3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPTN3460BS/F2,518
NXP Semicon · LVDS ICs · QFN-56(7x7)
PTN3460BS from NXP Semicon, in a QFN-56(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AUX_N | bidirectional | Self-biasing differential AUX I/O towards the DP source, paired with AUX_P, and must be AC-coupled externally. |
| 2 | AUX_P | bidirectional | Self-biasing differential AUX I/O towards the DP source, paired with AUX_N, and must be AC-coupled externally. |
| 3 | GND | power_in | Ground. |
| 4 | DP0_P | input | Self-biasing differential input from the DP source, paired with DP0_N, and must be AC-coupled externally. |
| 5 | DP0_N | input | Self-biasing differential input from the DP source, paired with DP0_P, and must be AC-coupled externally. |
| 6 | VDD(1V8) | power_in | 1.8 V supply input. |
| 7 | DP1_P | input | Self-biasing differential input from the DP source, paired with DP1_N, and must be AC-coupled externally. |
| 8 | DP1_N | input | Self-biasing differential input from the DP source, paired with DP1_P, and must be AC-coupled externally. |
| 9 | RST_N | input | Active-LOW chip reset, internally pulled up; must be HIGH for the device to operate, and registers return to default after reset. |
| 10 | PD_N | input | Active-LOW chip power-down input; LOW puts the device in Deep power-down even if the supply is on, and it must be HIGH to operate. |
| 11 | HPDRX | output | Single-ended 3.3 V CMOS Hot Plug Detect output to the DP source, with an internal pull-down (>100 kOhm) to GND. |
| 12 | DEV_CFG | bidirectional | CMOS I/O pin for I2C-bus address/mode selection. |
| 13 | VDD(3V3) | power_in | 3.3 V supply input. |
| 14 | VDD(3V3) | power_in | 3.3 V supply input. |
| 15 | n.c. | unconnected | Not connected. |
| 16 | n.c. | unconnected | Not connected. |
| 17 | GNDREG | power_in | Ground for the regulator. |
| 18 | GNDREG | power_in | Ground for the regulator. |
| 19 | VDD(1V8) | power_out | 1.8 V regulator supply output. |
| 20 | TESTMODE | input | CMOS input; left open or HIGH makes CFG[4:1] JTAG pins, pulled LOW makes them configuration pins. |
| 21 | CFG1 | input | JTAG test clock input when TESTMODE is open or HIGH, configuration input when TESTMODE is LOW. |
| 22 | CFG2 | input | JTAG mode select input when TESTMODE is open or HIGH, configuration input when TESTMODE is LOW. |
| 23 | CFG3 | input | JTAG test data input when TESTMODE is open or HIGH, configuration input when TESTMODE is LOW (CFG3 LOW = 2-lane DP, HIGH = 1-lane DP). |
| 24 | MS_SDA | bidirectional | Open-drain I2C-bus data input/output to the I2C-bus master or slave, pulled up by an external resistor. |
| 25 | MS_SCL | bidirectional | Open-drain I2C-bus clock input/output to the I2C-bus master or slave, pulled up by an external resistor. |
| 26 | BKLTEN | output | CMOS backlight enable output. |
| 27 | CFG4 | bidirectional | JTAG test data output when TESTMODE is open or HIGH, configuration input when TESTMODE is LOW (also sets EDID emulation ON/OFF). |
| 28 | PWMO | output | CMOS PWM output signal to the display panel. |
| 29 | DDC_SCL | bidirectional | Open-drain DDC clock I/O to the display panel, pulled up by an external resistor (5 V tolerant). |
| 30 | DDC_SDA | bidirectional | Open-drain DDC data I/O to the display panel, pulled up by an external resistor (5 V tolerant). |
| 31 | LVSDE_P | output | LVDS output, even bus channel D positive, paired with LVSDE_N. |
| 32 | LVSDE_N | output | LVDS output, even bus channel D negative, paired with LVSDE_P. |
| 33 | PVCCEN | output | CMOS panel power (VCC) enable output. |
| 34 | LVSCKE_P | output | LVDS clock output, even bus positive, paired with LVSCKE_N. |
| 35 | LVSCKE_N | output | LVDS clock output, even bus negative, paired with LVSCKE_P. |
| 36 | LVSCE_P | output | LVDS output, even bus channel C positive, paired with LVSCE_N. |
| 37 | LVSCE_N | output | LVDS output, even bus channel C negative, paired with LVSCE_P. |
| 38 | VDD(3V3) | power_in | 3.3 V supply input. |
| 39 | LVSBE_P | output | LVDS output, even bus channel B positive, paired with LVSBE_N. |
| 40 | LVSBE_N | output | LVDS output, even bus channel B negative, paired with LVSBE_P. |
| 41 | LVSAE_P | output | LVDS output, even bus channel A positive, paired with LVSAE_N. |
| 42 | LVSAE_N | output | LVDS output, even bus channel A negative, paired with LVSAE_P. |
| 43 | LVSDO_P | output | LVDS output, odd bus channel D positive, paired with LVSDO_N. |
| 44 | LVSDO_N | output | LVDS output, odd bus channel D negative, paired with LVSDO_P. |
| 45 | VDD(1V8) | power_in | 1.8 V supply input. |
| 46 | LVSCKO_P | output | LVDS clock output, odd bus positive, paired with LVSCKO_N. |
| 47 | LVSCKO_N | output | LVDS clock output, odd bus negative, paired with LVSCKO_P. |
| 48 | LVSCO_P | output | LVDS output, odd bus channel C positive, paired with LVSCO_N. |
| 49 | LVSCO_N | output | LVDS output, odd bus channel C negative, paired with LVSCO_P. |
| 50 | VDD(3V3) | power_in | 3.3 V supply input. |
| 51 | LVSBO_P | output | LVDS output, odd bus channel B positive, paired with LVSBO_N. |
| 52 | LVSBO_N | output | LVDS output, odd bus channel B negative, paired with LVSBO_P. |
| 53 | LVSAO_P | output | LVDS output, odd bus channel A positive, paired with LVSAO_N. |
| 54 | LVSAO_N | output | LVDS output, odd bus channel A negative, paired with LVSAO_P. |
| 55 | n.c. | unconnected | Not connected; reserved. |
| 56 | EPS_N | input | Left open or pulled HIGH for 3.3 V-only operation using the internal 1.8 V regulator, and pulled to GND for the dual 3.3 V/1.8 V supply option. |
| 57 | GND | power_in | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | QFN-56(7x7) |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 57 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | temperature with tin/lead* MSL at the higher lead-free | 33 |
CAD (KiCad official)
- Symbol:
PTN3460BS - Footprint:
Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm - 3D model: QFN-56(7x7) (KiCad packages3D, STEP)
- 3D model files:
ptn3460bs-etched.step/ptn3460bs-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ptn3460bs.step/ptn3460bs.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (42 pp, sha256
d5b1f3a5e93af030, retrieved 2026-11-09, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PTN3460BS/F2,518. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PTN3460BS/F6Y