3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC16F1718T-I/ML
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-28-EP(6x6)
PIC16F1718T-I from Microchip Tech, in a QFN-28-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA2 | bidirectional | Port A bit 2 general-purpose I/O with analog input AN2, voltage reference Vref- and DAC1OUT1 output. |
| 2 | RA3 | bidirectional | Port A bit 3 general-purpose I/O with analog input AN3 and voltage reference Vref+. |
| 3 | RA4 | bidirectional | Port A bit 4 general-purpose I/O with op amp 1 non-inverting input OPA1IN+ and Timer0 clock input T0CKI. |
| 4 | RA5 | bidirectional | Port A bit 5 general-purpose I/O with analog input AN4, op amp 1 inverting input OPA1IN-, DAC2OUT1 output and nSS input. |
| 5 | VSS | power_in | Ground reference for the device (one of two VSS pins on the 28-pin QFN). |
| 6 | RA7 | bidirectional | Port A bit 7 general-purpose I/O, also OSC1/CLKIN external oscillator or clock input and NCOCLK input. |
| 7 | RA6 | bidirectional | Port A bit 6 general-purpose I/O, also OSC2/CLKOUT oscillator output. |
| 8 | RC0 | bidirectional | Port C bit 0 general-purpose I/O with Timer1 clock input T1CKI and secondary oscillator output SOSCO. |
| 9 | RC1 | bidirectional | Port C bit 1 general-purpose I/O with secondary oscillator input SOSCI. |
| 10 | RC2 | bidirectional | Port C bit 2 general-purpose I/O with analog input AN14. |
| 11 | RC3 | bidirectional | Port C bit 3 general-purpose I/O with analog input AN15 and SPI/I2C clock SCK/SCL. |
| 12 | RC4 | bidirectional | Port C bit 4 general-purpose I/O with analog input AN16 and SPI data in/I2C data SDI/SDA. |
| 13 | RC5 | bidirectional | Port C bit 5 general-purpose I/O with analog input AN17. |
| 14 | RC6 | bidirectional | Port C bit 6 general-purpose I/O with analog input AN18. |
| 15 | RC7 | bidirectional | Port C bit 7 general-purpose I/O with analog input AN19. |
| 16 | VSS | power_in | Ground reference for the device (second VSS pin on the 28-pin QFN). |
| 17 | VDD | power_in | Positive supply; 2.3V to 5.5V for PIC16F170X/171X devices. |
| 18 | RB0 | bidirectional | Port B bit 0 general-purpose I/O with analog input AN12, zero-cross detect ZCD and external interrupt INT. |
| 19 | RB1 | bidirectional | Port B bit 1 general-purpose I/O with analog input AN10 and op amp 2 output OPA2OUT. |
| 20 | RB2 | bidirectional | Port B bit 2 general-purpose I/O with analog input AN8 and op amp 2 inverting input OPA2IN-. |
| 21 | RB3 | bidirectional | Port B bit 3 general-purpose I/O with analog input AN9 and op amp 2 non-inverting input OPA2IN+. |
| 22 | RB4 | bidirectional | Port B bit 4 general-purpose I/O with analog input AN11 and interrupt-on-change. |
| 23 | RB5 | bidirectional | Port B bit 5 general-purpose I/O with analog input AN13 and Timer1 gate input T1G. |
| 24 | RB6 | bidirectional | Port B bit 6 general-purpose I/O, also ICSPCLK in-circuit serial programming clock, with SCL and CLCIN2. |
| 25 | RB7 | bidirectional | Port B bit 7 general-purpose I/O, also ICSPDAT in-circuit serial programming data, with DAC1OUT2, DAC2OUT2 and CLCIN3. |
| 26 | RE3 | input | Input-only pin RE3 that functions as MCLR master clear reset and VPP programming voltage input. |
| 27 | RA0 | bidirectional | Port A bit 0 general-purpose I/O with analog input AN0 and CLCIN0. |
| 28 | RA1 | bidirectional | Port A bit 1 general-purpose I/O with analog input AN1, op amp 1 output OPA1OUT and CLCIN1. |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-28-EP(6x6) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 29 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range (PIC16F170X/171X) | VDD | 2.3 | 5.5 | V | PIC16F170X/171X | 1 | |
| Operating Temperature Range, Industrial | -40 | 85 | °C | Industrial | 1 | ||
| Clock input frequency | 0 | 32 | MHz | Operating speed, clock input | 1 | ||
| Internal oscillator calibration accuracy | -1 | 1 | % | 16 MHz internal oscillator block, at calibration | 2 |
CAD (KiCad official)
- Symbol:
PIC16F1718T-I - Footprint:
Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm - 3D model: QFN-28-EP(6x6) (KiCad packages3D, STEP)
- 3D model files:
pic16f1718t-i-etched.step/pic16f1718t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f1718t-i.step/pic16f1718t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (18 pp, sha256
91827b6a20ffbd6f, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC16F1718T-I/ML. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16F1718T-I/SS