltage (VDD=5V) VIL1 -0.3 V Max printed as 0.3VDD; not a numeric value 100
Schmitt input low voltage (VDD=5V) VIL2 -0.2 V Schmitt trigger inputs: RST, tCK/tDIO, UART0 RX0, SSI inputs, INT0~2, PWM fault FLT, Timer clock and capture inputs; max printed as 0.2VDD 100
Power-down mode standby current (VDD=3.3V) Ipd2 2.5 6 μA 100
High-sensitivity touch key operating current (VDD=3.3V) ITK2 0.8 1.2 mA 100
Input low voltage (VDD=3.3V) VIL3 -0.3 V Max printed as 0.3VDD; not a numeric value 100
Schmitt input low voltage (VDD=3.3V) VIL4 -0.2 V Schmitt trigger inputs: RST, tCK/tDIO, UART0 RX0, SSI inputs, INT0~2, PWM fault FLT, Timer clock and capture inputs; max printed as 0.2VDD 100
Power-on/power-down wake-up time TPDW 65 130 μs 101
Reset pulse width TReset 18 μs 低电平有效 101
Internal RC oscillator frequency (fHRC) fHRC 31.36 32 32.64 MHz VDD=2.05.5V TA=-40105 ℃ 101
Internal reference 1 (1.024V) VREF1 1.004 1.024 1.044 V VDD = 5V 或 3.3V 101
ADC supply voltage 1 VAD1 2.7 5 5.5 V Vref = 2.4V 101
ADC supply voltage 2 VAD2 2 5 5.5 V Vref = 1.024V 或 Vref = VDD 101
Internal reference 2 (2.4V) VREF2 2.38 2.4 2.42 V 101
Internal reference 3 (2.048V) VREF3 2.028 2.048 2.068 V 101
ADC input resistance RAIN 1 M VIN=5V 101
ADC conversion current 1 IADC1 2 mA VDD=5V 101
ADC conversion current 2 IADC2 1.8 mA VDD=3.3V 101
Differential nonlinearity error (DNL) DNL -3 3 LSB VDD=5V; VREF=5V 101
Integral nonlinearity error (INL) INL -3 3 LSB VDD=5V; VREF=5V 101
ADC conversion time TADC 1.2 1.6 μs fHRC = 32MHz 101

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PBT BTM Base timer BTMIF EBTM IPBTM 004BH 10 9 H/W Auto 能 50

CAD (KiCad official)

  • Symbol: SC92F8482X20U
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: sc92f8482x20u-etched.step / sc92f8482x20u-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sc92f8482x20u.step / sc92f8482x20u.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SOC(Shenzhen SinOne Microelectronics) datasheet (113 pp, sha256 7114a89ea87c08d1, retrieved 2026-11-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF