component
74CBTLV3244PW
Public Made by Adomby adom
Nexperia Signal Switches, Multiplexers, Decoders, TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdown74CBTLV3244PW
Nexperia · Signal Switches, Multiplexers, Decoders · TSSOP-20
74CBTLV3244PW from Nexperia, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OE | input | Output enable input (active LOW) for switches 1A1 to 1B4; the switches are disabled (high-impedance) when this input is HIGH. |
| 2 | 1A1 | bidirectional | Data input/output (A port) of the 1A1 switch channel; ON-state resistance is about 5 Ω and rail-to-rail switching is supported when enabled. |
| 3 | 2B4 | bidirectional | Data input/output (B port) of the 2B4 switch channel; the channel is disabled when 2OE is HIGH. |
| 4 | 1A2 | bidirectional | Data input/output (A port) of the 1A2 switch channel; the channel is disabled when 1OE is HIGH. |
| 5 | 2B3 | bidirectional | Data input/output (B port) of the 2B3 switch channel; the channel is disabled when 2OE is HIGH. |
| 6 | 1A3 | bidirectional | Data input/output (A port) of the 1A3 switch channel; the channel is disabled when 1OE is HIGH. |
| 7 | 2B2 | bidirectional | Data input/output (B port) of the 2B2 switch channel; the channel is disabled when 2OE is HIGH. |
| 8 | 1A4 | bidirectional | Data input/output (A port) of the 1A4 switch channel; the channel is disabled when 1OE is HIGH. |
| 9 | 2B1 | bidirectional | Data input/output (B port) of the 2B1 switch channel; the channel is disabled when 2OE is HIGH. |
| 10 | GND | power_in | Ground (0 V); all voltages are referenced to this pin. |
| 11 | 2A1 | bidirectional | Data input/output (A port) of the 2A1 switch channel; the channel is disabled when 2OE is HIGH. |
| 12 | 1B4 | bidirectional | Data input/output (B port) of the 1B4 switch channel; the channel is disabled when 1OE is HIGH. |
| 13 | 2A2 | bidirectional | Data input/output (A port) of the 2A2 switch channel; the channel is disabled when 2OE is HIGH. |
| 14 | 1B3 | bidirectional | Data input/output (B port) of the 1B3 switch channel; the channel is disabled when 1OE is HIGH. |
| 15 | 2A3 | bidirectional | Data input/output (A port) of the 2A3 switch channel; the channel is disabled when 2OE is HIGH. |
| 16 | 1B2 | bidirectional | Data input/output (B port) of the 1B2 switch channel; the channel is disabled when 1OE is HIGH. |
| 17 | 2A4 | bidirectional | Data input/output (A port) of the 2A4 switch channel; the channel is disabled when 2OE is HIGH. |
| 18 | 1B1 | bidirectional | Data input/output (B port) of the 1B1 switch channel; the channel is disabled when 1OE is HIGH. |
| 19 | 2OE | input | Output enable input (active LOW) for switches 2A1 to 2B4; the switches are disabled (high-impedance) when this input is HIGH. |
| 20 | VCC | power_in | Positive supply voltage; recommended operating range is 2.3 V to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | TSSOP-20 |
| Category | Logic |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| supply voltage | VCC | -0.5 | 4.6 | V | 3 | ||
| input voltage | VI | -0.5 | 4.6 | V | 3 | ||
| switch voltage | VSW | -0.5 | V | enable and disable mode | 3 | ||
| input clamping current | IIK | -50 | mA | VI < -0.5 V | 3 | ||
| switch clamping current | ISK | -50 | mA | VI < -0.5 V | 3 | ||
| switch current | ISW | -128 | 128 | mA | VSW = 0 V to VCC | 3 | |
| supply current | ICC | 100 | mA | 3 | |||
| ground current | IGND | -100 | mA | 3 | |||
| storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| total power dissipation | Ptot | 500 | mW | Tamb = -40 °C to +125 °C | 3 | ||
| supply voltage | VCC | 2.3 | 3.6 | V | 4 | ||
| input voltage | VI | 0 | 3.6 | V | 4 | ||
| switch voltage | VSW | 0 | V | enable and disable mode | 4 | ||
| ambient temperature | Tamb | -40 | 125 | °C | 4 | ||
| input transition rise and fall rate | Δt/ΔV | 200 | ns/V | VCC = 2.3 V to 3.6 V; applies to control signal levels | 4 | ||
| HIGH-level input voltage | VIH | 1.7 | V | -40 °C to +125 °C; VCC = 2.3 V to 2.7 V | 4 | ||
| HIGH-level input voltage | VIH | 2 | V | -40 °C to +125 °C; VCC = 3.0 V to 3.6 V | 4 | ||
| LOW-level input voltage | VIL | 0.7 | V | -40 °C to +125 °C; VCC = 2.3 V to 2.7 V | 4 | ||
| LOW-level input voltage | VIL | 0.9 | V | -40 °C to +125 °C; VCC = 3.0 V to 3.6 V | 4 | ||
| input leakage current | II | -20 | 20 | μA | -40 °C to +125 °C; pin nOE; VI = GND to VCC; VCC = 3.6 V | 4 | |
| OFF-state leakage current | IS(OFF) | -20 | 20 | μA | -40 °C to +125 °C; VCC = 3.6 V; see Fig. 3 | 4 | |
| ON-state leakage current | IS(ON) | -20 | 20 | μA | -40 °C to +125 °C; VCC = 3.6 V; see Fig. 4 | 4 | |
| power-off leakage current | IOFF | -50 | 50 | μA | -40 °C to +125 °C; VI or VO = 0 V to 3.6 V; VCC = 0 V | 4 | |
| supply current | ICC | 50 | μA | -40 °C to +125 °C; VI = GND or VCC; IO = 0 A; VSW = GND or VCC; VCC = 3.6 V | 4 | ||
| additional supply current | ΔICC | 2000 | μA | -40 °C to +125 °C; pin nOE; VI = VCC - 0.6 V; VSW = GND or VCC; VCC = 3.6 V | 4 | ||
| ON resistance | RON | 4.2 | 15 | Ω | -40 °C to +125 °C; VCC = 2.3 V to 2.7 V; ISW = 64 mA; VI = 0 V | 5 | |
| ON resistance | RON | 8.4 | 60 | Ω | -40 °C to +125 °C; VCC = 2.3 V to 2.7 V; ISW = 15 mA; VI = 1.7 V | 5 | |
| ON resistance | RON | 4 | 11 | Ω | -40 °C to +125 °C; VCC = 3.0 V to 3.6 V; ISW = 64 mA; VI = 0 V | 5 | |
| ON resistance | RON | 6.2 | 25.5 | Ω | -40 °C to +125 °C; VCC = 3.0 V to 3.6 V; ISW = 15 mA; VI = 2.4 V | 5 | |
| propagation delay | tpd | 0.2 | ns | -40 °C to +125 °C; nAn to nBn or nBn to nAn; see Fig. 13; VCC = 2.3 V to 2.7 V | 8 | ||
| propagation delay | tpd | 0.31 | ns | -40 °C to +125 °C; nAn to nBn or nBn to nAn; see Fig. 13; VCC = 3.0 V to 3.6 V | 8 | ||
| enable time | ten | 1 | 3 | 7 | ns | -40 °C to +125 °C; nOE to nAn or nBn; see Fig. 12; VCC = 2.3 V to 2.7 V | 8 |
| enable time | ten | 1 | 2.6 | 6 | ns | -40 °C to +125 °C; nOE to nAn or nBn; see Fig. 12; VCC = 3.0 V to 3.6 V | 8 |
| disable time | tdis | 1 | 2.6 | 7.5 | ns | -40 °C to +125 °C; nOE to nAn or nBn; see Fig. 12; VCC = 2.3 V to 2.7 V | 8 |
| disable time | tdis | 1 | 3.2 | 7.5 | ns | -40 °C to +125 °C; nOE to nAn or nBn; see Fig. 12; VCC = 3.0 V to 3.6 V | 8 |
CAD (KiCad official)
- Symbol:
74CBTLV3244PW - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
74cbtlv3244pw-etched.step/74cbtlv3244pw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);74cbtlv3244pw.step/74cbtlv3244pw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (15 pp, sha256
51dc3103de54fe65, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).