component
ECS-2520MV-480-CN-TR
Public Made by Adomby adom
ECS INC INTERNATIONAL Global Sourcing Parts, SMD2520-4P. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownECS-2520MV-480-CN-TR
ECS INC INTERNATIONAL · Global Sourcing Parts · SMD2520-4P
ECS-2520MV-480-CN-TR from ECS INC INTERNATIONAL, in a SMD2520-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Tri-state | tri_state | Output enable: the output is active when Pin 1 is at 0.7 × Vdd min or left NC, and goes high impedance when Pin 1 is at 0.3 × Vdd max. |
| 2 | Gnd | power_in | Ground pin for the oscillator supply. |
| 3 | Output | output | HCMOS clock output; VOL is 10% Vdd max and VOH is 90% Vdd min, with a 15 pF CMOS output load. |
| 4 | Vdd | power_in | Supply voltage pin, specified from 1.6 V to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ECS INC INTERNATIONAL |
| Package | SMD2520-4P |
| Category | Global Sourcing Parts |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency Stability | -25 | 25 | ppm | Part-number code C (±25 ppm); -40 ~ +85°C (N) | 1 | ||
| Supply Voltage | 1.6 | 3.6 | V | 1 | |||
| Operating Temp | -40 | 85 | °C | Part-number code N (-40 ~ +85°C) | 1 | ||
| Storage Temp | -55 | 125 | °C | 1 | |||
| Duty Cycle | 45 | 55 | % | @ ½ Vdd | 1 | ||
| Output voltage level LOW | VOL | 10 | %Vdd | Output voltage level as printed: VOL max 10%Vdd | 1 | ||
| Output voltage level HIGH | VOH | 90 | %Vdd | Output voltage level as printed: VOH min 90%Vdd | 1 | ||
| Rise & Fall time | 7 | ns | 10%Vdd, 90%Vdd | 1 | |||
| Start Up Time | 5 | mS | @90%Vdd | 1 | |||
| Phase Jitter | 1 | pS | 12 KHz to 5 MHz | 1 | |||
| Standby Current | 10 | µA | 1 | ||||
| Frequency Range | 0.75 | 60 | MHz | 1 | |||
| Current consumption at 1.8V (48 MHz, ~50 MHz column) | 3.5 | mA | Vdd +1.8V; frequency 48 MHz read in ~50 MHz column | 1 | |||
| Current consumption at 2.5V (48 MHz, ~50 MHz column) | 6.5 | mA | Vdd +2.5V; frequency 48 MHz read in ~50 MHz column | 1 | |||
| Current consumption at 3.0V (48 MHz, ~50 MHz column) | 7.5 | mA | Vdd +3.0V; frequency 48 MHz read in ~50 MHz column | 1 | |||
| Current consumption at 3.3V (48 MHz, ~50 MHz column) | 8 | mA | Vdd +3.3V; frequency 48 MHz read in ~50 MHz column | 1 | |||
| Nominal frequency (developed frequency code 480) | 48 | MHz | Part-number frequency code 480 | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | gold | MSL 1, Lead Finish Au DEVELOPED FREQUENCIES | 2 |
CAD (KiCad official)
- Symbol:
ECS-2520MV-480-CN-TR - Footprint:
Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm - 3D model: SMD2520-4P (KiCad packages3D, STEP)
- 3D model files:
ecs-2520mv-480-cn-tr-etched.step/ecs-2520mv-480-cn-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ecs-2520mv-480-cn-tr.step/ecs-2520mv-480-cn-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ECS INC INTERNATIONAL datasheet (2 pp, sha256
11d0beb0a9edb70f, retrieved 2026-10-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).