Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

FU6818Q

Fortior Tech · Motor Driver ICs · QFN-56(7x7)

FU6818Q from Fortior Tech, in a QFN-56(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VSU passive 6N Predriver U-phase input, used as the ground reference for the high-side U-phase bootstrap.
2 HU output 6N Predriver high-side U-phase PWM output.
3 VBU power_in 6N Predriver high-side U-phase bootstrap supply.
4 VSV passive 6N Predriver V-phase input, used as the ground reference for the high-side V-phase bootstrap.
5 HV output 6N Predriver high-side V-phase PWM output.
6 VBV power_in 6N Predriver high-side V-phase bootstrap supply.
7 VSW passive 6N Predriver W-phase input, used as the ground reference for the high-side W-phase bootstrap.
8 HW output 6N Predriver high-side W-phase PWM output.
9 VBW power_in 6N Predriver high-side W-phase bootstrap supply.
10 VCC power_in Power input with a 10uF or larger filter capacitor; mode 1 (VCC_MODE=0) takes 5V24V on VCC with VDD5 from the internal LDO, mode 2 (VCC_MODE=1) takes 3V5.5V on VDD5 with VCC shorted to VDD5.
11 VSS power_in Digital ground.
12 VDD5 power_in Medium-voltage supply input or internal 5V LDO output depending on VCC_MODE, with a 1uF~4.7uF capacitor.
13 VCC_MODE input Input power-mode control; see the VCC pin description for the modes.
14 RSTN/FICEK input External reset input with internal pull-up, also the FICE debug interface clock.
15 VDD18 power_out 1.85V LDO output supply with a 1uF~4.7uF capacitor.
16 VSS power_in Digital ground.
17 P1.2/FICED bidirectional GPIO configurable as external interrupt INT1 input, also the FICE data port.
18 P1.3/HBIAS/A3O bidirectional GPIO, Hall bias supply switched internally from VDD5 for high current output, and AMP3 output.
19 P1.4/C0P/A3M bidirectional GPIO with INT1 and optional 4.7K pull-up usable as Timer1 switch-type Hall0 input, differential Hall0/BEMF0 positive input, and AMP3 negative input.
20 P1.5/C0M/A3P bidirectional GPIO with INT1 and optional 4.7K pull-up, differential Hall0/BEMF0 negative input, and AMP3 positive input.
21 P1.6/C1P/A1P bidirectional GPIO with INT1 and optional 4.7K pull-up usable as Timer1 switch-type Hall1 input, differential Hall1/BEMF1 positive input, and AMP1 positive input for the phase-1 current signal.
22 P1.7/C1M/A1M bidirectional GPIO with optional 4.7K pull-up, differential Hall1/BEMF1 negative input, and AMP1 negative input.
23 P2.0/AD0/A1O bidirectional GPIO with INT1, ADC channel 0 input for the amplified phase-1 current, and AMP1 output.
24 P2.1/C2P/A2P bidirectional GPIO with INT1 and optional 4.7K pull-up usable as Timer1 switch-type Hall2 input, differential Hall2/BEMF2 positive input, and AMP2 positive input for the phase-2 current signal.
25 P2.2/C2M/A2M bidirectional GPIO with INT1 and optional 4.7K pull-up, differential Hall2/BEMF2 negative input, and AMP2 negative input.
26 P2.3/AD1/A2O bidirectional GPIO with INT1, ADC channel 1 input for the amplified phase-2 current, and AMP2 output.
27 P2.4/AD2 bidirectional GPIO with INT1 and ADC channel 2 input for the bus voltage signal.
28 P2.5/AD3 bidirectional GPIO with INT1 and ADC channel 3 input.
29 P2.6/C3M bidirectional GPIO with INT1 and overcurrent reference input, the CMP3 negative input.
30 P2.7/AD4/C3P/A0O bidirectional GPIO with INT1, ADC channel 4 input for the amplified bus current, CMP3 positive input for overcurrent detection, and AMP0 output.
31 P3.0/A0M bidirectional GPIO and AMP0 negative input for amplifying the bus current signal.
32 P3.1/A0P bidirectional GPIO and AMP0 positive input for amplifying the bus current signal.
33 P3.2/AD5/TIM0/VHALF bidirectional GPIO, over-temperature signal input on ADC channel 5, Advanced timer channel 4 output, and 1/2 VDD5 or 1/2 VREF reference output with a 1uF capacitor.
34 P3.3/AD6/RXD2/IR_RXD2 bidirectional GPIO, ADC channel 6 input, and UART2 / infrared data receive after function remap.
35 P3.4/AD7/TXD2/IR_TXD2 bidirectional GPIO, analog speed control input on ADC channel 7, and UART2 / infrared data transmit after function remap.
36 P3.5/VREF bidirectional GPIO, ADC external reference voltage input or internal VREF output, with a 1uF capacitor.
37 AVSS power_in Analog ground.
38 AVDD5 power_in Analog supply input, connected externally to VDD5 with a 1uF capacitor to AVSS.
39 P3.6/XIN/ECLK bidirectional GPIO, fast clock crystal input for an external 24MHz crystal, and external fast clock input.
40 P3.7/XOUT bidirectional GPIO and fast clock crystal output for the external 24MHz crystal.
41 P0.0/SDA bidirectional GPIO configurable as external interrupt INT0 input, and I2C SDA open-drain with optional 4.7K pull-up.
42 P0.1/SCL/TIM4 bidirectional GPIO, I2C SCL clock open-drain with optional 4.7K pull-up, and Timer4 input or output.
43 P0.2/LXIN bidirectional GPIO and 32768Hz crystal input.
44 P0.3/LXOUT bidirectional GPIO and 32768Hz crystal output.
45 P0.4/NSS bidirectional GPIO and SPI slave select port.
46 P0.5/MOSI/TXD/IR_TXD bidirectional GPIO, SPI MOSI (master out or slave in), and UART1 / infrared data transmit before function remap.
47 P0.6/MISO/RXD/IR_RXD bidirectional GPIO, SPI MISO (master in or slave out), and UART1 / infrared data receive before function remap.
48 P0.7/SCLK/TIM5/CXO bidirectional GPIO, SPI clock, Timer5 capture input or PWM output, and comparator output test pin.
49 P1.0/TIM2 bidirectional GPIO configurable as INT1 input, and Timer2 capture input or PWM output.
50 P1.1/TIM3 bidirectional GPIO configurable as INT1 input, and Timer3 capture input or PWM output.
51 VDRV power_in 6N Predriver supply input, 7V20V, with a 1uF10uF capacitor.
52 VSS power_in Digital ground.
53 NC unconnected No connect.
54 LU output 6N Predriver low-side U-phase PWM output.
55 LV output 6N Predriver low-side V-phase PWM output.
56 LW output 6N Predriver low-side W-phase PWM output (datasheet text says V phase, likely a typo).
57 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Fortior Tech
Package QFN-56(7x7)
Category Power Supply Chip
Pins 57

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
TJ工作时结温 TJ -40 150 ℃ 69
储存温度 -55 150 ℃ 69
VCC 相对 VSS 的电压 VCC -0.3 36 V 69
VDD5 相对 VSS 的电压 VDD5 -0.3 6.5 V 69
RSTN、VCC_MODE、GPIO 相对 VSS 的电压 -0.3 V 69
VDRV 相对 VSS 的电压 VDRV -0.3 20 V 69
高侧浮动电压 VBU,VBV,VBW VBU,VBV,VBW -0.3 205 V 69
低侧输出电压 VLU,LV,LW VLU,LV,LW -0.3 V 69
VCC 工作电压 单电源高压模式 VCC 5 24 V 单电源高压模式, TA = -40℃ ~ 85℃ 71
VCC 工作电压 双电源高压模式 VCC 5 36 V 双电源高压模式, VCC_MODE = 1, VCC ≥ VDD5[2], TA = -40℃ ~ 85℃ 71
VDD5 工作电压 VDD5 3 5.5 V VCC_MODE = 1,VCC 与 VDD5 连接[2] 71
VBU,VBV,VBW 相对 VSU,VSV,VSW电压 VBU,VBV,VBW 20 V 71
IVCC睡眠电流 IVCC 350 650 μA VCC_MODE = 0 71
IVCC睡眠电流 IVCC 300 500 μA VCC_MODE = 1,VCC = VDD5 = 5V 71
高侧浮动电压 VBU,BV,BW VBU,BV,BW 180 V 78
VDRV 欠压保护开启电压 4.2 4.6 5 V 78
VDRV 欠压保护关断电压 3.9 4.3 4.7 V 78
VDRV 欠压保护迟滞电压 0.2 0.3 V 78
输出上升时间 12 25 ns 1nF 负载, 从 10%上升至 90%时间 78
输出下降时间 12 25 ns 1nF 负载, 从 90%下降至 10%时间 78
VDD5 电压 VDD5 4.7 5 5.3 V VCC = 7V ~ 24V,VCC_MODE = 0, TA = -40℃~ 85℃ 82
VREF_CR[VREFVSEL] = 10 VREF 4.3 4.5 4.7 V VREF_CR[VREFVSEL] = 10 80
VICMR共模输入范围 VICMR 0 V 80
VOS运放的失配电压 VOS 5 10 mV TA = 25℃ 80
UGBW 单位增益带宽 UGBW 6 10 MHz CL = 40pF 80
SR 运放的摆率 SR 10 15 V/μs CL = 40pF 80
BEMF 内置电阻 5.4 6.8 8.2 KΩ 81
系统时钟频率 23.5 24 24.5 MHz 81
低速时钟频率 29 32.8 37 KHz 81
RSTN 复位低电平最小宽度 25 50 μs 81
ΘJA 芯片结温相对环境温度 ΘJA 33 ℃/W JEDEC 标准,2S2P PCB 83
ΘJA 芯片结温相对环境温度 ΘJA 55 ℃/W JEDEC 标准,1S0P PCB 83
ΘJC 芯片结温相对封装表面温度 ΘJC 9.2 ℃/W JEDEC 标准,1S0P PCB 83

CAD (KiCad official)

  • Symbol: FU6818Q
  • Footprint: Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm
  • 3D model: QFN-56(7x7) (KiCad packages3D, STEP)
  • 3D model files: fu6818q-etched.step / fu6818q-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); fu6818q.step / fu6818q.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Fortior Tech datasheet (292 pp, sha256 d5a21e4e7fe9a48c, retrieved 2026-11-10, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF