Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

XTR117AIDGKT

Texas Instruments · Special Purpose Amplifiers · VSSOP-8

XTR117AIDGKT from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 NC unconnected Not connected (NC) pin, per the datasheet pin table; leave it unconnected.
2 IIN input Current input pin for the 4mA to 20mA loop signal (the datasheet lists it as a current input).
3 IRET power_in Local ground return pin for VREG; it senses current drawn by external circuitry so the output current stays accurate.
4 IO output Regulated 4mA to 20mA current-loop output.
5 E (Emitter) input Emitter connection for the external transistor.
6 B (Base) output Base connection for the external transistor.
7 V+ power_in Loop power supply; recommended range is 7.5V to 40V with 24V nominal, and absolute maximum is 40V referenced to the IO pin.
8 VREG power_out 5V regulator voltage output that can power external circuitry.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Amplifiers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output current, linear range 0.2 25 mA 6
Under-scale limit IMIN 0.13 0.2 mA IREG = 0 6
Span error -0.4 0.4 % IOUT = 200µA to 25mA 6
Span temperature coefficient -20 20 ppm/°C TA = -40°C to +125°C 6
Nonlinearity -0.02 0.02 % IOUT = 200µA to 25mA 6
Offset voltage (op amp) VOS -500 500 µV IIN = 40µA 6
Offset voltage drift -6 6 µV/°C TA = -40°C to +125°C 6
Offset voltage vs power supply -2 2 µV/V V+ = 7.5V to 36V 6
Voltage accuracy (VREG) -0.1 0.1 V IREG = 0, CSO: SHE 6
Quiescent current IQ 130 200 µA CSO: SHE 6
Quiescent current over temperature IQ 250 µA TA = -40°C to 125°C 6
V+ power supply voltage V+ 7.5 24 40 V 5
Specified temperature TA -40 125 °C 5
V+ power supply (referenced to IO pin) V+ 40 V referenced to IO pin 5
Input voltage (referenced to IRET pin) 0 V referenced to IRET pin 5
Operating temperature TA -40 125 °C 5
Storage temperature Tstg -55 150 °C 5
Junction temperature TJ 165 °C 5
Junction-to-ambient thermal resistance RθJA 173.9 °C/W DGK (VSSOP) package 5
Junction-to-board thermal resistance RθJB 95.2 °C/W DGK (VSSOP) package 5
Junction-to-top characterization parameter ψJT 11.1 °C/W DGK (VSSOP) package 5
Junction-to-board characterization parameter ψJB 93.7 °C/W DGK (VSSOP) package 5
Junction-to-case (top) thermal resistance RθJC(top) 66.3 °C/W DGK (VSSOP) package 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: XTR117AIDGKT
  • Footprint: Package_SO:VSSOP-8_3x3mm_P0.65mm
  • 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: xtr117aidgkt-etched.step / xtr117aidgkt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xtr117aidgkt.step / xtr117aidgkt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (27 pp, sha256 f1e9b04d320c7218, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF