component
AD5593RBCPZ-RL7
Public Made by Adomby adom
Analog Devices Pre-ordered Chips, LFCSP-16(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAD5593RBCPZ-RL7
Analog Devices · Pre-ordered Chips · LFCSP-16(3x3)
AD5593RBCPZ-RL7 from Analog Devices, in a LFCSP-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input that operates from 2.7 V to 5.5 V and should be decoupled with a 0.1 µF capacitor to GND. |
| 2 | I/O0 | bidirectional | Input/Output 0, independently configurable as DAC output, ADC input, or general-purpose digital input or output through the configuration registers. |
| 3 | I/O1 | bidirectional | Input/Output 1, independently configurable as DAC output, ADC input, or general-purpose digital input or output through the configuration registers. |
| 4 | I/O2 | bidirectional | Input/Output 2, independently configurable as DAC output, ADC input, or general-purpose digital input or output through the configuration registers. |
| 5 | I/O3 | bidirectional | Input/Output 3, independently configurable as DAC output, ADC input, or general-purpose digital input or output through the configuration registers. |
| 6 | VREF | power_in | Reference input/output that provides the 2.5 V internal reference when enabled (0.1 µF capacitor to GND recommended) or accepts an external reference of 1 V to VDD when the internal reference is disabled. |
| 7 | VLOGIC | power_in | Interface power supply with a voltage range of 1.8 V to 5.5 V. |
| 8 | I/O4 | bidirectional | Input/Output 4, independently configurable as DAC output, ADC input, or general-purpose digital input or output through the configuration registers. |
| 9 | I/O5 | bidirectional | Input/Output 5, independently configurable as DAC output, ADC input, or general-purpose digital input or output through the configuration registers. |
| 10 | I/O6 | bidirectional | Input/Output 6, independently configurable as DAC output, ADC input, or general-purpose digital input or output through the configuration registers. |
| 11 | I/O7 | bidirectional | Input/Output 7, independently configurable as DAC output, ADC input, or general-purpose digital input or output through the configuration registers. |
| 12 | GND | power_in | Ground reference point for all circuitry. |
| 13 | SDA | bidirectional | I2C serial data line, bidirectional open-drain, used with SCL to clock data in or out, and must be pulled to the VLOGIC supply with an external pull-up resistor. |
| 14 | SCL | input | I2C serial clock line, used with SDA to clock data in to or out of the 16-bit input register. |
| 15 | RESET | input | Asynchronous reset pin that is tied high for normal operation and resets the device to its default configuration when brought low. |
| 16 | A0 | input | Address input that sets the LSB of the 7-bit slave address. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | LFCSP-16(3x3) |
| Category | Interface ICs |
| Pins | 17 |
CAD (KiCad official)
- Symbol:
AD5593RBCPZ-RL7 - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: LFCSP-16(3x3) (KiCad packages3D, STEP)
- 3D model files:
ad5593rbcpz-rl7-etched.step/ad5593rbcpz-rl7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad5593rbcpz-rl7.step/ad5593rbcpz-rl7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (47 pp, sha256
4890cf7a18d9d0ba, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).