component
LM27342SD
Public Made by Adomby adom
Texas Instruments DC-DC Converters, WSON-10-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM27342SD
Texas Instruments · DC-DC Converters · WSON-10-EP(3x3)
LM27342SD from Texas Instruments, in a WSON-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Output switch that connects to the inductor, catch diode, and bootstrap capacitor; SW voltage is rated -0.5 V to 20 V recommended (24 V absolute maximum). |
| 2 | SW | output | Output switch that connects to the inductor, catch diode, and bootstrap capacitor; SW voltage is rated -0.5 V to 20 V recommended (24 V absolute maximum). |
| 3 | BOOST | input | Boost voltage that drives the internal NMOS control switch, with a bootstrap capacitor connected between BOOST and SW; Boost-to-SW voltage is limited to 3 V to 5.5 V recommended. |
| 4 | EN | input | Enable control input where logic high enables operation; do not let this pin float or exceed VIN + 0.3 V. |
| 5 | SYNC | input | Frequency synchronization input driven by an external clock or pulse train (1 MHz < fSW < 2.35 MHz), or grounded to use the internal 2 MHz clock. |
| 6 | FB | input | Feedback pin connected to the external resistor divider that sets the output voltage; FB voltage is limited to 3 V absolute maximum. |
| 7 | GND | power_in | Signal and power ground; place the bottom resistor of the feedback network as close as possible to this pin for accurate regulation. |
| 8 | AVIN | power_in | Supply voltage for the control circuitry, rated 3 V to 20 V recommended (24 V absolute maximum). |
| 9 | PVIN | power_in | Supply voltage for the output power stage; connect a bypass capacitor to this pin; rated 3 V to 20 V recommended (24 V absolute maximum). |
| 10 | PVIN | power_in | Supply voltage for the output power stage; connect a bypass capacitor to this pin; rated 3 V to 20 V recommended (24 V absolute maximum). |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-10-EP(3x3) |
| Category | Power Supply Chip |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
LM27342SD - Footprint:
Package_SON:VSON-10-1EP_3x3mm_P0.5mm_EP1.2x2mm - 3D model: WSON-10-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
lm27342sd-etched.step/lm27342sd-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm27342sd.step/lm27342sd.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (55 pp, sha256
cef0ca904e2ee532, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).