component
LW5433A23E
Public Made by Adomby adom
Lewa Micro Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLW5433A23E
Lewa Micro · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L
LW5433A23E from Lewa Micro, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin (1.9 V to 5.5 V); use the recommended or larger ceramic input capacitor placed as close to the device as possible. |
| 2 | GND | power_in | Ground pin. |
| 3 | EN | input | Enable pin: drive above VEN(HI) to turn the regulator on, and drive below VEN(LO) to put the LDO into shutdown mode. |
| 4 | NC | unconnected | No internal connection; the datasheet says to ground this pin for better thermal performance. |
| 5 | VOUT | power_out | Regulated output (1.2 V to 5.0 V) that needs a low-ESR capacitor, using the nominal recommended value or larger from OUT to GND; an internal pulldown discharges OUT in shutdown. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Lewa Micro |
| Package | SOT-23-5L |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
LW5433A23E - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
lw5433a23e-etched.step/lw5433a23e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lw5433a23e.step/lw5433a23e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Lewa Micro datasheet (23 pp, sha256
df31c2e49d16aac8, retrieved 2026-10-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).